main
Ray tlk105rhbr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) fe8952a
{
  "slug": "tlk105rhbr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Ethernet Transceivers, VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "tlk105rhbr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tlk105rhbr.kicad_sym",
    "tlk105rhbr.kicad_mod",
    "tlk105rhbr.glb",
    "tlk105rhbr.step",
    "tlk105rhbr.lbr",
    "docs/hero.png",
    "docs/tlk105rhbr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "TLK105RHBR",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-32-EP(5x5)",
    "pin_count": 33,
    "category": "Interface",
    "subcategory": "Ethernet Transceivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tlk105",
    "parts": {
      "symbol": "tlk105rhbr.kicad_sym",
      "footprint": "tlk105rhbr.kicad_mod",
      "model_3d": "tlk105rhbr-etched.glb",
      "model_3d_plain": "tlk105rhbr.glb",
      "model_3d_step": "tlk105rhbr-etched.step",
      "model_3d_step_plain": "tlk105rhbr.step",
      "lbr": "tlk105rhbr.lbr"
    },
    "distributor_links": {
      "lcsc": "C337498"
    },
    "pins": [
      {
        "number": "1",
        "name": "RXD_3 / PHYAD4",
        "type": "output",
        "description": "Receive Data 3 or PHY Address 4; decoded receive data symbol output synchronous to RX_CLK with weak internal pulldown for address configuration."
      },
      {
        "number": "2",
        "name": "TX_CLK",
        "type": "output",
        "description": "Transmit Clock providing 25MHz or 2.5MHz reference clock for MII mode; constant phase relationship to REF_CLK."
      },
      {
        "number": "3",
        "name": "TX_EN",
        "type": "input",
        "description": "Transmit Enable active-high input indicating valid data on TXD[3:0] in MII or TXD[1:0] in RMII mode with internal pulldown."
      },
      {
        "number": "4",
        "name": "TXD_0",
        "type": "input",
        "description": "Transmit Data 0 input with internal pulldown; synchronous to TX_CLK rising edge in MII mode."
      },
      {
        "number": "5",
        "name": "TXD_1",
        "type": "input",
        "description": "Transmit Data 1 input with internal pulldown; synchronous to TX_CLK rising edge in MII mode."
      },
      {
        "number": "6",
        "name": "TXD_2",
        "type": "input",
        "description": "Transmit Data 2 input with internal pulldown; synchronous to TX_CLK rising edge in MII mode."
      },
      {
        "number": "7",
        "name": "TXD_3",
        "type": "input",
        "description": "Transmit Data 3 input with internal pulldown; synchronous to TX_CLK rising edge in MII mode."
      },
      {
        "number": "8",
        "name": "INT / PWDN",
        "type": "bidirectional",
        "description": "Interrupt/Power Down open-drain output with weak internal pullup; default active-low power-down control, configurable as active-low interrupt output via register access."
      },
      {
        "number": "9",
        "name": "RD–",
        "type": "bidirectional",
        "description": "Receive Differential Minus pair input accepting 100Base-TX or 10Base-T signaling with 3.3V bias; in Auto-MDIX can serve as transmit output with 16kV HBM ESD protection."
      },
      {
        "number": "10",
        "name": "RD+",
        "type": "bidirectional",
        "description": "Receive Differential Plus pair input accepting 100Base-TX or 10Base-T signaling with 3.3V bias; in Auto-MDIX can serve as transmit output with 16kV HBM ESD protection."
      },
      {
        "number": "11",
        "name": "TD–",
        "type": "bidirectional",
        "description": "Transmit Differential Minus pair output configured for 10Base-T or 100Base-TX signaling with 3.3V bias; in Auto-MDIX can serve as receive input with 16kV HBM ESD protection."
      },
      {
        "number": "12",
        "name": "TD+",
        "type": "bidirectional",
        "description": "Transmit Differential Plus pair output configured for 10Base-T or 100Base-TX signaling with 3.3V bias; in Auto-MDIX can serve as receive input with 16kV HBM ESD protection."
      },
      {
        "number": "13",
        "name": "PFBIN1",
        "type": "power_in",
        "description": "Power Feedback Input 1 fed from PFBOUT in single-supply operation or external 1.55V supply in dual-supply operation; 0.1µF bypass capacitor required."
      },
      {
        "number": "14",
        "name": "AVDD33",
        "type": "power_in",
        "description": "Analog 3.3V power supply for AFE and analog circuitry; 10µF and 0.1µF bypass capacitors required close to pin."
      },
      {
        "number": "15",
        "name": "PFBOUT",
        "type": "power_out",
        "description": "Power Feedback Output from internal regulator in single-supply operation; requires 10µF and 0.1µF capacitors and connection to PFBIN1/PFBIN2."
      },
      {
        "number": "16",
        "name": "RBIAS",
        "type": "passive",
        "description": "Bias Resistor connection point; connect 4.87kΩ 1% resistor from this pin to GND for bias current generation."
      },
      {
        "number": "17",
        "name": "LED_LINK / AN_0",
        "type": "output",
        "description": "LED Link output or Auto-Negotiation Mode select; indicates link status (Mode 1) or link and activity (Mode 2) with internal pullup for full-duplex configuration."
      },
      {
        "number": "18",
        "name": "RESET",
        "type": "input",
        "description": "Active-low reset input with internal pullup; minimum 1µs low pulse initiates full device reset and re-latches hardware configuration pins."
      },
      {
        "number": "19",
        "name": "MDIO",
        "type": "bidirectional",
        "description": "Management Data I/O bidirectional signal synchronized to MDC for serial management interface; requires external 2.2kΩ pullup resistor."
      },
      {
        "number": "20",
        "name": "MDC",
        "type": "input",
        "description": "Management Data Clock input for serial management interface with maximum rate 25MHz; not required synchronous to TX_CLK or RX_CLK."
      },
      {
        "number": "21",
        "name": "VDD_IO",
        "type": "power_in",
        "description": "I/O power supply selectable as 3.3V, 2.5V, or 1.8V (MII mode only) for digital I/O logic levels with decoupling capacitor required."
      },
      {
        "number": "22",
        "name": "XO",
        "type": "output",
        "description": "Crystal oscillator output for crystal connection; leave floating when external CMOS-level oscillator connected to XI pin."
      },
      {
        "number": "23",
        "name": "XI",
        "type": "input",
        "description": "Crystal/Oscillator input accepting 25MHz (MII) or 50MHz (RMII) reference clock with ±50ppm tolerance from external oscillator or crystal resonator."
      },
      {
        "number": "24",
        "name": "PFBIN2",
        "type": "power_in",
        "description": "Power Feedback Input 2 fed from PFBOUT in single-supply operation or external 1.55V supply in dual-supply operation; 0.1µF bypass capacitor required."
      },
      {
        "number": "25",
        "name": "RX_CLK",
        "type": "output",
        "description": "Receive Clock output providing 25MHz or 2.5MHz recovered clock derived from received data stream in MII mode; unused in RMII mode."
      },
      {
        "number": "26",
        "name": "RX_DV / MII_MODE",
        "type": "output",
        "description": "Receive Data Valid output or Mode select configuration pin; indicates valid data on RXD[3:0] for MII or RXD[1:0] for RMII with internal pulldown; strapping sets MII/RMII mode."
      },
      {
        "number": "27",
        "name": "CRS / CRS_DV / LED_CFG",
        "type": "output",
        "description": "Carrier Sense or Carrier Sense/Receive Data Valid output or LED Configuration pin; asserts high when receive medium non-idle in MII/RMII with internal pullup."
      },
      {
        "number": "28",
        "name": "RX_ER / AMDIX_EN",
        "type": "output",
        "description": "Receive Error output indicating error symbol detection synchronous to RX_CLK or Auto-MDIX Enable configuration pin with internal pullup."
      },
      {
        "number": "29",
        "name": "COL / PHYAD0",
        "type": "output",
        "description": "Collision Detect output or PHY Address 0; asserts high in half-duplex when both transmit and receive media active; always low in full-duplex with internal pullup."
      },
      {
        "number": "30",
        "name": "RXD_0 / PHYAD1",
        "type": "output",
        "description": "Receive Data 0 or PHY Address 1; decoded receive data output synchronous to RX_CLK with weak internal pulldown for address configuration."
      },
      {
        "number": "31",
        "name": "RXD_1 / PHYAD2",
        "type": "output",
        "description": "Receive Data 1 or PHY Address 2; decoded receive data output synchronous to RX_CLK with weak internal pulldown for address configuration."
      },
      {
        "number": "32",
        "name": "RXD_2 / PHYAD3",
        "type": "output",
        "description": "Receive Data 2 or PHY Address 3; decoded receive data output synchronous to RX_CLK with weak internal pulldown for address configuration."
      },
      {
        "number": "33",
        "name": "GND",
        "type": "power_in",
        "description": "Ground and exposed thermal pad on bottom of package; must be soldered for thermal performance; thermal via guidelines: 0.2mm vias, 4 vias minimum, 2mm center-to-center spacing."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pins 1, 30-32 and 29 have multiplexed functions (RXD/PHYAD and COL/PHYAD0) that are sampled at diffe",
          "1/33 pins cited to the wrong page (name found elsewhere): ['33:GND@p36']"
        ],
        "pages_sent": 101,
        "cost_usd": 1.1165,
        "at": "2026-09-24T08:28:37"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tlk105",
        "pages": 101,
        "sha256": "348238b64fbb769a",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tlk105rhbr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tlk105rhbr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e053b7d620959dd7ddbf78587da9e294e208369779106e2c3c79d3844ca7c192",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}