main
Ray Set visibility: public b0362f7
{
  "schema_version": 1,
  "type": "component",
  "slug": "tlk105lrhbt",
  "title": "TLK105LRHBT",
  "brief": "Texas Instruments Ethernet Transceivers, VQFN-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "tlk105lrhbt",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TLK105LRHBT",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-32(5x5)",
    "pin_count": 33,
    "category": "Interface",
    "subcategory": "Ethernet Transceivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tlk105l",
    "parts": {
      "symbol": "tlk105lrhbt.kicad_sym",
      "footprint": "tlk105lrhbt.kicad_mod",
      "model_3d": "tlk105lrhbt-hero.glb",
      "model_3d_plain": "tlk105lrhbt.glb",
      "model_3d_step": "tlk105lrhbt-etched.step",
      "model_3d_step_plain": "tlk105lrhbt.step",
      "lbr": "tlk105lrhbt.lbr"
    },
    "distributor_links": {
      "lcsc": "C3225664",
      "digikey": "296-39561-2-ND",
      "mouser": "595-TLK105LRHBT"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T15:04:14Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-39561-2-ND",
        "status": "found",
        "lifecycle": "Not For New Designs"
      },
      "mouser": {
        "pn": "595-TLK105LRHBT",
        "status": "found",
        "lifecycle": "Not Recommended for New Designs"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RXD_3 / PHYAD4",
        "type": "output",
        "description": "Receive data bit 3 for MII mode, synchronous to RX_CLK, multiplexed with PHY address bit PHYAD4 which is latched at power-up and hardware reset and is pulled down by default."
      },
      {
        "number": "2",
        "name": "TX_CLK",
        "type": "output",
        "description": "MII transmit clock providing a 25 MHz or 2.5 MHz reference depending on speed; unused in RMII mode."
      },
      {
        "number": "3",
        "name": "TX_EN",
        "type": "input",
        "description": "Transmit enable, presented on the rising edge of TX_CLK, indicating valid TXD data, active high; TXD[3:0] in MII mode and TXD[1:0] in RMII mode."
      },
      {
        "number": "4",
        "name": "TXD_0",
        "type": "input",
        "description": "Transmit data bit 0 from the MAC, synchronous to TX_CLK in MII mode or to the 50 MHz XI reference in RMII mode."
      },
      {
        "number": "5",
        "name": "TXD_1",
        "type": "input",
        "description": "Transmit data bit 1 from the MAC, synchronous to TX_CLK in MII mode or to the 50 MHz XI reference in RMII mode."
      },
      {
        "number": "6",
        "name": "TXD_2",
        "type": "input",
        "description": "Transmit data bit 2 from the MAC, used in MII mode, synchronous to TX_CLK."
      },
      {
        "number": "7",
        "name": "TXD_3",
        "type": "input",
        "description": "Transmit data bit 3 from the MAC, used in MII mode, synchronous to TX_CLK."
      },
      {
        "number": "8",
        "name": "INT / PWDN",
        "type": "bidirectional",
        "description": "Default function is active-low power-down input; when set as interrupt it is an open-drain output with weak internal pull-up that may need an external pull-up, and register access is required to select the function."
      },
      {
        "number": "9",
        "name": "RD-",
        "type": "bidirectional",
        "description": "Differential receive input (PMD input pair) automatically configured for 10Base-T or 100Base-TX, requires 3.3 V bias, and can be used as transmit output in Auto-MDIX mode."
      },
      {
        "number": "10",
        "name": "RD+",
        "type": "bidirectional",
        "description": "Differential receive input (PMD input pair) automatically configured for 10Base-T or 100Base-TX, requires 3.3 V bias, and can be used as transmit output in Auto-MDIX mode."
      },
      {
        "number": "11",
        "name": "TD-",
        "type": "bidirectional",
        "description": "Differential transmit output (PMD output pair) automatically configured for 10Base-T or 100Base-TX, requires 3.3 V bias, and can be used as receive input in Auto-MDIX mode."
      },
      {
        "number": "12",
        "name": "TD+",
        "type": "bidirectional",
        "description": "Differential transmit output (PMD output pair) automatically configured for 10Base-T or 100Base-TX, requires 3.3 V bias, and can be used as receive input in Auto-MDIX mode."
      },
      {
        "number": "13",
        "name": "PFBIN1",
        "type": "input",
        "description": "Power feedback input fed from PFBOUT in single-supply operation, or connected to a 1.55 V external supply in multiple-supply operation with a 0.1 µF capacitor close to the pin."
      },
      {
        "number": "14",
        "name": "AVDD33",
        "type": "power_in",
        "description": "Analog 3.3 V power supply."
      },
      {
        "number": "15",
        "name": "PFBOUT",
        "type": "output",
        "description": "Power feedback output with 10 µF and 0.1 µF ceramic capacitors placed close to it; connected to PFBIN1 and PFBIN2 in single-supply operation and not used in multiple-supply operation."
      },
      {
        "number": "16",
        "name": "RBIAS",
        "type": "input",
        "description": "Bias resistor connection, using a 4.87 kΩ 1% resistor connected from RBIAS to GND."
      },
      {
        "number": "17",
        "name": "LED_LINK (MLED) / AN_0",
        "type": "output",
        "description": "LED pin indicating link status (Mode 1) or link with activity blink (Mode 2); AN_0 is also a power-up/reset strap that selects the advertised duplex mode."
      },
      {
        "number": "18",
        "name": "RESET",
        "type": "input",
        "description": "Active-low reset input; asserting low for at least 1 µs reinitializes all internal registers and re-latches the jumper options."
      },
      {
        "number": "19",
        "name": "MDIO",
        "type": "bidirectional",
        "description": "Management data I/O synchronized to MDC, which may be driven by the controller or the TLK10xL, and requires a 2.2 kΩ pull-up resistor."
      },
      {
        "number": "20",
        "name": "MDC",
        "type": "input",
        "description": "Management data clock with a maximum rate of 25 MHz and no minimum rate, not required to be synchronous to TX_CLK or RX_CLK."
      },
      {
        "number": "21",
        "name": "VDD_IO",
        "type": "power_in",
        "description": "Digital I/O supply of 3.3 V (3.0 to 3.6 V), 2.5 V (2.25 to 2.75 V), or 1.8 V (1.62 to 1.98 V, MII mode only)."
      },
      {
        "number": "22",
        "name": "XO",
        "type": "output",
        "description": "Crystal output for a 25 MHz crystal only; leave floating when an oscillator drives XI."
      },
      {
        "number": "23",
        "name": "XI",
        "type": "input",
        "description": "Crystal or CMOS oscillator input: 25 MHz ±50 ppm in MII mode, or 50 MHz ±50 ppm CMOS oscillator in RMII mode, with the oscillator referenced to the VDD_IO voltage (RMII not supported with 1.8 V reference)."
      },
      {
        "number": "24",
        "name": "PFBIN2",
        "type": "input",
        "description": "Power feedback input fed from PFBOUT in single-supply operation, or connected to a 1.55 V external supply in multiple-supply operation with a 0.1 µF capacitor close to the pin."
      },
      {
        "number": "25",
        "name": "RX_CLK",
        "type": "output",
        "description": "MII receive clock providing 25 MHz or 2.5 MHz depending on speed, derived from the received data stream."
      },
      {
        "number": "26",
        "name": "RX_DV / MII_MODE",
        "type": "output",
        "description": "Receive data valid indicating valid RXD data independent of carrier sense; also a power-up configuration strap for MII_MODE."
      },
      {
        "number": "27",
        "name": "CRS / CRS_DV / LED_CFG",
        "type": "output",
        "description": "Carrier sense asserted when the MII receive medium is non-idle, or combined carrier sense and receive data valid in RMII mode; also the LED_CFG strap."
      },
      {
        "number": "28",
        "name": "RX_ER / AMDIX_EN",
        "type": "output",
        "description": "Receive error indication synchronous to RX_CLK in MII mode or XI in RMII mode, not required by the MAC because the PHY corrupts data on receive error; also the AMDIX_EN strap."
      },
      {
        "number": "29",
        "name": "COL (MLED) / PHYAD0",
        "type": "output",
        "description": "Collision detect, always low in full duplex and not used in RMII mode; multiplexed with the PHYAD0 LSB address input (pulled up) and can carry the MLED output."
      },
      {
        "number": "30",
        "name": "RXD_0 / PHYAD1",
        "type": "output",
        "description": "Receive data bit 0 synchronous to RX_CLK, valid when RX_DV is asserted; multiplexed with PHY address bit PHYAD1 (pulled down)."
      },
      {
        "number": "31",
        "name": "RXD_1 / PHYAD2",
        "type": "output",
        "description": "Receive data bit 1 synchronous to RX_CLK, valid when RX_DV is asserted (RMII uses RXD[1:0]); multiplexed with PHY address bit PHYAD2 (pulled down)."
      },
      {
        "number": "32",
        "name": "RXD_2 / PHYAD3",
        "type": "output",
        "description": "Receive data bit 2 synchronous to RX_CLK, part of the MII RXD[3:0] nibble; multiplexed with PHY address bit PHYAD3 (pulled down)."
      },
      {
        "number": "33",
        "name": "GND",
        "type": "power_in",
        "description": "Ground exposed pad (DOWN_PAD); it must be soldered down to achieve the stated ESD rating on the Ethernet network pins."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN TLK105LRHBT is listed in the ordering table (page 106) as VQFN (RHB), 32 pins, 250-piece sma; The pin diagram text on page 7 is scrambled, so pin numbers were taken from the pin tables on pages ; The exposed ground pad is not given a number in the pin tables. It is identified as pin 33 only in t"
        ],
        "pages_sent": 23,
        "cost_usd": 0.137,
        "at": "2026-10-11T15:03:58"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tlk105l",
        "pages": 114,
        "sha256": "83ab6da6f71b8024",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tlk105lrhbt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.875
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tlk105lrhbt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.875
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "c90f1621d8ecb025ebd3a2467af1cf72d0f7496f4303c1569a9355c265058628",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "VQFN-32(5x5)",
      "Category": "Interface",
      "Pins": "33"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tlk105lrhbt"
  ],
  "discovery_pitch": "TLK105LRHBT (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tlk105lrhbt.kicad_sym",
    "tlk105lrhbt.kicad_mod",
    "tlk105lrhbt.glb",
    "tlk105lrhbt.step",
    "tlk105lrhbt.lbr",
    "docs/hero.png",
    "docs/tlk105lrhbt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tlk105lrhbt-hero.glb",
    "tlk105lrhbt-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}