main
Ray
Publish 0.1.0
73f7338
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345
{
"slug": "tlk105lrhbt",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Ethernet Transceivers, VQFN-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface",
"tlk105lrhbt",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"tlk105lrhbt.kicad_sym",
"tlk105lrhbt.kicad_mod",
"tlk105lrhbt.glb",
"tlk105lrhbt.step",
"tlk105lrhbt.lbr",
"docs/hero.png",
"docs/tlk105lrhbt-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"tlk105lrhbt-hero.glb",
"tlk105lrhbt-hero.overlay.json"
],
"component": {
"mpn": "TLK105LRHBT",
"manufacturer": "Texas Instruments",
"package": "VQFN-32(5x5)",
"pin_count": 33,
"category": "Interface",
"subcategory": "Ethernet Transceivers",
"datasheet": "https://www.ti.com/cn/lit/gpn/tlk105l",
"parts": {
"symbol": "tlk105lrhbt.kicad_sym",
"footprint": "tlk105lrhbt.kicad_mod",
"model_3d": "tlk105lrhbt-hero.glb",
"model_3d_plain": "tlk105lrhbt.glb",
"model_3d_step": "tlk105lrhbt-etched.step",
"model_3d_step_plain": "tlk105lrhbt.step",
"lbr": "tlk105lrhbt.lbr"
},
"distributor_links": {
"lcsc": "C3225664",
"digikey": "296-39561-2-ND",
"mouser": "595-TLK105LRHBT"
},
"distributor_check": {
"checked_at": "2026-10-11T15:04:14Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-39561-2-ND",
"status": "found",
"lifecycle": "Not For New Designs"
},
"mouser": {
"pn": "595-TLK105LRHBT",
"status": "found",
"lifecycle": "Not Recommended for New Designs"
}
},
"pins": [
{
"number": "1",
"name": "RXD_3 / PHYAD4",
"type": "output",
"description": "Receive data bit 3 for MII mode, synchronous to RX_CLK, multiplexed with PHY address bit PHYAD4 which is latched at power-up and hardware reset and is pulled down by default."
},
{
"number": "2",
"name": "TX_CLK",
"type": "output",
"description": "MII transmit clock providing a 25 MHz or 2.5 MHz reference depending on speed; unused in RMII mode."
},
{
"number": "3",
"name": "TX_EN",
"type": "input",
"description": "Transmit enable, presented on the rising edge of TX_CLK, indicating valid TXD data, active high; TXD[3:0] in MII mode and TXD[1:0] in RMII mode."
},
{
"number": "4",
"name": "TXD_0",
"type": "input",
"description": "Transmit data bit 0 from the MAC, synchronous to TX_CLK in MII mode or to the 50 MHz XI reference in RMII mode."
},
{
"number": "5",
"name": "TXD_1",
"type": "input",
"description": "Transmit data bit 1 from the MAC, synchronous to TX_CLK in MII mode or to the 50 MHz XI reference in RMII mode."
},
{
"number": "6",
"name": "TXD_2",
"type": "input",
"description": "Transmit data bit 2 from the MAC, used in MII mode, synchronous to TX_CLK."
},
{
"number": "7",
"name": "TXD_3",
"type": "input",
"description": "Transmit data bit 3 from the MAC, used in MII mode, synchronous to TX_CLK."
},
{
"number": "8",
"name": "INT / PWDN",
"type": "bidirectional",
"description": "Default function is active-low power-down input; when set as interrupt it is an open-drain output with weak internal pull-up that may need an external pull-up, and register access is required to select the function."
},
{
"number": "9",
"name": "RD-",
"type": "bidirectional",
"description": "Differential receive input (PMD input pair) automatically configured for 10Base-T or 100Base-TX, requires 3.3 V bias, and can be used as transmit output in Auto-MDIX mode."
},
{
"number": "10",
"name": "RD+",
"type": "bidirectional",
"description": "Differential receive input (PMD input pair) automatically configured for 10Base-T or 100Base-TX, requires 3.3 V bias, and can be used as transmit output in Auto-MDIX mode."
},
{
"number": "11",
"name": "TD-",
"type": "bidirectional",
"description": "Differential transmit output (PMD output pair) automatically configured for 10Base-T or 100Base-TX, requires 3.3 V bias, and can be used as receive input in Auto-MDIX mode."
},
{
"number": "12",
"name": "TD+",
"type": "bidirectional",
"description": "Differential transmit output (PMD output pair) automatically configured for 10Base-T or 100Base-TX, requires 3.3 V bias, and can be used as receive input in Auto-MDIX mode."
},
{
"number": "13",
"name": "PFBIN1",
"type": "input",
"description": "Power feedback input fed from PFBOUT in single-supply operation, or connected to a 1.55 V external supply in multiple-supply operation with a 0.1 µF capacitor close to the pin."
},
{
"number": "14",
"name": "AVDD33",
"type": "power_in",
"description": "Analog 3.3 V power supply."
},
{
"number": "15",
"name": "PFBOUT",
"type": "output",
"description": "Power feedback output with 10 µF and 0.1 µF ceramic capacitors placed close to it; connected to PFBIN1 and PFBIN2 in single-supply operation and not used in multiple-supply operation."
},
{
"number": "16",
"name": "RBIAS",
"type": "input",
"description": "Bias resistor connection, using a 4.87 kΩ 1% resistor connected from RBIAS to GND."
},
{
"number": "17",
"name": "LED_LINK (MLED) / AN_0",
"type": "output",
"description": "LED pin indicating link status (Mode 1) or link with activity blink (Mode 2); AN_0 is also a power-up/reset strap that selects the advertised duplex mode."
},
{
"number": "18",
"name": "RESET",
"type": "input",
"description": "Active-low reset input; asserting low for at least 1 µs reinitializes all internal registers and re-latches the jumper options."
},
{
"number": "19",
"name": "MDIO",
"type": "bidirectional",
"description": "Management data I/O synchronized to MDC, which may be driven by the controller or the TLK10xL, and requires a 2.2 kΩ pull-up resistor."
},
{
"number": "20",
"name": "MDC",
"type": "input",
"description": "Management data clock with a maximum rate of 25 MHz and no minimum rate, not required to be synchronous to TX_CLK or RX_CLK."
},
{
"number": "21",
"name": "VDD_IO",
"type": "power_in",
"description": "Digital I/O supply of 3.3 V (3.0 to 3.6 V), 2.5 V (2.25 to 2.75 V), or 1.8 V (1.62 to 1.98 V, MII mode only)."
},
{
"number": "22",
"name": "XO",
"type": "output",
"description": "Crystal output for a 25 MHz crystal only; leave floating when an oscillator drives XI."
},
{
"number": "23",
"name": "XI",
"type": "input",
"description": "Crystal or CMOS oscillator input: 25 MHz ±50 ppm in MII mode, or 50 MHz ±50 ppm CMOS oscillator in RMII mode, with the oscillator referenced to the VDD_IO voltage (RMII not supported with 1.8 V reference)."
},
{
"number": "24",
"name": "PFBIN2",
"type": "input",
"description": "Power feedback input fed from PFBOUT in single-supply operation, or connected to a 1.55 V external supply in multiple-supply operation with a 0.1 µF capacitor close to the pin."
},
{
"number": "25",
"name": "RX_CLK",
"type": "output",
"description": "MII receive clock providing 25 MHz or 2.5 MHz depending on speed, derived from the received data stream."
},
{
"number": "26",
"name": "RX_DV / MII_MODE",
"type": "output",
"description": "Receive data valid indicating valid RXD data independent of carrier sense; also a power-up configuration strap for MII_MODE."
},
{
"number": "27",
"name": "CRS / CRS_DV / LED_CFG",
"type": "output",
"description": "Carrier sense asserted when the MII receive medium is non-idle, or combined carrier sense and receive data valid in RMII mode; also the LED_CFG strap."
},
{
"number": "28",
"name": "RX_ER / AMDIX_EN",
"type": "output",
"description": "Receive error indication synchronous to RX_CLK in MII mode or XI in RMII mode, not required by the MAC because the PHY corrupts data on receive error; also the AMDIX_EN strap."
},
{
"number": "29",
"name": "COL (MLED) / PHYAD0",
"type": "output",
"description": "Collision detect, always low in full duplex and not used in RMII mode; multiplexed with the PHYAD0 LSB address input (pulled up) and can carry the MLED output."
},
{
"number": "30",
"name": "RXD_0 / PHYAD1",
"type": "output",
"description": "Receive data bit 0 synchronous to RX_CLK, valid when RX_DV is asserted; multiplexed with PHY address bit PHYAD1 (pulled down)."
},
{
"number": "31",
"name": "RXD_1 / PHYAD2",
"type": "output",
"description": "Receive data bit 1 synchronous to RX_CLK, valid when RX_DV is asserted (RMII uses RXD[1:0]); multiplexed with PHY address bit PHYAD2 (pulled down)."
},
{
"number": "32",
"name": "RXD_2 / PHYAD3",
"type": "output",
"description": "Receive data bit 2 synchronous to RX_CLK, part of the MII RXD[3:0] nibble; multiplexed with PHY address bit PHYAD3 (pulled down)."
},
{
"number": "33",
"name": "GND",
"type": "power_in",
"description": "Ground exposed pad (DOWN_PAD); it must be soldered down to achieve the stated ESD rating on the Ethernet network pins."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The MPN TLK105LRHBT is listed in the ordering table (page 106) as VQFN (RHB), 32 pins, 250-piece sma; The pin diagram text on page 7 is scrambled, so pin numbers were taken from the pin tables on pages ; The exposed ground pad is not given a number in the pin tables. It is identified as pin 33 only in t"
],
"pages_sent": 23,
"cost_usd": 0.137,
"at": "2026-10-11T15:03:58"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/tlk105l",
"pages": 114,
"sha256": "83ab6da6f71b8024",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 33,
"described": 33,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "tlk105lrhbt.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
"checked": "2026-10-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "tlk105lrhbt-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5.0,
5.0,
0.875
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "c90f1621d8ecb025ebd3a2467af1cf72d0f7496f4303c1569a9355c265058628",
"checked": "2026-10-11",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}