main
Ray
Publish 0.1.0
73f7338
TLK105LRHBT
Texas Instruments · Ethernet Transceivers · VQFN-32(5x5)
TLK105LRHBT from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RXD_3 / PHYAD4 | output | Receive data bit 3 for MII mode, synchronous to RX_CLK, multiplexed with PHY address bit PHYAD4 which is latched at power-up and hardware reset and is pulled down by default. |
| 2 | TX_CLK | output | MII transmit clock providing a 25 MHz or 2.5 MHz reference depending on speed; unused in RMII mode. |
| 3 | TX_EN | input | Transmit enable, presented on the rising edge of TX_CLK, indicating valid TXD data, active high; TXD[3:0] in MII mode and TXD[1:0] in RMII mode. |
| 4 | TXD_0 | input | Transmit data bit 0 from the MAC, synchronous to TX_CLK in MII mode or to the 50 MHz XI reference in RMII mode. |
| 5 | TXD_1 | input | Transmit data bit 1 from the MAC, synchronous to TX_CLK in MII mode or to the 50 MHz XI reference in RMII mode. |
| 6 | TXD_2 | input | Transmit data bit 2 from the MAC, used in MII mode, synchronous to TX_CLK. |
| 7 | TXD_3 | input | Transmit data bit 3 from the MAC, used in MII mode, synchronous to TX_CLK. |
| 8 | INT / PWDN | bidirectional | Default function is active-low power-down input; when set as interrupt it is an open-drain output with weak internal pull-up that may need an external pull-up, and register access is required to select the function. |
| 9 | RD- | bidirectional | Differential receive input (PMD input pair) automatically configured for 10Base-T or 100Base-TX, requires 3.3 V bias, and can be used as transmit output in Auto-MDIX mode. |
| 10 | RD+ | bidirectional | Differential receive input (PMD input pair) automatically configured for 10Base-T or 100Base-TX, requires 3.3 V bias, and can be used as transmit output in Auto-MDIX mode. |
| 11 | TD- | bidirectional | Differential transmit output (PMD output pair) automatically configured for 10Base-T or 100Base-TX, requires 3.3 V bias, and can be used as receive input in Auto-MDIX mode. |
| 12 | TD+ | bidirectional | Differential transmit output (PMD output pair) automatically configured for 10Base-T or 100Base-TX, requires 3.3 V bias, and can be used as receive input in Auto-MDIX mode. |
| 13 | PFBIN1 | input | Power feedback input fed from PFBOUT in single-supply operation, or connected to a 1.55 V external supply in multiple-supply operation with a 0.1 µF capacitor close to the pin. |
| 14 | AVDD33 | power_in | Analog 3.3 V power supply. |
| 15 | PFBOUT | output | Power feedback output with 10 µF and 0.1 µF ceramic capacitors placed close to it; connected to PFBIN1 and PFBIN2 in single-supply operation and not used in multiple-supply operation. |
| 16 | RBIAS | input | Bias resistor connection, using a 4.87 kΩ 1% resistor connected from RBIAS to GND. |
| 17 | LED_LINK (MLED) / AN_0 | output | LED pin indicating link status (Mode 1) or link with activity blink (Mode 2); AN_0 is also a power-up/reset strap that selects the advertised duplex mode. |
| 18 | RESET | input | Active-low reset input; asserting low for at least 1 µs reinitializes all internal registers and re-latches the jumper options. |
| 19 | MDIO | bidirectional | Management data I/O synchronized to MDC, which may be driven by the controller or the TLK10xL, and requires a 2.2 kΩ pull-up resistor. |
| 20 | MDC | input | Management data clock with a maximum rate of 25 MHz and no minimum rate, not required to be synchronous to TX_CLK or RX_CLK. |
| 21 | VDD_IO | power_in | Digital I/O supply of 3.3 V (3.0 to 3.6 V), 2.5 V (2.25 to 2.75 V), or 1.8 V (1.62 to 1.98 V, MII mode only). |
| 22 | XO | output | Crystal output for a 25 MHz crystal only; leave floating when an oscillator drives XI. |
| 23 | XI | input | Crystal or CMOS oscillator input: 25 MHz ±50 ppm in MII mode, or 50 MHz ±50 ppm CMOS oscillator in RMII mode, with the oscillator referenced to the VDD_IO voltage (RMII not supported with 1.8 V reference). |
| 24 | PFBIN2 | input | Power feedback input fed from PFBOUT in single-supply operation, or connected to a 1.55 V external supply in multiple-supply operation with a 0.1 µF capacitor close to the pin. |
| 25 | RX_CLK | output | MII receive clock providing 25 MHz or 2.5 MHz depending on speed, derived from the received data stream. |
| 26 | RX_DV / MII_MODE | output | Receive data valid indicating valid RXD data independent of carrier sense; also a power-up configuration strap for MII_MODE. |
| 27 | CRS / CRS_DV / LED_CFG | output | Carrier sense asserted when the MII receive medium is non-idle, or combined carrier sense and receive data valid in RMII mode; also the LED_CFG strap. |
| 28 | RX_ER / AMDIX_EN | output | Receive error indication synchronous to RX_CLK in MII mode or XI in RMII mode, not required by the MAC because the PHY corrupts data on receive error; also the AMDIX_EN strap. |
| 29 | COL (MLED) / PHYAD0 | output | Collision detect, always low in full duplex and not used in RMII mode; multiplexed with the PHYAD0 LSB address input (pulled up) and can carry the MLED output. |
| 30 | RXD_0 / PHYAD1 | output | Receive data bit 0 synchronous to RX_CLK, valid when RX_DV is asserted; multiplexed with PHY address bit PHYAD1 (pulled down). |
| 31 | RXD_1 / PHYAD2 | output | Receive data bit 1 synchronous to RX_CLK, valid when RX_DV is asserted (RMII uses RXD[1:0]); multiplexed with PHY address bit PHYAD2 (pulled down). |
| 32 | RXD_2 / PHYAD3 | output | Receive data bit 2 synchronous to RX_CLK, part of the MII RXD[3:0] nibble; multiplexed with PHY address bit PHYAD3 (pulled down). |
| 33 | GND | power_in | Ground exposed pad (DOWN_PAD); it must be soldered down to achieve the stated ESD rating on the Ethernet network pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | Interface |
| Pins | 33 |
CAD (KiCad official)
- Symbol:
TLK105LRHBT - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
tlk105lrhbt-etched.step/tlk105lrhbt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlk105lrhbt.step/tlk105lrhbt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (114 pp, sha256
83ab6da6f71b8024, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TLK105LRHBT
**Texas Instruments** · Ethernet Transceivers · VQFN-32(5x5)
TLK105LRHBT from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RXD_3 / PHYAD4 | output | Receive data bit 3 for MII mode, synchronous to RX_CLK, multiplexed with PHY address bit PHYAD4 which is latched at power-up and hardware reset and is pulled down by default. |
| 2 | TX_CLK | output | MII transmit clock providing a 25 MHz or 2.5 MHz reference depending on speed; unused in RMII mode. |
| 3 | TX_EN | input | Transmit enable, presented on the rising edge of TX_CLK, indicating valid TXD data, active high; TXD[3:0] in MII mode and TXD[1:0] in RMII mode. |
| 4 | TXD_0 | input | Transmit data bit 0 from the MAC, synchronous to TX_CLK in MII mode or to the 50 MHz XI reference in RMII mode. |
| 5 | TXD_1 | input | Transmit data bit 1 from the MAC, synchronous to TX_CLK in MII mode or to the 50 MHz XI reference in RMII mode. |
| 6 | TXD_2 | input | Transmit data bit 2 from the MAC, used in MII mode, synchronous to TX_CLK. |
| 7 | TXD_3 | input | Transmit data bit 3 from the MAC, used in MII mode, synchronous to TX_CLK. |
| 8 | INT / PWDN | bidirectional | Default function is active-low power-down input; when set as interrupt it is an open-drain output with weak internal pull-up that may need an external pull-up, and register access is required to select the function. |
| 9 | RD- | bidirectional | Differential receive input (PMD input pair) automatically configured for 10Base-T or 100Base-TX, requires 3.3 V bias, and can be used as transmit output in Auto-MDIX mode. |
| 10 | RD+ | bidirectional | Differential receive input (PMD input pair) automatically configured for 10Base-T or 100Base-TX, requires 3.3 V bias, and can be used as transmit output in Auto-MDIX mode. |
| 11 | TD- | bidirectional | Differential transmit output (PMD output pair) automatically configured for 10Base-T or 100Base-TX, requires 3.3 V bias, and can be used as receive input in Auto-MDIX mode. |
| 12 | TD+ | bidirectional | Differential transmit output (PMD output pair) automatically configured for 10Base-T or 100Base-TX, requires 3.3 V bias, and can be used as receive input in Auto-MDIX mode. |
| 13 | PFBIN1 | input | Power feedback input fed from PFBOUT in single-supply operation, or connected to a 1.55 V external supply in multiple-supply operation with a 0.1 µF capacitor close to the pin. |
| 14 | AVDD33 | power_in | Analog 3.3 V power supply. |
| 15 | PFBOUT | output | Power feedback output with 10 µF and 0.1 µF ceramic capacitors placed close to it; connected to PFBIN1 and PFBIN2 in single-supply operation and not used in multiple-supply operation. |
| 16 | RBIAS | input | Bias resistor connection, using a 4.87 kΩ 1% resistor connected from RBIAS to GND. |
| 17 | LED_LINK (MLED) / AN_0 | output | LED pin indicating link status (Mode 1) or link with activity blink (Mode 2); AN_0 is also a power-up/reset strap that selects the advertised duplex mode. |
| 18 | RESET | input | Active-low reset input; asserting low for at least 1 µs reinitializes all internal registers and re-latches the jumper options. |
| 19 | MDIO | bidirectional | Management data I/O synchronized to MDC, which may be driven by the controller or the TLK10xL, and requires a 2.2 kΩ pull-up resistor. |
| 20 | MDC | input | Management data clock with a maximum rate of 25 MHz and no minimum rate, not required to be synchronous to TX_CLK or RX_CLK. |
| 21 | VDD_IO | power_in | Digital I/O supply of 3.3 V (3.0 to 3.6 V), 2.5 V (2.25 to 2.75 V), or 1.8 V (1.62 to 1.98 V, MII mode only). |
| 22 | XO | output | Crystal output for a 25 MHz crystal only; leave floating when an oscillator drives XI. |
| 23 | XI | input | Crystal or CMOS oscillator input: 25 MHz ±50 ppm in MII mode, or 50 MHz ±50 ppm CMOS oscillator in RMII mode, with the oscillator referenced to the VDD_IO voltage (RMII not supported with 1.8 V reference). |
| 24 | PFBIN2 | input | Power feedback input fed from PFBOUT in single-supply operation, or connected to a 1.55 V external supply in multiple-supply operation with a 0.1 µF capacitor close to the pin. |
| 25 | RX_CLK | output | MII receive clock providing 25 MHz or 2.5 MHz depending on speed, derived from the received data stream. |
| 26 | RX_DV / MII_MODE | output | Receive data valid indicating valid RXD data independent of carrier sense; also a power-up configuration strap for MII_MODE. |
| 27 | CRS / CRS_DV / LED_CFG | output | Carrier sense asserted when the MII receive medium is non-idle, or combined carrier sense and receive data valid in RMII mode; also the LED_CFG strap. |
| 28 | RX_ER / AMDIX_EN | output | Receive error indication synchronous to RX_CLK in MII mode or XI in RMII mode, not required by the MAC because the PHY corrupts data on receive error; also the AMDIX_EN strap. |
| 29 | COL (MLED) / PHYAD0 | output | Collision detect, always low in full duplex and not used in RMII mode; multiplexed with the PHYAD0 LSB address input (pulled up) and can carry the MLED output. |
| 30 | RXD_0 / PHYAD1 | output | Receive data bit 0 synchronous to RX_CLK, valid when RX_DV is asserted; multiplexed with PHY address bit PHYAD1 (pulled down). |
| 31 | RXD_1 / PHYAD2 | output | Receive data bit 1 synchronous to RX_CLK, valid when RX_DV is asserted (RMII uses RXD[1:0]); multiplexed with PHY address bit PHYAD2 (pulled down). |
| 32 | RXD_2 / PHYAD3 | output | Receive data bit 2 synchronous to RX_CLK, part of the MII RXD[3:0] nibble; multiplexed with PHY address bit PHYAD3 (pulled down). |
| 33 | GND | power_in | Ground exposed pad (DOWN_PAD); it must be soldered down to achieve the stated ESD rating on the Ethernet network pins. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | Interface |
| Pins | 33 |
## CAD (KiCad official)
- Symbol: `TLK105LRHBT`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files: `tlk105lrhbt-etched.step` / `tlk105lrhbt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlk105lrhbt.step` / `tlk105lrhbt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlk105l) (114 pp, sha256 `83ab6da6f71b8024`, retrieved 2026-10-11, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tlk105lrhbt-datasheet.pdf)