main
Ray
Publish 0.1.0
eb90faf
TLIN1029MDRBRQ1
Texas Instruments · LIN Transceivers · HVSON-8-EP(3x3)
TLIN1029MDRBRQ1 from Texas Instruments, in a HVSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RXD | output | Open-drain RXD output reports the LIN bus state and needs an external pull-up of 1 kΩ to 10 kΩ if the MCU has no internal pull-up. |
| 2 | EN | input | Enable input: high selects normal operation and low selects sleep mode, with VIL max 0.8 V, VIH min 2 V, and an internal pull-down of 125 kΩ to 800 kΩ. |
| 3 | NC | unconnected | Not connected. |
| 4 | TXD | input | TXD input controls the LIN output state, where low drives the bus dominant, and it is internally pulled to ground through 125 kΩ to 800 kΩ with VIH min 2 V and VIL max 0.8 V. |
| 5 | GND | power_in | Device ground connection. |
| 6 | LIN | bidirectional | High-voltage LIN bus single-wire transmitter and receiver that survives transients up to 45 V, with an absolute bus input voltage range of -45 V to 45 V. |
| 7 | VSUP | power_in | Device supply voltage of 4 V to 36 V, connected to the battery through an external reverse-blocking diode. |
| 8 | NC | unconnected | Not connected. |
| 9 | Thermal Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSON-8-EP(3x3) |
| Category | Interface |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VSUP | -0.3 | 45 | V | 5 | ||
| LIN bus input voltage | VLIN | -45 | 45 | V | 5 | ||
| Logic pin voltage (RXD, TXD, EN) | VLOGIC | -0.3 | 6 | V | 5 | ||
| Ambient temperature range | TA | -40 | 125 | °C | 5 | ||
| Junction temperature range | TJ | -55 | 150 | °C | 5 | ||
| Supply voltage | VSUP | 4 | 36 | V | 6 | ||
| LIN Bus input voltage | VLIN | 0 | 36 | V | 6 | ||
| Logic Pin Voltage (RXD, TXD, EN) | VLOGIC | 0 | 5.25 | V | 6 | ||
| Operational supply voltage (ISO/DIS 17987 Param 10) | VSUP | 4 | 36 | V | Device is operational beyond the LIN defined nominal supply voltage range. See Figure 8-1 and Figure 8-2 | 6 | |
| Nominal supply voltage (ISO/DIS 17987 Param 10) | VSUP | 4 | 36 | V | Normal and Standby Modes: ramp VSUP while LIN signal is a 10 kHz square wave with 50 % duty cycle and 18V swing. See Figure 8-1 and Figure 8-2 | 6 | |
| Supply voltage in Sleep Mode | VSUP | 4 | 36 | V | Sleep Mode | 6 | |
| Under voltage VSUP threshold | UVSUP | 2.9 | 3.85 | V | Min is falling edge and Max is rising edge | 6 | |
| Supply current, normal mode, bus dominant | ISUP | 1 | 5 | mA | Normal Mode: EN = high, bus dominant: total bus load where RLIN > 500 Ω and CLIN < 10 nF (See Figure 8-7) | 6 | |
| Supply current, standby mode, bus dominant | ISUP | 1 | 2.1 | mA | Standby Mode: EN = low, bus dominant: total bus load where RLIN > 500 Ω and CLIN < 10 nF (See Figure 8-7) | 6 | |
| Supply current, normal mode, bus recessive | ISUP | 300 | 650 | µA | Normal Mode: EN = high, bus recessive (LIN = VSUP) | 6 | |
| Supply current, standby mode, bus recessive | ISUP | 10 | 30 | µA | Standby Mode: EN = low, bus recessive (LIN = VSUP) | 6 | |
| Supply current, sleep mode (4 V to 14 V) | ISUP | 8 | 12 | µA | Sleep Mode: 4.0 V < VSUP ≤ 14 V, LIN = VSUP, EN = 0 V, TXD and RXD floating | 6 | |
| Supply current, sleep mode (14 V to 36 V) | ISUP | 20 | µA | Sleep Mode: 14 V < VSUP ≤ 36 V, LIN = VSUP, EN = 0 V, TXD and RXD floating | 6 | ||
| Output low voltage (RXD) | VOL | 0.6 | V | RPU = 2.4 kΩ | 6 | ||
| Low level output current, open drain | IOL | 1.5 | mA | LIN = 0 V, RXD = 0.4 V | 6 | ||
| Leakage current, high-level (RXD) | IILG | -5 | 0 | 5 | µA | LIN = VSUP, RXD = 5 V | 6 |
| Low level input voltage (TXD) | VIL | -0.3 | 0.8 | V | 6 | ||
| High level input voltage (TXD) | VIH | 2 | 5.5 | V | 6 | ||
| Low level input leakage current (TXD) | IILG | -5 | 0 | 5 | µA | TXD = low | 6 |
| Internal pull-down resistor value (TXD) | RTXD | 125 | 350 | 800 | kΩ | 6 | |
| HIGH level output voltage (LIN) | VOH | 0.85 | V | LIN recessive, TXD = high, IO = 0 mA, VSUP = 7 V to 36 V | 7 | ||
| HIGH level output voltage (LIN), low supply | VOH | 3 | V | LIN recessive, TXD = high, IO = 0 mA, VSUP = 4 V ≤ VSUP < 7 V | 7 | ||
| LOW level output voltage (LIN) | VOL | 0.2 | V | LIN dominant, TXD = low, VSUP = 7 V to 36 V | 7 | ||
| LOW level output voltage (LIN), low supply | VOL | 1.2 | V | LIN dominant, TXD = low, VSUP = 4 V ≤ VSUP < 7 V | 7 | ||
| VSUP where impact of recessive LIN bus < 5% (ISO/DIS 17987 Param 11) | VSUP_NON_OP | -0.3 | 45 | V | TXD & RXD open LIN = 4 V to 45 V | 7 | |
| Limiting current (ISO/DIS 17987 Param 12) | IBUS_LIM | 40 | 90 | 200 | mA | TXD = 0 V, VLIN = 18 V, RMEAS = 440 Ω, VSUP = 18 V, VBUSdom < 4.518 V | 7 |
| Receiver leakage current, dominant (ISO/DIS 17987 Param 13) | IBUS_PAS_dom | -1 | mA | LIN = 0 V, VSUP = 12 V Driver off/recessive Figure 8-7 | 7 | ||
| Receiver leakage current, recessive (ISO/DIS 17987 Param 14) | IBUS_PAS_rec1 | 20 | µA | LIN > VSUP, 4 V ≤ VSUP ≤ 36 V Driver off; Figure 8-8 | 7 | ||
| Receiver leakage current, recessive (ISO/DIS 17987 Param 14) | IBUS_PAS_rec2 | -5 | 5 | µA | LIN = VSUP, Driver off; Figure 8-8 | 7 | |
| Leakage current, loss of ground (ISO/DIS 17987 Param 15) | IBUS_NO_GND | -1 | 1 | mA | GND = VSUP, VSUP = 18 V, LIN = 0 V; Figure 8-9 | 7 | |
| Leakage current, loss of supply (ISO/DIS 17987 Param 16) | IBUS_NO_BAT | 5 | µA | LIN = 18 V, VSUP = GND; Figure 8-10 | 7 | ||
| Low level input voltage, LIN (ISO/DIS 17987 Param 17) | VBUSdom | 0.4 | V | LIN dominant (including LIN dominant for wake up) See Figure 8-4, Figure 8-3 | 7 | ||
| High level input voltage, LIN (ISO/DIS 17987 Param 18) | VBUSrec | 0.6 | V | LIN recessive See Figure 8-4, Figure 8-3 | 7 | ||
| Receiver center threshold (ISO/DIS 17987 Param 19) | VBUS_CNT | 0.475 | 0.5 | 0.525 | VSUP | VBUS_CNT = (VIL + VIH)/2 See Figure 8-4, Figure 8-3 | 7 |
| Hysteresis voltage (ISO/DIS 17987 Param 20) | VHYS | 0.175 | VSUP | VHYS = (VIL - VIH) See Figure 8-4, Figure 8-3 | 7 | ||
| Serial diode LIN term pull-up path | VSERIAL_DIODE | 0.4 | 0.7 | 1 | V | By design and characterization | 7 |
| Internal pull-up resistor to VSUP | RPU-LIN | 20 | 45 | 60 | kΩ | Normal and standby modes | 7 |
| Pull-up current source to VSUP | IRSLEEP | -20 | -2 | µA | Sleep mode, VSUP = 14 V, LIN = GND | 7 | |
| Capacitance of the LIN pin | CLINPIN | 25 | pF | VSUP = 14 V | 7 | ||
| Low level input voltage (EN) | VIL | -0.3 | 0.8 | V | 7 | ||
| High level input voltage (EN) | VIH | 2 | 5.5 | V | 7 | ||
| Hysteresis voltage (EN) | VIT | 50 | 500 | mV | By design and characterization | 7 | |
| Low level input current (EN) | IILG | -5 | 0 | 5 | µA | EN = low | 7 |
| Internal pull-down resistor (EN) | REN | 125 | 350 | 800 | kΩ | 7 | |
| Dominant state time out | tDST | 20 | 45 | 80 | ms | 9 | |
| LIN wakeup time (Minimum dominant time on LIN bus for wakeup) | tLINBUS | 25 | 65 | 150 | µs | See Figure 8-17, Figure 9-2, and Figure 9-3 | 9 |
| Time to clear false wakeup prevention logic (recessive time on LIN bus to clear bus stuck dominant fault) | tCLEAR | 8 | 25 | 50 | µs | See Figure 9-3 | 9 |
| Symmetry of receiver propagation delay time | trx_sym | -2 | 2 | µs | Rising edge with respect to falling edge, (trx_sym = trx_pdf, trx_pdr), RRXD = 2.4 kΩ, CRXD = 20 pF | 9 | |
| Junction-to-ambient thermal resistance (DRB VSON 8-pin) | RΘJA | 48.5 | °C/W | DRB (VSON) 8-PINS | 5 | ||
| Junction-to-case (top) thermal resistance (DRB VSON 8-pin) | RΘJC(top) | 55.5 | °C/W | DRB (VSON) 8-PINS | 5 | ||
| Junction-to-board thermal resistance (DRB VSON 8-pin) | RΘJB | 22.2 | °C/W | DRB (VSON) 8-PINS | 5 | ||
| Junction-to-case (bottom) thermal resistance (DRB VSON 8-pin) | RΘJC(bot) | 4.8 | °C/W | DRB (VSON) 8-PINS | 5 |
CAD (KiCad official)
- Symbol:
TLIN1029MDRBRQ1 - Footprint:
Package_SON:HVSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm - 3D model: HVSON-8-EP(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tlin1029mdrbrq1-etched.step/tlin1029mdrbrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlin1029mdrbrq1.step/tlin1029mdrbrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (51 pp, sha256
bffb430ff949c46f, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TLIN1029MDRBRQ1
**Texas Instruments** · LIN Transceivers · HVSON-8-EP(3x3)
TLIN1029MDRBRQ1 from Texas Instruments, in a HVSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RXD | output | Open-drain RXD output reports the LIN bus state and needs an external pull-up of 1 kΩ to 10 kΩ if the MCU has no internal pull-up. |
| 2 | EN | input | Enable input: high selects normal operation and low selects sleep mode, with VIL max 0.8 V, VIH min 2 V, and an internal pull-down of 125 kΩ to 800 kΩ. |
| 3 | NC | unconnected | Not connected. |
| 4 | TXD | input | TXD input controls the LIN output state, where low drives the bus dominant, and it is internally pulled to ground through 125 kΩ to 800 kΩ with VIH min 2 V and VIL max 0.8 V. |
| 5 | GND | power_in | Device ground connection. |
| 6 | LIN | bidirectional | High-voltage LIN bus single-wire transmitter and receiver that survives transients up to 45 V, with an absolute bus input voltage range of -45 V to 45 V. |
| 7 | VSUP | power_in | Device supply voltage of 4 V to 36 V, connected to the battery through an external reverse-blocking diode. |
| 8 | NC | unconnected | Not connected. |
| 9 | Thermal Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSON-8-EP(3x3) |
| Category | Interface |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VSUP | -0.3 | | 45 | V | | 5 |
| LIN bus input voltage | VLIN | -45 | | 45 | V | | 5 |
| Logic pin voltage (RXD, TXD, EN) | VLOGIC | -0.3 | | 6 | V | | 5 |
| Ambient temperature range | TA | -40 | | 125 | °C | | 5 |
| Junction temperature range | TJ | -55 | | 150 | °C | | 5 |
| Supply voltage | VSUP | 4 | | 36 | V | | 6 |
| LIN Bus input voltage | VLIN | 0 | | 36 | V | | 6 |
| Logic Pin Voltage (RXD, TXD, EN) | VLOGIC | 0 | | 5.25 | V | | 6 |
| Operational supply voltage (ISO/DIS 17987 Param 10) | VSUP | 4 | | 36 | V | Device is operational beyond the LIN defined nominal supply voltage range. See Figure 8-1 and Figure 8-2 | 6 |
| Nominal supply voltage (ISO/DIS 17987 Param 10) | VSUP | 4 | | 36 | V | Normal and Standby Modes: ramp VSUP while LIN signal is a 10 kHz square wave with 50 % duty cycle and 18V swing. See Figure 8-1 and Figure 8-2 | 6 |
| Supply voltage in Sleep Mode | VSUP | 4 | | 36 | V | Sleep Mode | 6 |
| Under voltage VSUP threshold | UVSUP | 2.9 | | 3.85 | V | Min is falling edge and Max is rising edge | 6 |
| Supply current, normal mode, bus dominant | ISUP | | 1 | 5 | mA | Normal Mode: EN = high, bus dominant: total bus load where RLIN > 500 Ω and CLIN < 10 nF (See Figure 8-7) | 6 |
| Supply current, standby mode, bus dominant | ISUP | | 1 | 2.1 | mA | Standby Mode: EN = low, bus dominant: total bus load where RLIN > 500 Ω and CLIN < 10 nF (See Figure 8-7) | 6 |
| Supply current, normal mode, bus recessive | ISUP | | 300 | 650 | µA | Normal Mode: EN = high, bus recessive (LIN = VSUP) | 6 |
| Supply current, standby mode, bus recessive | ISUP | | 10 | 30 | µA | Standby Mode: EN = low, bus recessive (LIN = VSUP) | 6 |
| Supply current, sleep mode (4 V to 14 V) | ISUP | | 8 | 12 | µA | Sleep Mode: 4.0 V < VSUP ≤ 14 V, LIN = VSUP, EN = 0 V, TXD and RXD floating | 6 |
| Supply current, sleep mode (14 V to 36 V) | ISUP | | | 20 | µA | Sleep Mode: 14 V < VSUP ≤ 36 V, LIN = VSUP, EN = 0 V, TXD and RXD floating | 6 |
| Output low voltage (RXD) | VOL | | | 0.6 | V | RPU = 2.4 kΩ | 6 |
| Low level output current, open drain | IOL | 1.5 | | | mA | LIN = 0 V, RXD = 0.4 V | 6 |
| Leakage current, high-level (RXD) | IILG | -5 | 0 | 5 | µA | LIN = VSUP, RXD = 5 V | 6 |
| Low level input voltage (TXD) | VIL | -0.3 | | 0.8 | V | | 6 |
| High level input voltage (TXD) | VIH | 2 | | 5.5 | V | | 6 |
| Low level input leakage current (TXD) | IILG | -5 | 0 | 5 | µA | TXD = low | 6 |
| Internal pull-down resistor value (TXD) | RTXD | 125 | 350 | 800 | kΩ | | 6 |
| HIGH level output voltage (LIN) | VOH | 0.85 | | | V | LIN recessive, TXD = high, IO = 0 mA, VSUP = 7 V to 36 V | 7 |
| HIGH level output voltage (LIN), low supply | VOH | 3 | | | V | LIN recessive, TXD = high, IO = 0 mA, VSUP = 4 V ≤ VSUP < 7 V | 7 |
| LOW level output voltage (LIN) | VOL | | | 0.2 | V | LIN dominant, TXD = low, VSUP = 7 V to 36 V | 7 |
| LOW level output voltage (LIN), low supply | VOL | | | 1.2 | V | LIN dominant, TXD = low, VSUP = 4 V ≤ VSUP < 7 V | 7 |
| VSUP where impact of recessive LIN bus < 5% (ISO/DIS 17987 Param 11) | VSUP_NON_OP | -0.3 | | 45 | V | TXD & RXD open LIN = 4 V to 45 V | 7 |
| Limiting current (ISO/DIS 17987 Param 12) | IBUS_LIM | 40 | 90 | 200 | mA | TXD = 0 V, VLIN = 18 V, RMEAS = 440 Ω, VSUP = 18 V, VBUSdom < 4.518 V | 7 |
| Receiver leakage current, dominant (ISO/DIS 17987 Param 13) | IBUS_PAS_dom | -1 | | | mA | LIN = 0 V, VSUP = 12 V Driver off/recessive Figure 8-7 | 7 |
| Receiver leakage current, recessive (ISO/DIS 17987 Param 14) | IBUS_PAS_rec1 | | | 20 | µA | LIN > VSUP, 4 V ≤ VSUP ≤ 36 V Driver off; Figure 8-8 | 7 |
| Receiver leakage current, recessive (ISO/DIS 17987 Param 14) | IBUS_PAS_rec2 | -5 | | 5 | µA | LIN = VSUP, Driver off; Figure 8-8 | 7 |
| Leakage current, loss of ground (ISO/DIS 17987 Param 15) | IBUS_NO_GND | -1 | | 1 | mA | GND = VSUP, VSUP = 18 V, LIN = 0 V; Figure 8-9 | 7 |
| Leakage current, loss of supply (ISO/DIS 17987 Param 16) | IBUS_NO_BAT | | | 5 | µA | LIN = 18 V, VSUP = GND; Figure 8-10 | 7 |
| Low level input voltage, LIN (ISO/DIS 17987 Param 17) | VBUSdom | | | 0.4 | V | LIN dominant (including LIN dominant for wake up) See Figure 8-4, Figure 8-3 | 7 |
| High level input voltage, LIN (ISO/DIS 17987 Param 18) | VBUSrec | 0.6 | | | V | LIN recessive See Figure 8-4, Figure 8-3 | 7 |
| Receiver center threshold (ISO/DIS 17987 Param 19) | VBUS_CNT | 0.475 | 0.5 | 0.525 | VSUP | VBUS_CNT = (VIL + VIH)/2 See Figure 8-4, Figure 8-3 | 7 |
| Hysteresis voltage (ISO/DIS 17987 Param 20) | VHYS | 0.175 | | | VSUP | VHYS = (VIL - VIH) See Figure 8-4, Figure 8-3 | 7 |
| Serial diode LIN term pull-up path | VSERIAL_DIODE | 0.4 | 0.7 | 1 | V | By design and characterization | 7 |
| Internal pull-up resistor to VSUP | RPU-LIN | 20 | 45 | 60 | kΩ | Normal and standby modes | 7 |
| Pull-up current source to VSUP | IRSLEEP | -20 | | -2 | µA | Sleep mode, VSUP = 14 V, LIN = GND | 7 |
| Capacitance of the LIN pin | CLINPIN | | | 25 | pF | VSUP = 14 V | 7 |
| Low level input voltage (EN) | VIL | -0.3 | | 0.8 | V | | 7 |
| High level input voltage (EN) | VIH | 2 | | 5.5 | V | | 7 |
| Hysteresis voltage (EN) | VIT | 50 | | 500 | mV | By design and characterization | 7 |
| Low level input current (EN) | IILG | -5 | 0 | 5 | µA | EN = low | 7 |
| Internal pull-down resistor (EN) | REN | 125 | 350 | 800 | kΩ | | 7 |
| Dominant state time out | tDST | 20 | 45 | 80 | ms | | 9 |
| LIN wakeup time (Minimum dominant time on LIN bus for wakeup) | tLINBUS | 25 | 65 | 150 | µs | See Figure 8-17, Figure 9-2, and Figure 9-3 | 9 |
| Time to clear false wakeup prevention logic (recessive time on LIN bus to clear bus stuck dominant fault) | tCLEAR | 8 | 25 | 50 | µs | See Figure 9-3 | 9 |
| Symmetry of receiver propagation delay time | trx_sym | -2 | | 2 | µs | Rising edge with respect to falling edge, (trx_sym = trx_pdf, trx_pdr), RRXD = 2.4 kΩ, CRXD = 20 pF | 9 |
| Junction-to-ambient thermal resistance (DRB VSON 8-pin) | RΘJA | | 48.5 | | °C/W | DRB (VSON) 8-PINS | 5 |
| Junction-to-case (top) thermal resistance (DRB VSON 8-pin) | RΘJC(top) | | 55.5 | | °C/W | DRB (VSON) 8-PINS | 5 |
| Junction-to-board thermal resistance (DRB VSON 8-pin) | RΘJB | | 22.2 | | °C/W | DRB (VSON) 8-PINS | 5 |
| Junction-to-case (bottom) thermal resistance (DRB VSON 8-pin) | RΘJC(bot) | | 4.8 | | °C/W | DRB (VSON) 8-PINS | 5 |
## CAD (KiCad official)
- Symbol: `TLIN1029MDRBRQ1`
- Footprint: `Package_SON:HVSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm`
- 3D model: HVSON-8-EP(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tlin1029mdrbrq1-etched.step` / `tlin1029mdrbrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlin1029mdrbrq1.step` / `tlin1029mdrbrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tlin1029-q1.pdf) (51 pp, sha256 `bffb430ff949c46f`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tlin1029mdrbrq1-datasheet.pdf)