Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLIN1029MDRBRQ1

Texas Instruments · LIN Transceivers · HVSON-8-EP(3x3)

TLIN1029MDRBRQ1 from Texas Instruments, in a HVSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RXD output Open-drain RXD output reports the LIN bus state and needs an external pull-up of 1 kΩ to 10 kΩ if the MCU has no internal pull-up.
2 EN input Enable input: high selects normal operation and low selects sleep mode, with VIL max 0.8 V, VIH min 2 V, and an internal pull-down of 125 kΩ to 800 kΩ.
3 NC unconnected Not connected.
4 TXD input TXD input controls the LIN output state, where low drives the bus dominant, and it is internally pulled to ground through 125 kΩ to 800 kΩ with VIH min 2 V and VIL max 0.8 V.
5 GND power_in Device ground connection.
6 LIN bidirectional High-voltage LIN bus single-wire transmitter and receiver that survives transients up to 45 V, with an absolute bus input voltage range of -45 V to 45 V.
7 VSUP power_in Device supply voltage of 4 V to 36 V, connected to the battery through an external reverse-blocking diode.
8 NC unconnected Not connected.
9 Thermal Pad passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HVSON-8-EP(3x3)
Category Interface
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VSUP -0.3 45 V 5
LIN bus input voltage VLIN -45 45 V 5
Logic pin voltage (RXD, TXD, EN) VLOGIC -0.3 6 V 5
Ambient temperature range TA -40 125 °C 5
Junction temperature range TJ -55 150 °C 5
Supply voltage VSUP 4 36 V 6
LIN Bus input voltage VLIN 0 36 V 6
Logic Pin Voltage (RXD, TXD, EN) VLOGIC 0 5.25 V 6
Operational supply voltage (ISO/DIS 17987 Param 10) VSUP 4 36 V Device is operational beyond the LIN defined nominal supply voltage range. See Figure 8-1 and Figure 8-2 6
Nominal supply voltage (ISO/DIS 17987 Param 10) VSUP 4 36 V Normal and Standby Modes: ramp VSUP while LIN signal is a 10 kHz square wave with 50 % duty cycle and 18V swing. See Figure 8-1 and Figure 8-2 6
Supply voltage in Sleep Mode VSUP 4 36 V Sleep Mode 6
Under voltage VSUP threshold UVSUP 2.9 3.85 V Min is falling edge and Max is rising edge 6
Supply current, normal mode, bus dominant ISUP 1 5 mA Normal Mode: EN = high, bus dominant: total bus load where RLIN > 500 Ω and CLIN < 10 nF (See Figure 8-7) 6
Supply current, standby mode, bus dominant ISUP 1 2.1 mA Standby Mode: EN = low, bus dominant: total bus load where RLIN > 500 Ω and CLIN < 10 nF (See Figure 8-7) 6
Supply current, normal mode, bus recessive ISUP 300 650 µA Normal Mode: EN = high, bus recessive (LIN = VSUP) 6
Supply current, standby mode, bus recessive ISUP 10 30 µA Standby Mode: EN = low, bus recessive (LIN = VSUP) 6
Supply current, sleep mode (4 V to 14 V) ISUP 8 12 µA Sleep Mode: 4.0 V < VSUP ≤ 14 V, LIN = VSUP, EN = 0 V, TXD and RXD floating 6
Supply current, sleep mode (14 V to 36 V) ISUP 20 µA Sleep Mode: 14 V < VSUP ≤ 36 V, LIN = VSUP, EN = 0 V, TXD and RXD floating 6
Output low voltage (RXD) VOL 0.6 V RPU = 2.4 kΩ 6
Low level output current, open drain IOL 1.5 mA LIN = 0 V, RXD = 0.4 V 6
Leakage current, high-level (RXD) IILG -5 0 5 µA LIN = VSUP, RXD = 5 V 6
Low level input voltage (TXD) VIL -0.3 0.8 V 6
High level input voltage (TXD) VIH 2 5.5 V 6
Low level input leakage current (TXD) IILG -5 0 5 µA TXD = low 6
Internal pull-down resistor value (TXD) RTXD 125 350 800 kΩ 6
HIGH level output voltage (LIN) VOH 0.85 V LIN recessive, TXD = high, IO = 0 mA, VSUP = 7 V to 36 V 7
HIGH level output voltage (LIN), low supply VOH 3 V LIN recessive, TXD = high, IO = 0 mA, VSUP = 4 V ≤ VSUP < 7 V 7
LOW level output voltage (LIN) VOL 0.2 V LIN dominant, TXD = low, VSUP = 7 V to 36 V 7
LOW level output voltage (LIN), low supply VOL 1.2 V LIN dominant, TXD = low, VSUP = 4 V ≤ VSUP < 7 V 7
VSUP where impact of recessive LIN bus < 5% (ISO/DIS 17987 Param 11) VSUP_NON_OP -0.3 45 V TXD & RXD open LIN = 4 V to 45 V 7
Limiting current (ISO/DIS 17987 Param 12) IBUS_LIM 40 90 200 mA TXD = 0 V, VLIN = 18 V, RMEAS = 440 Ω, VSUP = 18 V, VBUSdom < 4.518 V 7
Receiver leakage current, dominant (ISO/DIS 17987 Param 13) IBUS_PAS_dom -1 mA LIN = 0 V, VSUP = 12 V Driver off/recessive Figure 8-7 7
Receiver leakage current, recessive (ISO/DIS 17987 Param 14) IBUS_PAS_rec1 20 µA LIN > VSUP, 4 V ≤ VSUP ≤ 36 V Driver off; Figure 8-8 7
Receiver leakage current, recessive (ISO/DIS 17987 Param 14) IBUS_PAS_rec2 -5 5 µA LIN = VSUP, Driver off; Figure 8-8 7
Leakage current, loss of ground (ISO/DIS 17987 Param 15) IBUS_NO_GND -1 1 mA GND = VSUP, VSUP = 18 V, LIN = 0 V; Figure 8-9 7
Leakage current, loss of supply (ISO/DIS 17987 Param 16) IBUS_NO_BAT 5 µA LIN = 18 V, VSUP = GND; Figure 8-10 7
Low level input voltage, LIN (ISO/DIS 17987 Param 17) VBUSdom 0.4 V LIN dominant (including LIN dominant for wake up) See Figure 8-4, Figure 8-3 7
High level input voltage, LIN (ISO/DIS 17987 Param 18) VBUSrec 0.6 V LIN recessive See Figure 8-4, Figure 8-3 7
Receiver center threshold (ISO/DIS 17987 Param 19) VBUS_CNT 0.475 0.5 0.525 VSUP VBUS_CNT = (VIL + VIH)/2 See Figure 8-4, Figure 8-3 7
Hysteresis voltage (ISO/DIS 17987 Param 20) VHYS 0.175 VSUP VHYS = (VIL - VIH) See Figure 8-4, Figure 8-3 7
Serial diode LIN term pull-up path VSERIAL_DIODE 0.4 0.7 1 V By design and characterization 7
Internal pull-up resistor to VSUP RPU-LIN 20 45 60 kΩ Normal and standby modes 7
Pull-up current source to VSUP IRSLEEP -20 -2 µA Sleep mode, VSUP = 14 V, LIN = GND 7
Capacitance of the LIN pin CLINPIN 25 pF VSUP = 14 V 7
Low level input voltage (EN) VIL -0.3 0.8 V 7
High level input voltage (EN) VIH 2 5.5 V 7
Hysteresis voltage (EN) VIT 50 500 mV By design and characterization 7
Low level input current (EN) IILG -5 0 5 µA EN = low 7
Internal pull-down resistor (EN) REN 125 350 800 kΩ 7
Dominant state time out tDST 20 45 80 ms 9
LIN wakeup time (Minimum dominant time on LIN bus for wakeup) tLINBUS 25 65 150 µs See Figure 8-17, Figure 9-2, and Figure 9-3 9
Time to clear false wakeup prevention logic (recessive time on LIN bus to clear bus stuck dominant fault) tCLEAR 8 25 50 µs See Figure 9-3 9
Symmetry of receiver propagation delay time trx_sym -2 2 µs Rising edge with respect to falling edge, (trx_sym = trx_pdf, trx_pdr), RRXD = 2.4 kΩ, CRXD = 20 pF 9
Junction-to-ambient thermal resistance (DRB VSON 8-pin) RΘJA 48.5 °C/W DRB (VSON) 8-PINS 5
Junction-to-case (top) thermal resistance (DRB VSON 8-pin) RΘJC(top) 55.5 °C/W DRB (VSON) 8-PINS 5
Junction-to-board thermal resistance (DRB VSON 8-pin) RΘJB 22.2 °C/W DRB (VSON) 8-PINS 5
Junction-to-case (bottom) thermal resistance (DRB VSON 8-pin) RΘJC(bot) 4.8 °C/W DRB (VSON) 8-PINS 5

CAD (KiCad official)

  • Symbol: TLIN1029MDRBRQ1
  • Footprint: Package_SON:HVSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm
  • 3D model: HVSON-8-EP(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tlin1029mdrbrq1-etched.step / tlin1029mdrbrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlin1029mdrbrq1.step / tlin1029mdrbrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (51 pp, sha256 bffb430ff949c46f, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF