main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tlin1027drbrq1: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tlin1027drbrq1-etched.glb Publish 0.1.0 · Ray
tlin1027drbrq1-etched.step tlin1027drbrq1: factory component page (tier=lcsc) · Ray
tlin1027drbrq1-hero.glb tlin1027drbrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
tlin1027drbrq1-hero.overlay.json Publish 0.1.0 · Ray
tlin1027drbrq1.glb Publish 0.1.0 · Ray
tlin1027drbrq1.kicad_mod Publish 0.1.0 · Ray
tlin1027drbrq1.kicad_sym Publish 0.1.0 · Ray
tlin1027drbrq1.lbr Publish 0.1.0 · Ray
tlin1027drbrq1.step Publish 0.1.0 · Ray

TLIN1027DRBRQ1

Texas Instruments · LIN Transceivers · SON-8-EP(3x3)

TLIN1027DRBRQ1 from Texas Instruments, in a SON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RXD output Open-drain RXD output interface reporting the state of the LIN bus voltage.
2 EN input Enable input: high puts the device in normal operation mode and low puts the device in sleep mode.
3 NC unconnected Not connected.
4 TXD input TXD input interface controls the state of the LIN output and is internally pulled to ground.
5 GND power_in Ground.
6 LIN bidirectional LIN bus single-wire transmitter and receiver; the device supports a 4 V to 36 V supply range with ±45 V LIN bus fault protection.
7 VSUP power_in Device supply voltage, connected to the battery in series with an external reverse blocking diode; absolute maximum supply voltage is 45 V and the stated operating range is 4 V to 36 V.
8 NC unconnected Not connected.
9 Thermal Pad passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SON-8-EP(3x3)
Category Interface
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VSUP -0.3 45 V 4
LIN bus input voltage VLIN -45 45 V 4
Logic pin voltage (RXD, TXD, EN) VLOGIC -0.3 6 V 4
Ambient temperature range TA -40 125 °C 4
Junction temperature range TJ -55 150 °C 4
Supply voltage VSUP 4 36 V 5
LIN bus input voltage VLIN 0 36 V 5
Logic pin voltage (RXD, TXD, EN) VLOGIC 0 5.25 V 5
Under voltage VSUP threshold UVSUP 2.9 3.85 V Min is falling edge and Max is rising edge 5
Supply current, normal mode, bus dominant ISUP 5 mA EN = high, bus dominant: RLIN > 500 Ω, CLIN < 10 nF 5
Supply current, standby mode, bus dominant ISUP 1 2.1 mA EN = low, bus dominant: RLIN > 500 Ω, CLIN < 10 nF 5
Supply current, normal mode, bus recessive ISUP 300 650 µA EN = high, bus recessive (LIN = VSUP) 5
Supply current, standby mode, bus recessive ISUP 10 30 µA EN = low, bus recessive (LIN = VSUP) 5
Sleep mode supply current, 4.0 V < VSUP ≤ 14 V ISUP 8 12 µA Sleep Mode: 4.0 V < VSUP ≤ 14 V, LIN = VSUP, EN = 0 V, TXD and RXD floating 5
Sleep mode supply current, 14 V < VSUP ≤ 36 V ISUP 20 µA Sleep Mode: 14 V < VSUP ≤ 36 V, LIN = VSUP, EN = 0 V, TXD and RXD floating 5
Output low voltage VOL 0.6 V RPU = 2.4 kΩ 5
Low level output current, open drain IOL 1.5 mA LIN = 0 V, RXD = 0.4 V 6
Low level input voltage (TXD) VIL -0.3 0.8 V 6
High level input voltage (TXD) VIH 2 5.5 V 6
Low level input leakage current (TXD) IILG -5 0 5 µA TXD = low 6
Internal pull-down resistor value (TXD) RTXD 125 350 800 kΩ 6
HIGH level output voltage (LIN) VOH 0.85 VSUP LIN recessive, TXD = high, IO = 0 mA, VSUP = 7 V to 36 V 6
HIGH level output voltage (LIN) VOH 3 V LIN recessive, TXD = high, IO = 0 mA, VSUP = 4 V ≤ VSUP < 7 V 6
LOW level output voltage (LIN) VOL 0.2 VSUP LIN dominant, TXD = low, VSUP = 7 V to 36 V 6
LOW level output voltage (LIN) VOL 1.2 V LIN dominant, TXD = low, VSUP = 4 V ≤ VSUP < 7 V 6
VSUP where impact of recessive LIN bus < 5% (non-operating) VSUP_NON_OP -0.3 45 V TXD & RXD open, LIN = 4 V to 45 V 6
Limiting current IBUS_LIM 40 90 200 mA TXD = 0 V, VLIN = 18 V, RMEAS = 440 Ω, VSUP = 18 V, VBUSdom < 4.518 V 6
Receiver leakage current, dominant IBUS_PAS_dom -1 mA LIN = 0 V, VSUP = 12 V, driver off/recessive 6
Receiver leakage current, recessive (LIN = VSUP) IBUS_PAS_rec2 -5 5 µA LIN = VSUP, driver off 6
Leakage current, loss of ground IBUS_NO_GND -1 1 mA GND = VSUP, VSUP = 18 V, LIN = 0 V 6
Low level input voltage, LIN bus (dominant) VBUSdom 0.4 VSUP LIN dominant (including LIN dominant for wake up) 6
High level input voltage, LIN bus (recessive) VBUSrec 0.6 VSUP LIN recessive 6
Receiver center threshold VBUS_CNT 0.475 0.5 0.525 VSUP VBUS_CNT = (VIL + VIH)/2 6
Hysteresis voltage VHYS 0.175 VSUP VHYS = (VIL - VIH) 6
Internal pull-up resistor to VSUP RPU-LIN 20 45 60 kΩ Normal and standby modes 6
Pull-up current source to VSUP IRSLEEP -20 -2 µA Sleep mode, VSUP = 14 V, LIN = GND 6
Low level input voltage (EN) VIL -0.3 0.8 V 6
High level input voltage (EN) VIH 2 5.5 V 6
Low level input current (EN) IILG -5 0 5 µA EN = low 6
Internal pull-down resistor (EN) REN 125 205 800 kΩ 7
Duty Cycle 1 (ISO/DIS 17987 Param 27) D112V 0.396 THREC(MAX) = 0.744 x VSUP, THDOM(MAX) = 0.581 x VSUP, VSUP = 4 V to 7.4 V, tBIT = 50 µs (20 kbps) 8
Duty Cycle 2 (ISO/DIS 17987 Param 28) D212V 0.581 THREC(MIN) = 0.422 x VSUP, THDOM(MIN) = 0.284 x VSUP, VSUP = 4 V to 7.4 V, tBIT = 50 µs (20 kbps) 8
Duty Cycle 3 (ISO/DIS 17987 Param 29) D312V 0.417 THREC(MAX) = 0.778 x VSUP, THDOM(MAX) = 0.616 x VSUP, VSUP = 7 V to 18 V, tBIT = 96 µs (10.4 kbps) 8
Duty Cycle 3 D312V 0.417 THREC(MAX) = 0.645 x VSUP, THDOM(MAX) = 0.616 x VSUP, VSUP = 4 V to 7 V, tBIT = 96 µs (10.4 kbps) 8
Duty Cycle 4 (ISO/DIS 17987 Param 30) D412V 0.59 THREC(MIN) = 0.389 x VSUP, THDOM(MIN) = 0.251 x VSUP, VSUP = 4.6 V to 7.4 V, tBIT = 96 µs (10.4 kbps) 8
Receiver rising and falling propagation delay time trx_pdr, trx_pdf 6 µs RRXD = 2.4 kΩ, CRXD = 20 pF 9
Symmetry of receiver propagation delay time trx_sym -2 2 µs Rising edge with respect to falling edge, trx_sym = trx_pdf, trx_pdr, RRXD = 2.4 kΩ, CRXD = 20 pF 9
LIN wakeup time (minimum dominant time on LIN bus for wakeup) tLINBUS 25 65 150 µs See Fig 7-17, Fig 8-2, and Fig 8-3 9
Time to clear false wakeup prevention logic (recessive time to clear bus stuck dominant fault) tCLEAR 8 25 50 µs See Fig 8-3 9
Mode change delay time tMODE_CHANGE 2 15 µs Standby to normal or normal to sleep mode through EN pin (See Fig 7-15 and Fig 8-4) 9
Power up time tPWR 1.5 ms Upon power up, time for valid data on RXD 9
Junction-to-ambient thermal resistance (DRB) RΘJA 48.5 °C/W DRB (VSON) 8-pin package 4
Junction-to-case (top) thermal resistance (DRB) RΘJC(top) 55.5 °C/W DRB (VSON) 8-pin package 4
Junction-to-board thermal resistance (DRB) RΘJB 22.2 °C/W DRB (VSON) 8-pin package 4
Junction-to-top characterization parameter (DRB) ΨJT 1.2 °C/W DRB (VSON) 8-pin package 4
Junction-to-board characterization parameter (DRB) ΨJB 22.2 °C/W DRB (VSON) 8-pin package 4
Junction-to-case (bottom) thermal resistance (DRB) RΘJC(bot) 4.8 °C/W DRB (VSON) 8-pin package 5

CAD (KiCad official)

  • Symbol: TLIN1027DRBRQ1
  • Footprint: Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm
  • 3D model: SON-8-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: tlin1027drbrq1-etched.step / tlin1027drbrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlin1027drbrq1.step / tlin1027drbrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 fc2b405544eeb657, retrieved 2026-10-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF