Generated by kicad-footprint-generator · KiCad file format 20260206
TLE9855QXXUMA2
Infineon Technologies · Microcontroller Units (MCUs/MPUs/SOCs) · VQFN-48-EP(7x7)
TLE9855QXXUMA2 from Infineon Technologies, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GNDLIN | power_in | LIN transceiver ground pin. |
| 2 | HS | output | High Side Switch output, Hi-Z after reset; the overview specifies the switch as supplying at least 150 mA. |
| 3 | GH1 | output | Gate drive output for high-side FET 1. |
| 4 | SH1 | passive | Source connection of high-side FET 1. |
| 5 | GL1 | output | Gate drive output for low-side FET 1. |
| 6 | SL | passive | Source connection of the low-side FETs. |
| 7 | GL2 | output | Gate drive output for low-side FET 2. |
| 8 | SH2 | passive | Source connection of high-side FET 2. |
| 9 | GH2 | output | Gate drive output for high-side FET 2. |
| 10 | CP2L | passive | Charge pump capacity 2 low; connect external capacitor. |
| 11 | CP2H | passive | Charge pump capacity 2 high; connect external capacitor. |
| 12 | VCP | passive | Charge pump capacity pin; absolute voltage range for charge pump pins is -0.3 V to 48 V. |
| 13 | CP1L | passive | Charge pump capacity 1 low; connect external capacitor. |
| 14 | CP1H | passive | Charge pump capacity 1 high; connect external capacitor. |
| 15 | VSD | power_in | Battery supply input for the charge pump; absolute maximum 48 V. |
| 16 | VDH | power_in | Voltage drain supply of the high-side MOSFET driver; absolute range -2.8 V to 48 V. |
| 17 | MON1 | input | High voltage monitor input 1; absolute voltage range -28 V to 40 V. |
| 18 | MON2 | input | High voltage monitor input 2; absolute voltage range -28 V to 40 V. |
| 19 | MON3 | input | High voltage monitor input 3; absolute voltage range -28 V to 40 V. |
| 20 | MON4 | input | High voltage monitor input 4; absolute voltage range -28 V to 40 V. |
| 21 | GNDP | power_in | Core supply ground. |
| 22 | P0.1 | bidirectional | Port 0 general purpose I/O with pull-up enabled after reset; alternate functions per Table 6. |
| 23 | TMS/DAP1 | input | Test mode select input with internal pull-down (I/PD) after reset. |
| 24 | P0.0 | bidirectional | Port 0 I/O with pull-up after reset; main function SWD_CLK (Serial Wire Debug clock). |
| 25 | RESET | bidirectional | Bidirectional reset input/output with pull-up; not available during Sleep Mode. |
| 26 | P0.2 | bidirectional | Port 0 general purpose I/O with pull-down enabled after reset; alternate functions per Table 6. |
| 27 | P0.3 | bidirectional | Port 0 general purpose I/O with pull-up enabled after reset; alternate functions per Table 6. |
| 28 | P0.4 | bidirectional | Port 0 general purpose I/O with pull-up enabled after reset; alternate functions per Table 6. |
| 29 | P0.5 | bidirectional | Port 0 general purpose I/O with pull-up enabled after reset; alternate functions per Table 6. |
| 30 | GNDP | power_in | Core supply ground. |
| 31 | P1.0 | bidirectional | Port 1 general purpose I/O, input with pull-up and pull-down disabled after reset; alternate functions per Table 7. |
| 32 | P1.1 | bidirectional | Port 1 general purpose I/O, input with pull-up and pull-down disabled after reset; alternate functions per Table 7. |
| 33 | P1.2 | bidirectional | Port 1 general purpose I/O, input with pull-up and pull-down disabled after reset; alternate functions per Table 7. |
| 34 | P1.4 | bidirectional | Port 1 general purpose I/O, input with pull-up and pull-down disabled after reset; alternate functions per Table 7. |
| 35 | OP1 | input | Negative current sense amplifier input; input voltage range -7 V to 7 V. |
| 36 | OP2 | input | Positive current sense amplifier input; input voltage range -7 V to 7 V. |
| 37 | P2.7 | input | Port 2 input-only pin; ADC1 analog input channel 12 (AN7). |
| 38 | P2.3 | input | Port 2 input-only pin; ADC1 analog input channel 9 (AN3). |
| 39 | P2.1 | input | Port 2 input-only pin; ADC1 analog input channel 7 (AN1). |
| 40 | P2.2 | input | Port 2 input-only pin; ADC1 analog input channel 8 (AN2). |
| 41 | P2.0 | input | Port 2 input-only pin; ADC1 analog input channel 6 (AN0). |
| 42 | VDDC | power_out | Core supply of 1.5 V in Active Mode and 0.9 V in Stop Mode; do not connect external loads, buffer/bypass capacitor only (absolute maximum 1.6 V). |
| 43 | GNDA | power_in | Analog supply ground. |
| 44 | VDDP | power_out | I/O port supply of 5.0 V; do not connect external loads, buffer/bypass capacitors only (absolute maximum 5.5 V). |
| 45 | VDDEXT | power_out | External voltage supply output of 5.0 V at 40 mA. |
| 46 | VS | power_in | Battery supply input; single supply range 5.5 V to 28 V (extended 3 V to 28 V), absolute maximum 40 V load dump. |
| 47 | VBAT_SENSE | input | Battery supply voltage sense input; absolute voltage range -28 V to 40 V. |
| 48 | LIN | bidirectional | LIN bus interface input/output with pull-up after reset; absolute voltage range -28 V to 40 V. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | VQFN-48-EP(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VS voltage | VS,max | -0.3 | 40 | V | Load dump | 94 | |
| VSD voltage | VSD,max | -0.3 | 48 | V | 94 | ||
| VSD voltage (extended) | VSD,max_extended | -2.8 | 48 | V | Series resistor RVSD=2.2Ω; t=8ms | 94 | |
| VDDP voltage | VDDP,max | -0.3 | 5.5 | V | 94 | ||
| VDDEXT voltage | VDDEXT,max | -0.3 | V | 94 | |||
| VDDC voltage | VDDC,max | -0.3 | 1.6 | V | 94 | ||
| Voltage at VBAT_SENSE pin | VBAT_SENSE,max | -28 | 40 | V | 94 | ||
| Voltage at HS pin | VHS,max | -0.3 | V | 94 | |||
| Voltage at LIN pin | VLIN,max | -28 | 40 | V | 94 | ||
| Voltage at MONx pins | VMON,max | -28 | 40 | V | 94 | ||
| Voltage at VDH pin | VVDH,max | -2.8 | 48 | V | 94 | ||
| Voltage at GHx pins | VGH | -8 | 48 | V | 94 | ||
| Voltage at SHx pins | VSH | -8 | 48 | V | 94 | ||
| Voltage at GLx pins | VGL | -8 | 48 | V | 94 | ||
| Voltage at SL pin | VSL | -8 | 48 | V | 95 | ||
| Voltage at charge pump pins CP1H, CP1L, CP2H, CP2L | VCPx | -0.3 | 48 | V | 95 | ||
| Injection current in Sleep Mode on P0.x, P1.x, P2.x, TMS and RESET | Ixx | 5 | mA | Maximum allowed injection current on single pin or sum of pins in Sleep Mode and unpowered device | 96 | ||
| Injection current on HS | IHS | 150 | mA | Current flowing into HS pin (back supply in case of short to battery) | 96 | ||
| Max. current at VCP pin | IVCP | -15 | mA | 96 | |||
| Junction Temperature | Tj | -40 | 150 | °C | 96 | ||
| Storage Temperature | Tstg | -55 | 150 | °C | 96 | ||
| ESD Susceptibility HBM all pins | VESD1 | -2 | 2 | kV | JEDEC HBM | 96 | |
| Supply voltage in Active Mode | VS_AM | 5.5 | 28 | V | 97 | ||
| Extended Supply voltage in Active Mode-range 1 | VS_AM_extend_1 | 28 | 40 | V | Functional with parameter deviation | 97 | |
| Extended Supply voltage in Active Mode | VS_AM_extend_2 | 3 | 28 | V | Functional with parameter deviation | 97 | |
| Supply voltage in Active Mode for MOSFET Driver Supply | VSD_AM | 5.4 | 29 | V | 97 | ||
| Extended maximum supply voltage in Active Mode for MOSFET Driver Supply | VSD_AM_max_extended | 29 | 32 | V | Functional with parameter deviation; tmax < 400 ms | 98 | |
| Supply voltage for LIN Transceiver | VS_AM_LIN | 5.5 | 18 | V | Parameter Specification | 98 | |
| Extended Supply voltage for LIN Transceiver and Monitoring Inputs (MONx) for all device modes | VS_AM_LIN_extend | 4 | 28 | V | Functional with parameter deviation | 98 | |
| Supply voltage in Stop Mode | VS_Stopmin | 3 | V | 98 | |||
| Min. Supply voltage in Sleep Mode | VS_Sleepmin | 3 | V | 98 | |||
| Supply Voltage transients slew rate | dVS/dt | -5 | 5 | V/µs | 98 | ||
| Output current on any GPIO | IOH, IOL | -5 | 5 | mA | 98 | ||
| Output sum current for all GPIO pins | IGPIO,sum | -50 | 50 | mA | 98 | ||
| Current Consumption in Active Mode at pin VS | I_Vs_40M | 30 | mA | All digital modules enabled, ADCs in sequencer mode, VDDEXT off, Charge Pump on, MOSFET Driver on (PWM 25kHz, CLoad 10 nF), CSA enabled; 3V≤Vs≤28V; fsys=40MHz | 99 | ||
| Current consumption in Active Mode at pin VSD | I_VSD | 50 | mA | Charge Pump on, MOSFET Driver enabled and on (PWM 25kHz, CLoad 10 nF) | 99 | ||
| Current consumption in Active Mode at pin VSD - Brake Mode | I_VSD_BK | 25 | mA | Charge Pump on, single-stage mode, MOSFET Driver enabled, 2 Low-Side Drivers on but not switching; ICHARGE=15D | 99 | ||
| Current consumption in Sleep Mode at pin VSD - Hold Mode | IVSD_SMHM | 16 | µA | Device in Sleep mode, Low Side Gates held statically on; -40°C≤Tj≤85°C | 100 | ||
| Current consumption in Sleep Mode at pin VS | ISleep | 25 | µA | System in Sleep Mode, microcontroller not powered, wake via LIN and MON; -40°C≤Tj≤25°C | 101 | ||
| Current consumption in Sleep Mode at pin VS (extended Temperature Range) | ISleep(T_extend) | 35 | µA | 25°C<Tj≤85°C; 3V≤Vs≤18V | 101 | ||
| Current consumption in Sleep Mode at pin VS (extended Voltage and Temperature Range) | ISleep(V_T_extend) | 40 | µA | 25°C<Tj≤85°C; 3V≤Vs≤28V | 101 | ||
| Current consumption in Sleep Mode at pin VS with cyclic wake | ICyclic | 30 | µA | During sleep period; -40°C≤Tj≤25°C; 3V≤Vs≤28V | 101 | ||
| Current consumption in Stop Mode at pin VS | IStop | 60 | µA | System in Stop Mode; -40°C≤Tj≤25°C; 5.5V≤Vs≤18V | 102 | ||
| Current consumption in Stop Mode at pin VS (extended Temperature Range) | IStop(T_extend) | 90 | 110 | µA | 25°C<Tj≤85°C | 102 | |
| Current consumption in Stop Mode at pin VS | IStop_V_extend | 4 | mA | -40°C≤Tj≤85°C; 3V≤Vs<5.5V | 102 | ||
| Required decoupling capacitance | CVS1 | 0.1 | µF | ESR<1Ω | 104 | ||
| Required buffer capacitance for stability (load jumps) | CVS2 | 10 | µF | 104 | |||
| Specified Output Current VDDP | IVDDP | 0 | 50 | mA | Specified output current for port supply and additional external loads, excluding on-chip current consumption | 104 | |
| Required decoupling capacitance | CVDDP1 | 0.47 | µF | ESR<1Ω | 104 | ||
| Total required buffer capacitance for stability (load jumps, line steps) | CVDDP2 | 0.47 | 2.2 | µF | 104 | ||
| Output Voltage including line and load regulation @ Active Mode | VDDPOUT | 4.9 | 5 | 5.1 | V | Iload<90mA; Vs≥5.5V | 104 |
| Under Voltage Reset | VDDPUV | 2.55 | 2.7 | 2.8 | V | 105 | |
| Over Current Diagnostic | IVDDPOC | 90 | 220 | mA | Current including VDDC current consumption | 105 | |
| Over Current Limitation | IVDDEXTOC | 100 | 250 | 380 | mA | 109 | |
| Required decoupling capacitance | CVDDC1 | 0.1 | 1 | µF | ESR<1Ω | 106 | |
| Output Voltage including line regulation @ Active Mode | VDDCOUT | 1.44 | 1.5 | 1.56 | V | Iload<40mA | 106 |
| Output Voltage including line and load regulation - Load 1 | VDDEXT_LD1 | 4.9 | 5 | 5.1 | V | Iload≤20mA; Vs≥5.5V | 108 |
| Thermal resistance junction to case | Rth(JC) | 6 | K/W | Measured to Exposed Pad | 103 | ||
| Thermal resistance junction to ambient | Rth(JA) | 33 | K/W | According to JEDEC JESD51-2,-5,-7 at natural convection on FR4 2s2p board | 103 |
CAD (KiCad official)
- Symbol:
TLE9855QXXUMA2 - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)
- 3D model files:
tle9855qxxuma2-etched.step/tle9855qxxuma2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tle9855qxxuma2.step/tle9855qxxuma2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (156 pp, sha256
4f8aee5bdb8a57db, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).