Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLE9855QXXUMA2

Infineon Technologies · Microcontroller Units (MCUs/MPUs/SOCs) · VQFN-48-EP(7x7)

TLE9855QXXUMA2 from Infineon Technologies, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GNDLIN power_in LIN transceiver ground pin.
2 HS output High Side Switch output, Hi-Z after reset; the overview specifies the switch as supplying at least 150 mA.
3 GH1 output Gate drive output for high-side FET 1.
4 SH1 passive Source connection of high-side FET 1.
5 GL1 output Gate drive output for low-side FET 1.
6 SL passive Source connection of the low-side FETs.
7 GL2 output Gate drive output for low-side FET 2.
8 SH2 passive Source connection of high-side FET 2.
9 GH2 output Gate drive output for high-side FET 2.
10 CP2L passive Charge pump capacity 2 low; connect external capacitor.
11 CP2H passive Charge pump capacity 2 high; connect external capacitor.
12 VCP passive Charge pump capacity pin; absolute voltage range for charge pump pins is -0.3 V to 48 V.
13 CP1L passive Charge pump capacity 1 low; connect external capacitor.
14 CP1H passive Charge pump capacity 1 high; connect external capacitor.
15 VSD power_in Battery supply input for the charge pump; absolute maximum 48 V.
16 VDH power_in Voltage drain supply of the high-side MOSFET driver; absolute range -2.8 V to 48 V.
17 MON1 input High voltage monitor input 1; absolute voltage range -28 V to 40 V.
18 MON2 input High voltage monitor input 2; absolute voltage range -28 V to 40 V.
19 MON3 input High voltage monitor input 3; absolute voltage range -28 V to 40 V.
20 MON4 input High voltage monitor input 4; absolute voltage range -28 V to 40 V.
21 GNDP power_in Core supply ground.
22 P0.1 bidirectional Port 0 general purpose I/O with pull-up enabled after reset; alternate functions per Table 6.
23 TMS/DAP1 input Test mode select input with internal pull-down (I/PD) after reset.
24 P0.0 bidirectional Port 0 I/O with pull-up after reset; main function SWD_CLK (Serial Wire Debug clock).
25 RESET bidirectional Bidirectional reset input/output with pull-up; not available during Sleep Mode.
26 P0.2 bidirectional Port 0 general purpose I/O with pull-down enabled after reset; alternate functions per Table 6.
27 P0.3 bidirectional Port 0 general purpose I/O with pull-up enabled after reset; alternate functions per Table 6.
28 P0.4 bidirectional Port 0 general purpose I/O with pull-up enabled after reset; alternate functions per Table 6.
29 P0.5 bidirectional Port 0 general purpose I/O with pull-up enabled after reset; alternate functions per Table 6.
30 GNDP power_in Core supply ground.
31 P1.0 bidirectional Port 1 general purpose I/O, input with pull-up and pull-down disabled after reset; alternate functions per Table 7.
32 P1.1 bidirectional Port 1 general purpose I/O, input with pull-up and pull-down disabled after reset; alternate functions per Table 7.
33 P1.2 bidirectional Port 1 general purpose I/O, input with pull-up and pull-down disabled after reset; alternate functions per Table 7.
34 P1.4 bidirectional Port 1 general purpose I/O, input with pull-up and pull-down disabled after reset; alternate functions per Table 7.
35 OP1 input Negative current sense amplifier input; input voltage range -7 V to 7 V.
36 OP2 input Positive current sense amplifier input; input voltage range -7 V to 7 V.
37 P2.7 input Port 2 input-only pin; ADC1 analog input channel 12 (AN7).
38 P2.3 input Port 2 input-only pin; ADC1 analog input channel 9 (AN3).
39 P2.1 input Port 2 input-only pin; ADC1 analog input channel 7 (AN1).
40 P2.2 input Port 2 input-only pin; ADC1 analog input channel 8 (AN2).
41 P2.0 input Port 2 input-only pin; ADC1 analog input channel 6 (AN0).
42 VDDC power_out Core supply of 1.5 V in Active Mode and 0.9 V in Stop Mode; do not connect external loads, buffer/bypass capacitor only (absolute maximum 1.6 V).
43 GNDA power_in Analog supply ground.
44 VDDP power_out I/O port supply of 5.0 V; do not connect external loads, buffer/bypass capacitors only (absolute maximum 5.5 V).
45 VDDEXT power_out External voltage supply output of 5.0 V at 40 mA.
46 VS power_in Battery supply input; single supply range 5.5 V to 28 V (extended 3 V to 28 V), absolute maximum 40 V load dump.
47 VBAT_SENSE input Battery supply voltage sense input; absolute voltage range -28 V to 40 V.
48 LIN bidirectional LIN bus interface input/output with pull-up after reset; absolute voltage range -28 V to 40 V.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Infineon Technologies
Package VQFN-48-EP(7x7)
Category Single Chip Microcomputer/Microcontroller
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VS voltage VS,max -0.3 40 V Load dump 94
VSD voltage VSD,max -0.3 48 V 94
VSD voltage (extended) VSD,max_extended -2.8 48 V Series resistor RVSD=2.2Ω; t=8ms 94
VDDP voltage VDDP,max -0.3 5.5 V 94
VDDEXT voltage VDDEXT,max -0.3 V 94
VDDC voltage VDDC,max -0.3 1.6 V 94
Voltage at VBAT_SENSE pin VBAT_SENSE,max -28 40 V 94
Voltage at HS pin VHS,max -0.3 V 94
Voltage at LIN pin VLIN,max -28 40 V 94
Voltage at MONx pins VMON,max -28 40 V 94
Voltage at VDH pin VVDH,max -2.8 48 V 94
Voltage at GHx pins VGH -8 48 V 94
Voltage at SHx pins VSH -8 48 V 94
Voltage at GLx pins VGL -8 48 V 94
Voltage at SL pin VSL -8 48 V 95
Voltage at charge pump pins CP1H, CP1L, CP2H, CP2L VCPx -0.3 48 V 95
Injection current in Sleep Mode on P0.x, P1.x, P2.x, TMS and RESET Ixx 5 mA Maximum allowed injection current on single pin or sum of pins in Sleep Mode and unpowered device 96
Injection current on HS IHS 150 mA Current flowing into HS pin (back supply in case of short to battery) 96
Max. current at VCP pin IVCP -15 mA 96
Junction Temperature Tj -40 150 °C 96
Storage Temperature Tstg -55 150 °C 96
ESD Susceptibility HBM all pins VESD1 -2 2 kV JEDEC HBM 96
Supply voltage in Active Mode VS_AM 5.5 28 V 97
Extended Supply voltage in Active Mode-range 1 VS_AM_extend_1 28 40 V Functional with parameter deviation 97
Extended Supply voltage in Active Mode VS_AM_extend_2 3 28 V Functional with parameter deviation 97
Supply voltage in Active Mode for MOSFET Driver Supply VSD_AM 5.4 29 V 97
Extended maximum supply voltage in Active Mode for MOSFET Driver Supply VSD_AM_max_extended 29 32 V Functional with parameter deviation; tmax < 400 ms 98
Supply voltage for LIN Transceiver VS_AM_LIN 5.5 18 V Parameter Specification 98
Extended Supply voltage for LIN Transceiver and Monitoring Inputs (MONx) for all device modes VS_AM_LIN_extend 4 28 V Functional with parameter deviation 98
Supply voltage in Stop Mode VS_Stopmin 3 V 98
Min. Supply voltage in Sleep Mode VS_Sleepmin 3 V 98
Supply Voltage transients slew rate dVS/dt -5 5 V/µs 98
Output current on any GPIO IOH, IOL -5 5 mA 98
Output sum current for all GPIO pins IGPIO,sum -50 50 mA 98
Current Consumption in Active Mode at pin VS I_Vs_40M 30 mA All digital modules enabled, ADCs in sequencer mode, VDDEXT off, Charge Pump on, MOSFET Driver on (PWM 25kHz, CLoad 10 nF), CSA enabled; 3V≤Vs≤28V; fsys=40MHz 99
Current consumption in Active Mode at pin VSD I_VSD 50 mA Charge Pump on, MOSFET Driver enabled and on (PWM 25kHz, CLoad 10 nF) 99
Current consumption in Active Mode at pin VSD - Brake Mode I_VSD_BK 25 mA Charge Pump on, single-stage mode, MOSFET Driver enabled, 2 Low-Side Drivers on but not switching; ICHARGE=15D 99
Current consumption in Sleep Mode at pin VSD - Hold Mode IVSD_SMHM 16 µA Device in Sleep mode, Low Side Gates held statically on; -40°C≤Tj≤85°C 100
Current consumption in Sleep Mode at pin VS ISleep 25 µA System in Sleep Mode, microcontroller not powered, wake via LIN and MON; -40°C≤Tj≤25°C 101
Current consumption in Sleep Mode at pin VS (extended Temperature Range) ISleep(T_extend) 35 µA 25°C<Tj≤85°C; 3V≤Vs≤18V 101
Current consumption in Sleep Mode at pin VS (extended Voltage and Temperature Range) ISleep(V_T_extend) 40 µA 25°C<Tj≤85°C; 3V≤Vs≤28V 101
Current consumption in Sleep Mode at pin VS with cyclic wake ICyclic 30 µA During sleep period; -40°C≤Tj≤25°C; 3V≤Vs≤28V 101
Current consumption in Stop Mode at pin VS IStop 60 µA System in Stop Mode; -40°C≤Tj≤25°C; 5.5V≤Vs≤18V 102
Current consumption in Stop Mode at pin VS (extended Temperature Range) IStop(T_extend) 90 110 µA 25°C<Tj≤85°C 102
Current consumption in Stop Mode at pin VS IStop_V_extend 4 mA -40°C≤Tj≤85°C; 3V≤Vs<5.5V 102
Required decoupling capacitance CVS1 0.1 µF ESR<1Ω 104
Required buffer capacitance for stability (load jumps) CVS2 10 µF 104
Specified Output Current VDDP IVDDP 0 50 mA Specified output current for port supply and additional external loads, excluding on-chip current consumption 104
Required decoupling capacitance CVDDP1 0.47 µF ESR<1Ω 104
Total required buffer capacitance for stability (load jumps, line steps) CVDDP2 0.47 2.2 µF 104
Output Voltage including line and load regulation @ Active Mode VDDPOUT 4.9 5 5.1 V Iload<90mA; Vs≥5.5V 104
Under Voltage Reset VDDPUV 2.55 2.7 2.8 V 105
Over Current Diagnostic IVDDPOC 90 220 mA Current including VDDC current consumption 105
Over Current Limitation IVDDEXTOC 100 250 380 mA 109
Required decoupling capacitance CVDDC1 0.1 1 µF ESR<1Ω 106
Output Voltage including line regulation @ Active Mode VDDCOUT 1.44 1.5 1.56 V Iload<40mA 106
Output Voltage including line and load regulation - Load 1 VDDEXT_LD1 4.9 5 5.1 V Iload≤20mA; Vs≥5.5V 108
Thermal resistance junction to case Rth(JC) 6 K/W Measured to Exposed Pad 103
Thermal resistance junction to ambient Rth(JA) 33 K/W According to JEDEC JESD51-2,-5,-7 at natural convection on FR4 2s2p board 103

CAD (KiCad official)

  • Symbol: TLE9855QXXUMA2
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: tle9855qxxuma2-etched.step / tle9855qxxuma2-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tle9855qxxuma2.step / tle9855qxxuma2.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon Technologies datasheet (156 pp, sha256 4f8aee5bdb8a57db, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF