TLE62083GXUMA1

{
  "slug": "tle62083gxuma1",
  "version": "0.1.0",
  "type": "component",
  "description": "Infineon Technologies Motor Driver ICs, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "tle62083gxuma1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tle62083gxuma1.kicad_sym",
    "tle62083gxuma1.kicad_mod",
    "tle62083gxuma1.glb",
    "tle62083gxuma1.step",
    "tle62083gxuma1.lbr",
    "docs/hero.png",
    "docs/tle62083gxuma1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tle62083gxuma1-hero.glb",
    "tle62083gxuma1-hero.overlay.json",
    "tle62083gxuma1-etched.glb"
  ],
  "component": {
    "mpn": "TLE62083GXUMA1",
    "manufacturer": "Infineon Technologies",
    "package": "SOIC-14",
    "pin_count": 14,
    "category": "Power Management ICs",
    "subcategory": "Motor Driver ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/0cda57a104ac4d388a73d11b410ffbcc.pdf",
    "parts": {
      "symbol": "tle62083gxuma1.kicad_sym",
      "footprint": "tle62083gxuma1.kicad_mod",
      "model_3d": "tle62083gxuma1-hero.glb",
      "model_3d_plain": "tle62083gxuma1-etched.glb",
      "model_3d_step": "tle62083gxuma1-etched.step",
      "model_3d_step_plain": "tle62083gxuma1.step",
      "lbr": "tle62083gxuma1.lbr"
    },
    "distributor_links": {
      "lcsc": "C126689",
      "digikey": "TLE62083GXUMA1TR-ND"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T03:02:43Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "TLE62083GXUMA1TR-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference potential, internally connected to pins 7, 8 and 14 and the cooling tab; place PCB cooling areas close to these pins to reduce thermal resistance."
      },
      {
        "number": "2",
        "name": "OUT3",
        "type": "output",
        "description": "Half-bridge output 3 connected internally to high-side and low-side switches, short circuit protected and open load controlled, with no internal clamp diode or active zenering."
      },
      {
        "number": "3",
        "name": "VS",
        "type": "power_in",
        "description": "Power supply (operating up to 40 V) that needs a blocking capacitor close to GND of 22 µF electrolytic in parallel with 220 nF ceramic."
      },
      {
        "number": "4",
        "name": "CSN",
        "type": "input",
        "description": "Active-low chip-select input with internal active pull-up and CMOS logic levels; should only be transitioned when CLK is low."
      },
      {
        "number": "5",
        "name": "DI",
        "type": "input",
        "description": "Serial data input receiving a 16-bit control word LSB first, sampled on the falling edge of CLK, with active pull-down and CMOS logic levels."
      },
      {
        "number": "6",
        "name": "CLK",
        "type": "input",
        "description": "Serial clock input that clocks the shift register, with internal active pull-down and CMOS logic levels (max 1 MHz)."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground, internally connected to pin 1 (see pin 1)."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground, internally connected to pin 1 (see pin 1)."
      },
      {
        "number": "9",
        "name": "DO",
        "type": "tri_state",
        "description": "Serial data output that transfers diagnosis data to the control device and stays 3-stated unless selected by a low on CSN."
      },
      {
        "number": "10",
        "name": "INH",
        "type": "input",
        "description": "Inhibit input with internal pull-down; pulling it low switches the device into standby."
      },
      {
        "number": "11",
        "name": "VCC",
        "type": "power_in",
        "description": "Logic supply voltage (4.75 V to 5.5 V) that needs a blocking capacitor close to GND of 10 µF electrolytic in parallel with 220 nF ceramic."
      },
      {
        "number": "12",
        "name": "OUT2",
        "type": "output",
        "description": "Half-bridge output 2, same structure and protection as OUT3 (see pin 2)."
      },
      {
        "number": "13",
        "name": "OUT1",
        "type": "output",
        "description": "Half-bridge output 1, same structure and protection as OUT3 (see pin 2)."
      },
      {
        "number": "14",
        "name": "GND",
        "type": "power_in",
        "description": "Ground, internally connected to pin 1 (see pin 1)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: MPN TLE62083GXUMA1 corresponds to the TLE 6208-3 G in PG-DSO-14-35 (the SOIC-14 hint); the datasheet"
        ],
        "pages_sent": 22,
        "cost_usd": 0.1291,
        "at": "2026-10-23T03:02:33"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/0cda57a104ac4d388a73d11b410ffbcc.pdf",
        "pages": 22,
        "sha256": "6961f1616452195c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tle62083gxuma1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          8.7,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tle62083gxuma1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          8.7,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "44fa49df837cdac6fad72d9ab82915578443a144704475f6b417cbe2b980eb96",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}