main
Ray Publish 0.1.0 baae58a

TLE5014P16XUMA1

Infineon Technologies · Position Sensor · SO-16

TLE5014P16XUMA1 from Infineon Technologies, in a SO-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IF1 input Address-coding input for bus-mode programming that must be connected to GND for the SENT/PWM interface.
2 IF2 input Address-coding input for bus-mode programming that must be connected to GND for the SENT/PWM interface.
3 IF3 input Must be connected to IFC.
4 VDD power_in Positive supply voltage pin.
5 GND power_in Supply ground pin.
6 IFA passive Must be connected to GND.
7 IFB bidirectional Interface pin for SENT, SPC, PWM or SICI communication.
8 IFC output Address-coding output for bus-mode programming that must be connected to IF3.
9 n.c. unconnected Not connected; the datasheet specifies no function for this pin.
10 n.c. unconnected Not connected; the datasheet specifies no function for this pin.
11 n.c. unconnected Not connected; the datasheet specifies no function for this pin.
12 n.c. unconnected Not connected; the datasheet specifies no function for this pin.
13 n.c. unconnected Not connected; the datasheet specifies no function for this pin.
14 n.c. unconnected Not connected; the datasheet specifies no function for this pin.
15 n.c. unconnected Not connected; the datasheet specifies no function for this pin.
16 n.c. unconnected Not connected; the datasheet specifies no function for this pin.

Key specifications

Parameter Value
Manufacturer Infineon Technologies
Package SO-16
Category Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Absolute maximum supply voltage VDD -18 26 V for 40h, no damage of device; -18V means VDD < GND 12
Voltage peaks VDD VDD 30 V for 50µs, no current limitation 12
Absolute maximum voltage for pin IFB VIO -18 19.5 V for 40h; no damage of device, -18V means VDD < GND 12
Absolute maximum voltage for pin IF1, IF2, IF3, IFA, IFC VIF -0.3 6 V no damage of device 12
Voltage peaks for pin IFB VIO 30 V for 50µs; no current limitation 12
Maximum current through output in case of short circuit Ishort 40 mA for 40h, no damage of the device, current limited by device 12
Maximum ambient temperature TA -40 125 °C Q100, Grade 1 12
Maximum allowed magnetic field B 200 mT max 5 min @ TA = 25°C 12
Maximum allowed magnetic field B 150 mT max 5 h @ TA = 25°C 12
Operating supply voltage VDD 4.2 5.5 V - 13
Supply voltage slew rate VDD_slew 0.1 108 V/s - 13
Operating ambient temperature TA -40 125 °C - 13
Angle speed n 10000 °/s - 13
Mission profile TA,max 125 °C for 2000h 13
Total life time ttot_life 19 a additional 2a storage time 13
Angle measurement field range @ 25°C B 25 80 mT TA = 25°C, valid for NdFeB magnet 14
Operating supply current IDD 12 15 mA - 15
Time between supply voltage reaches reset value and valid angle value is available on output tPon 7 ms without interface delay 15
Overvoltage detection on VDD VOV 6.5 7 V in an overvoltage condition the output switches to tri-state 15
Undervoltage detection on VDD VUV 3.8 4.1 V in an undervoltage condition the sensor performs a reset 15
Ripple current due to PWM slopes Iripple 9 mA peak-peak; VDD = 5V, 30kHz lowpass filter 15
Internal clock tolerance Δfclock -5 5 % including temperature and lifetime 15
Signal delay time between real angle and angle output (PWM rising edge, without interface delay) incl. jitter and oscillator tolerances tadel 36.7 51.2 67.4 µs min/max values include already the jitter tdeljit 17
Variation of delay time (jitter) tdeljit -14 14 µs see Figure 3-5, already included in tadel specification 17
Electro-static discharge voltage (HBM) for pins VDD, GND, IFB VHBM -4 4 kV HBM contact discharge, ANSI/ESDA/JEDEC JS-001 19
Electro-static discharge voltage (HBM) for pins IF1, IF2, IF3, IFA, IFC VHBM -2 2 kV HBM contact discharge, ANSI/ESDA/JEDEC JS-001 19
Electro-static discharge voltage (CDM) for all pins except corner pins VCDM -0.5 0.5 kV JESD22-C101 19
Electro-static discharge voltage (CDM) for corner pins only VCDM -0.75 0.75 kV JESD22-C101 19
Accuracy over temperature w/o look-up table AErr,T 0.8 ° 0h, over temperature, B = 33mT to 80mT 20
Accuracy over temperature and lifetime w/o look-up table AErr,s 1 ° 33mT…80mT; lifetime stress: TA=125°C/2000h 20
Accuracy over temperature and lifetime with look-up table AErr,sLUT 0.85 ° B = 33mT to 80mT; lifetime stress: TA=125°C/2000h; with look-up table correction 20
Hysteresis AHyst 0.16 ° B = 33mT to 80mT; value includes quantization error of 12bit angle output 20
Accuracy over temperature w/o look-up table (-40°C < TA < 85°C) AErr,T 0.8 ° 0h, over temperature; magnetic field range 33mT < B < 50mT 20
Accuracy over temperature and lifetime w/o look-up table (-40°C < TA < 85°C) AErr,s 0.9 ° lifetime stress: TA=85°C/1000h/50mT 20
Accuracy over temperature and lifetime with look-up table (-40°C < TA < 85°C) AErr,sLUT 0.65 ° lifetime stress: TA=85°C/1000h/50mT; with look-up table correction 20
Number of possible NVM programming cycles nProg 100 - 21
Time for programming of whole NVM (customer relevant part) tProg 0.5 s incl. look-up table, configuration, customer ID; with 100kbit/s 21
PWM output frequencies fPWM1 200 2200 Hz configurable 24
Data duty cycle range DCdata 5 95 % configurable, the 12bit angle value is mapped to this duty cycle range 24
Diagnostic duty cycle, low DCdiag,low 0 25 % configurable, fault indication 24
Diagnostic duty cycle, high DCdiag,high 75 100 % configurable, BIST error indication or reset indication 24
PWM frequency tolerance PWMfreq_tol -5 5 % - 25
Power dissipation PWM scenario P 82.5 mW PWM; VDD 5.5 V, IDD 15 mA; worst case within operating range 22
Thermal resistance junction to air RthJA 150 K/W according to Jedec JESD51-7 39
Thermal resistance junction to case RthJC 45 K/W - 39
Thermal resistance junction to lead RthJL 70 K/W - 39
Die tilt in package 3 ° in respect to the z-axis and reference plane 39
Die rotational displacement in package 3 ° in respect to the reference axis 39
Placement tolerance of die in package 100 µm in x and y direction 39

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC containing angle base & rotation direction information and a 32bit sensor ID. In each SPC frame, one bit of information is transmitted. The start of the short serial message is indicated by 30
contacts tin Lead Frame Cu Plating Sn 100% > 7 μm 39

CAD (KiCad official)

  • Symbol: TLE5014P16XUMA1
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SO-16 (KiCad packages3D, STEP)
  • 3D model files: tle5014p16xuma1-etched.step / tle5014p16xuma1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tle5014p16xuma1.step / tle5014p16xuma1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon Technologies datasheet (45 pp, sha256 9ba7c749f7032e0b, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF