Generated by kicad-footprint-generator · KiCad file format 20260206
TLE5014P16XUMA1
Infineon Technologies · Position Sensor · SO-16
TLE5014P16XUMA1 from Infineon Technologies, in a SO-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IF1 | input | Address-coding input for bus-mode programming that must be connected to GND for the SENT/PWM interface. |
| 2 | IF2 | input | Address-coding input for bus-mode programming that must be connected to GND for the SENT/PWM interface. |
| 3 | IF3 | input | Must be connected to IFC. |
| 4 | VDD | power_in | Positive supply voltage pin. |
| 5 | GND | power_in | Supply ground pin. |
| 6 | IFA | passive | Must be connected to GND. |
| 7 | IFB | bidirectional | Interface pin for SENT, SPC, PWM or SICI communication. |
| 8 | IFC | output | Address-coding output for bus-mode programming that must be connected to IF3. |
| 9 | n.c. | unconnected | Not connected; the datasheet specifies no function for this pin. |
| 10 | n.c. | unconnected | Not connected; the datasheet specifies no function for this pin. |
| 11 | n.c. | unconnected | Not connected; the datasheet specifies no function for this pin. |
| 12 | n.c. | unconnected | Not connected; the datasheet specifies no function for this pin. |
| 13 | n.c. | unconnected | Not connected; the datasheet specifies no function for this pin. |
| 14 | n.c. | unconnected | Not connected; the datasheet specifies no function for this pin. |
| 15 | n.c. | unconnected | Not connected; the datasheet specifies no function for this pin. |
| 16 | n.c. | unconnected | Not connected; the datasheet specifies no function for this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | SO-16 |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Absolute maximum supply voltage | VDD | -18 | 26 | V | for 40h, no damage of device; -18V means VDD < GND | 12 | |
| Voltage peaks VDD | VDD | 30 | V | for 50µs, no current limitation | 12 | ||
| Absolute maximum voltage for pin IFB | VIO | -18 | 19.5 | V | for 40h; no damage of device, -18V means VDD < GND | 12 | |
| Absolute maximum voltage for pin IF1, IF2, IF3, IFA, IFC | VIF | -0.3 | 6 | V | no damage of device | 12 | |
| Voltage peaks for pin IFB | VIO | 30 | V | for 50µs; no current limitation | 12 | ||
| Maximum current through output in case of short circuit | Ishort | 40 | mA | for 40h, no damage of the device, current limited by device | 12 | ||
| Maximum ambient temperature | TA | -40 | 125 | °C | Q100, Grade 1 | 12 | |
| Maximum allowed magnetic field | B | 200 | mT | max 5 min @ TA = 25°C | 12 | ||
| Maximum allowed magnetic field | B | 150 | mT | max 5 h @ TA = 25°C | 12 | ||
| Operating supply voltage | VDD | 4.2 | 5.5 | V | - | 13 | |
| Supply voltage slew rate | VDD_slew | 0.1 | 108 | V/s | - | 13 | |
| Operating ambient temperature | TA | -40 | 125 | °C | - | 13 | |
| Angle speed | n | 10000 | °/s | - | 13 | ||
| Mission profile | TA,max | 125 | °C | for 2000h | 13 | ||
| Total life time | ttot_life | 19 | a | additional 2a storage time | 13 | ||
| Angle measurement field range @ 25°C | B | 25 | 80 | mT | TA = 25°C, valid for NdFeB magnet | 14 | |
| Operating supply current | IDD | 12 | 15 | mA | - | 15 | |
| Time between supply voltage reaches reset value and valid angle value is available on output | tPon | 7 | ms | without interface delay | 15 | ||
| Overvoltage detection on VDD | VOV | 6.5 | 7 | V | in an overvoltage condition the output switches to tri-state | 15 | |
| Undervoltage detection on VDD | VUV | 3.8 | 4.1 | V | in an undervoltage condition the sensor performs a reset | 15 | |
| Ripple current due to PWM slopes | Iripple | 9 | mA | peak-peak; VDD = 5V, 30kHz lowpass filter | 15 | ||
| Internal clock tolerance | Δfclock | -5 | 5 | % | including temperature and lifetime | 15 | |
| Signal delay time between real angle and angle output (PWM rising edge, without interface delay) incl. jitter and oscillator tolerances | tadel | 36.7 | 51.2 | 67.4 | µs | min/max values include already the jitter tdeljit | 17 |
| Variation of delay time (jitter) | tdeljit | -14 | 14 | µs | see Figure 3-5, already included in tadel specification | 17 | |
| Electro-static discharge voltage (HBM) for pins VDD, GND, IFB | VHBM | -4 | 4 | kV | HBM contact discharge, ANSI/ESDA/JEDEC JS-001 | 19 | |
| Electro-static discharge voltage (HBM) for pins IF1, IF2, IF3, IFA, IFC | VHBM | -2 | 2 | kV | HBM contact discharge, ANSI/ESDA/JEDEC JS-001 | 19 | |
| Electro-static discharge voltage (CDM) for all pins except corner pins | VCDM | -0.5 | 0.5 | kV | JESD22-C101 | 19 | |
| Electro-static discharge voltage (CDM) for corner pins only | VCDM | -0.75 | 0.75 | kV | JESD22-C101 | 19 | |
| Accuracy over temperature w/o look-up table | AErr,T | 0.8 | ° | 0h, over temperature, B = 33mT to 80mT | 20 | ||
| Accuracy over temperature and lifetime w/o look-up table | AErr,s | 1 | ° | 33mT…80mT; lifetime stress: TA=125°C/2000h | 20 | ||
| Accuracy over temperature and lifetime with look-up table | AErr,sLUT | 0.85 | ° | B = 33mT to 80mT; lifetime stress: TA=125°C/2000h; with look-up table correction | 20 | ||
| Hysteresis | AHyst | 0.16 | ° | B = 33mT to 80mT; value includes quantization error of 12bit angle output | 20 | ||
| Accuracy over temperature w/o look-up table (-40°C < TA < 85°C) | AErr,T | 0.8 | ° | 0h, over temperature; magnetic field range 33mT < B < 50mT | 20 | ||
| Accuracy over temperature and lifetime w/o look-up table (-40°C < TA < 85°C) | AErr,s | 0.9 | ° | lifetime stress: TA=85°C/1000h/50mT | 20 | ||
| Accuracy over temperature and lifetime with look-up table (-40°C < TA < 85°C) | AErr,sLUT | 0.65 | ° | lifetime stress: TA=85°C/1000h/50mT; with look-up table correction | 20 | ||
| Number of possible NVM programming cycles | nProg | 100 | - | 21 | |||
| Time for programming of whole NVM (customer relevant part) | tProg | 0.5 | s | incl. look-up table, configuration, customer ID; with 100kbit/s | 21 | ||
| PWM output frequencies | fPWM1 | 200 | 2200 | Hz | configurable | 24 | |
| Data duty cycle range | DCdata | 5 | 95 | % | configurable, the 12bit angle value is mapped to this duty cycle range | 24 | |
| Diagnostic duty cycle, low | DCdiag,low | 0 | 25 | % | configurable, fault indication | 24 | |
| Diagnostic duty cycle, high | DCdiag,high | 75 | 100 | % | configurable, BIST error indication or reset indication | 24 | |
| PWM frequency tolerance | PWMfreq_tol | -5 | 5 | % | - | 25 | |
| Power dissipation PWM scenario | P | 82.5 | mW | PWM; VDD 5.5 V, IDD 15 mA; worst case within operating range | 22 | ||
| Thermal resistance junction to air | RthJA | 150 | K/W | according to Jedec JESD51-7 | 39 | ||
| Thermal resistance junction to case | RthJC | 45 | K/W | - | 39 | ||
| Thermal resistance junction to lead | RthJL | 70 | K/W | - | 39 | ||
| Die tilt in package | 3 | ° | in respect to the z-axis and reference plane | 39 | |||
| Die rotational displacement in package | 3 | ° | in respect to the reference axis | 39 | |||
| Placement tolerance of die in package | 100 | µm | in x and y direction | 39 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | containing angle base & rotation direction information and a 32bit sensor ID. In each SPC frame, one bit of information is transmitted. The start of the short serial message is indicated by | 30 | |
| contacts | tin | Lead Frame Cu Plating Sn 100% > 7 μm | 39 |
CAD (KiCad official)
- Symbol:
TLE5014P16XUMA1 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SO-16 (KiCad packages3D, STEP)
- 3D model files:
tle5014p16xuma1-etched.step/tle5014p16xuma1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tle5014p16xuma1.step/tle5014p16xuma1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (45 pp, sha256
9ba7c749f7032e0b, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).