Generated by kicad-footprint-generator · KiCad file format 20260206
TLC6C5912PWR
Texas Instruments · LED Drivers · TSSOP-20
TLC6C5912PWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Power supply pin for the device, 3 V to 5.5 V recommended; TI recommends a 0.1 µF ceramic capacitor close to the pin. |
| 2 | SER_IN | input | Serial-data input; data on SER IN loads into the internal register on each rising edge of SRCK. |
| 3 | DRAIN0 | output | Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage. |
| 4 | DRAIN1 | output | Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage. |
| 5 | DRAIN2 | output | Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage. |
| 6 | DRAIN3 | output | Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage. |
| 7 | DRAIN4 | output | Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage. |
| 8 | DRAIN5 | output | Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage. |
| 9 | CLR | input | Active-low shift register clear; driving CLR low clears all registers, and the storage register transfers data to the output buffer when CLR is high. |
| 10 | G | input | Active-low output enable; low enables all drain channels according to the output-latch register content, and high turns all channels off. |
| 11 | SER_OUT | output | Serial-data output of the 12-bit shift register used for cascading; connect to SER IN of the next device, and data transfers on the falling edge of SRCK. |
| 12 | RCK | input | Storage register clock; data in each shift register stage transfers to the storage register on the rising edge of RCK. |
| 13 | DRAIN6 | output | Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage. |
| 14 | DRAIN7 | output | Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage. |
| 15 | DRAIN8 | output | Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage. |
| 16 | DRAIN9 | output | Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage. |
| 17 | DRAIN10 | output | Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage. |
| 18 | DRAIN11 | output | Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage. |
| 19 | SRCK | input | Shift-register clock input; on each rising SRCK edge data transfers from SER IN into the internal shift register, with a maximum frequency of 10 MHz. |
| 20 | GND | power_in | Power ground reference pin that must connect to the ground plane on the PCB. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic supply voltage | VCC | 8 | V | over operating free-air temperature range | 4 | ||
| Logic input voltage | VI | -0.3 | 8 | V | over operating free-air temperature range | 4 | |
| Power DMOS drain-to-source voltage | VDS | 42 | V | over operating free-air temperature range | 4 | ||
| Operating ambient temperature | Top | 105 | °C | over operating free-air temperature range | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | over operating free-air temperature range | 4 | |
| Storage temperature | Tstg | -55 | 165 | °C | over operating free-air temperature range | 4 | |
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human-body model per ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD CDM | V(ESD) | -750 | 750 | V | Charged-device model per JEDEC JESD22-C101 | 4 | |
| Supply voltage | VCC | 3 | 5.5 | V | 4 | ||
| High-level input voltage | VIH | 2.4 | V | 4 | |||
| Low-level input voltage | VIL | 0.7 | V | 4 | |||
| Setup time, SER IN high before SRCK↑ | tsu | 15 | ns | 4 | |||
| Hold time, SER IN high after SRCK↑ | th | 15 | ns | 4 | |||
| Pulse duration | tw | 40 | ns | 4 | |||
| Operating ambient temperature | TA | -40 | 105 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 114.8 | °C/W | PW (TSSOP) 20 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 44.1 | °C/W | PW (TSSOP) 20 pins | 5 | ||
| Junction-to-board thermal resistance | RθJB | 61.3 | °C/W | PW (TSSOP) 20 pins | 5 | ||
| Drain-to-source voltage, DRAIN0 to DRAIN11 | 40 | V | VCC = 5 V, TA = 25°C | 5 | |||
| High-level output voltage, SER OUT | VOH | 4.9 | 4.99 | V | IOH = -20 μA, VCC = 5 V | 5 | |
| High-level output voltage, SER OUT | VOH | 4.5 | 4.69 | V | IOH = -4 mA, VCC = 5 V | 5 | |
| Low-level output voltage, SER OUT | VOL | 0.001 | 0.01 | V | IOH = 20 μA, VCC = 5 V | 5 | |
| Low-level output voltage, SER OUT | VOL | 0.25 | 0.4 | V | IOH = 4 mA, VCC = 5 V | 5 | |
| High-level input current | IIH | 0.2 | μA | VCC = 5 V, VI = VCC | 5 | ||
| Low-level input current | IIL | -0.2 | μA | VCC = 5 V, VI = 0 | 5 | ||
| Logic supply current, all outputs off | ICC | 0.1 | 1 | μA | VCC = 5 V, No clock signal, All outputs off | 5 | |
| Logic supply current, all outputs on | ICC | 130 | 170 | μA | VCC = 5 V, No clock signal, All outputs on | 5 | |
| Logic supply current at frequency | ICC(FRQ) | 300 | µA | fSRCK = 5 MHz, CL = 30 pF, all outputs on | 5 | ||
| Off-state drain current | IDSX | 0.1 | μA | VDS = 30 V, VCC = 5 V | 5 | ||
| Off-state drain current | IDSX | 0.15 | 0.3 | μA | VDS = 30 V, TC = 125°C, VCC = 5 V | 5 | |
| Static drain-source on-state resistance | rDS(on) | 6 | 7.4 | 8.6 | Ω | ID = 20 mA, VCC = 5 V, TA = 25°C, single channel ON | 5 |
| Static drain-source on-state resistance | rDS(on) | 6.7 | 8.9 | 9.6 | Ω | ID = 20 mA, VCC = 5 V, TA = 25°C, all channels ON | 5 |
| Static drain-source on-state resistance | rDS(on) | 7.9 | 9.3 | 11.2 | Ω | ID = 20 mA, VCC = 3.3 V, TA = 25°C, single channel ON | 5 |
| Static drain-source on-state resistance | rDS(on) | 8.7 | 10.6 | 12.3 | Ω | ID = 20 mA, VCC = 3.3 V, TA = 25°C, all channels ON | 5 |
| Static drain-source on-state resistance | rDS(on) | 9.1 | 11.2 | 12.9 | Ω | ID = 20 mA, VCC = 5 V, TA = 105°C, single channel ON | 5 |
| Static drain-source on-state resistance | rDS(on) | 10.3 | 13 | 14.5 | Ω | ID = 20 mA, VCC = 5 V, TA = 105°C, all channels ON | 5 |
| Static drain-source on-state resistance | rDS(on) | 11.6 | 13.7 | 16.4 | Ω | ID = 20 mA, VCC = 3.3 V, TA = 105°C, single channel ON | 5 |
| Static drain-source on-state resistance | rDS(on) | 12.8 | 15.6 | 18.2 | Ω | ID = 20 mA, VCC = 3.3 V, TA = 105°C, all channels ON | 5 |
| Thermal shutdown trip point | TSHUTDOWN | 150 | 175 | 200 | °C | 5 | |
| Thermal shutdown hysteresis | tHYS | 15 | °C | 5 | |||
| Propagation delay, low-to-high-level output from G | tPLH | 210 | ns | CL = 30 pF, ID = 48 mA | 5 | ||
| Propagation delay, high-to-low-level output from G | tPHL | 75 | ns | CL = 30 pF, ID = 48 mA | 5 | ||
| Rise time, drain output | tr | 250 | ns | CL = 30 pF, ID = 48 mA | 5 | ||
| Fall time, drain output | tf | 200 | ns | CL = 30 pF, ID = 48 mA | 5 | ||
| Propagation delay time, SRCK↓ to SEROUT | tpd | 35 | ns | CL = 30 pF, ID = 48 mA | 5 | ||
| SEROUT rise time (10% to 90%) | tor | 20 | ns | CL = 30 pF | 5 | ||
| SEROUT fall time (90% to 10%) | tof | 20 | ns | CL = 30 pF | 5 | ||
| Serial clock frequency | f(SRCK) | 10 | MHz | CL = 30 pF, ID = 20 mA | 6 | ||
| SRCK pulse duration, high | tSRCK_WH | 30 | ns | 6 | |||
| SRCK pulse duration, low | tSRCK_WL | 30 | ns | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | bypass capacitors near the corresponding pin. Maximize the copper coverage on the PCB to increase the thermal conductivity of the board. The major heat-flow | 15 |
CAD (KiCad official)
- Symbol:
TLC6C5912PWR - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
tlc6c5912pwr-etched.step/tlc6c5912pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc6c5912pwr.step/tlc6c5912pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
4fff452a953bf71f, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).