Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLC6C5912PWR

Texas Instruments · LED Drivers · TSSOP-20

TLC6C5912PWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Power supply pin for the device, 3 V to 5.5 V recommended; TI recommends a 0.1 µF ceramic capacitor close to the pin.
2 SER_IN input Serial-data input; data on SER IN loads into the internal register on each rising edge of SRCK.
3 DRAIN0 output Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage.
4 DRAIN1 output Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage.
5 DRAIN2 output Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage.
6 DRAIN3 output Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage.
7 DRAIN4 output Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage.
8 DRAIN5 output Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage.
9 CLR input Active-low shift register clear; driving CLR low clears all registers, and the storage register transfers data to the output buffer when CLR is high.
10 G input Active-low output enable; low enables all drain channels according to the output-latch register content, and high turns all channels off.
11 SER_OUT output Serial-data output of the 12-bit shift register used for cascading; connect to SER IN of the next device, and data transfers on the falling edge of SRCK.
12 RCK input Storage register clock; data in each shift register stage transfers to the storage register on the rising edge of RCK.
13 DRAIN6 output Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage.
14 DRAIN7 output Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage.
15 DRAIN8 output Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage.
16 DRAIN9 output Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage.
17 DRAIN10 output Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage.
18 DRAIN11 output Open-drain LED current-sink output that connects to an LED cathode and survives up to a 40-V LED supply voltage.
19 SRCK input Shift-register clock input; on each rising SRCK edge data transfers from SER IN into the internal shift register, with a maximum frequency of 10 MHz.
20 GND power_in Power ground reference pin that must connect to the ground plane on the PCB.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-20
Category Nixie Tube Driver/LED Driver
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic supply voltage VCC 8 V over operating free-air temperature range 4
Logic input voltage VI -0.3 8 V over operating free-air temperature range 4
Power DMOS drain-to-source voltage VDS 42 V over operating free-air temperature range 4
Operating ambient temperature Top 105 °C over operating free-air temperature range 4
Operating junction temperature TJ -40 125 °C over operating free-air temperature range 4
Storage temperature Tstg -55 165 °C over operating free-air temperature range 4
ESD HBM V(ESD) -2000 2000 V Human-body model per ANSI/ESDA/JEDEC JS-001 4
ESD CDM V(ESD) -750 750 V Charged-device model per JEDEC JESD22-C101 4
Supply voltage VCC 3 5.5 V 4
High-level input voltage VIH 2.4 V 4
Low-level input voltage VIL 0.7 V 4
Setup time, SER IN high before SRCK↑ tsu 15 ns 4
Hold time, SER IN high after SRCK↑ th 15 ns 4
Pulse duration tw 40 ns 4
Operating ambient temperature TA -40 105 °C 4
Junction-to-ambient thermal resistance RθJA 114.8 °C/W PW (TSSOP) 20 pins 5
Junction-to-case (top) thermal resistance RθJC(top) 44.1 °C/W PW (TSSOP) 20 pins 5
Junction-to-board thermal resistance RθJB 61.3 °C/W PW (TSSOP) 20 pins 5
Drain-to-source voltage, DRAIN0 to DRAIN11 40 V VCC = 5 V, TA = 25°C 5
High-level output voltage, SER OUT VOH 4.9 4.99 V IOH = -20 μA, VCC = 5 V 5
High-level output voltage, SER OUT VOH 4.5 4.69 V IOH = -4 mA, VCC = 5 V 5
Low-level output voltage, SER OUT VOL 0.001 0.01 V IOH = 20 μA, VCC = 5 V 5
Low-level output voltage, SER OUT VOL 0.25 0.4 V IOH = 4 mA, VCC = 5 V 5
High-level input current IIH 0.2 μA VCC = 5 V, VI = VCC 5
Low-level input current IIL -0.2 μA VCC = 5 V, VI = 0 5
Logic supply current, all outputs off ICC 0.1 1 μA VCC = 5 V, No clock signal, All outputs off 5
Logic supply current, all outputs on ICC 130 170 μA VCC = 5 V, No clock signal, All outputs on 5
Logic supply current at frequency ICC(FRQ) 300 µA fSRCK = 5 MHz, CL = 30 pF, all outputs on 5
Off-state drain current IDSX 0.1 μA VDS = 30 V, VCC = 5 V 5
Off-state drain current IDSX 0.15 0.3 μA VDS = 30 V, TC = 125°C, VCC = 5 V 5
Static drain-source on-state resistance rDS(on) 6 7.4 8.6 Ω ID = 20 mA, VCC = 5 V, TA = 25°C, single channel ON 5
Static drain-source on-state resistance rDS(on) 6.7 8.9 9.6 Ω ID = 20 mA, VCC = 5 V, TA = 25°C, all channels ON 5
Static drain-source on-state resistance rDS(on) 7.9 9.3 11.2 Ω ID = 20 mA, VCC = 3.3 V, TA = 25°C, single channel ON 5
Static drain-source on-state resistance rDS(on) 8.7 10.6 12.3 Ω ID = 20 mA, VCC = 3.3 V, TA = 25°C, all channels ON 5
Static drain-source on-state resistance rDS(on) 9.1 11.2 12.9 Ω ID = 20 mA, VCC = 5 V, TA = 105°C, single channel ON 5
Static drain-source on-state resistance rDS(on) 10.3 13 14.5 Ω ID = 20 mA, VCC = 5 V, TA = 105°C, all channels ON 5
Static drain-source on-state resistance rDS(on) 11.6 13.7 16.4 Ω ID = 20 mA, VCC = 3.3 V, TA = 105°C, single channel ON 5
Static drain-source on-state resistance rDS(on) 12.8 15.6 18.2 Ω ID = 20 mA, VCC = 3.3 V, TA = 105°C, all channels ON 5
Thermal shutdown trip point TSHUTDOWN 150 175 200 °C 5
Thermal shutdown hysteresis tHYS 15 °C 5
Propagation delay, low-to-high-level output from G tPLH 210 ns CL = 30 pF, ID = 48 mA 5
Propagation delay, high-to-low-level output from G tPHL 75 ns CL = 30 pF, ID = 48 mA 5
Rise time, drain output tr 250 ns CL = 30 pF, ID = 48 mA 5
Fall time, drain output tf 200 ns CL = 30 pF, ID = 48 mA 5
Propagation delay time, SRCK↓ to SEROUT tpd 35 ns CL = 30 pF, ID = 48 mA 5
SEROUT rise time (10% to 90%) tor 20 ns CL = 30 pF 5
SEROUT fall time (90% to 10%) tof 20 ns CL = 30 pF 5
Serial clock frequency f(SRCK) 10 MHz CL = 30 pF, ID = 20 mA 6
SRCK pulse duration, high tSRCK_WH 30 ns 6
SRCK pulse duration, low tSRCK_WL 30 ns 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper bypass capacitors near the corresponding pin. Maximize the copper coverage on the PCB to increase the thermal conductivity of the board. The major heat-flow 15

CAD (KiCad official)

  • Symbol: TLC6C5912PWR
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: tlc6c5912pwr-etched.step / tlc6c5912pwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlc6c5912pwr.step / tlc6c5912pwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (24 pp, sha256 4fff452a953bf71f, retrieved 2026-10-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF