main
Ray Set visibility: public bbea66f
{
  "schema_version": 1,
  "type": "component",
  "slug": "tlc5940qpwprep",
  "title": "TLC5940QPWPREP",
  "brief": "Texas Instruments LED Drivers, TSSOP-28-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "nixie tube driver-led driver",
    "tlc5940qpwprep",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TLC5940QPWPREP",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-28-EP",
    "pin_count": 29,
    "category": "Nixie Tube Driver/LED Driver",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tlc5940-ep",
    "parts": {
      "symbol": "tlc5940qpwprep.kicad_sym",
      "footprint": "tlc5940qpwprep.kicad_mod",
      "model_3d": "tlc5940qpwprep-hero.glb",
      "model_3d_plain": "tlc5940qpwprep.glb",
      "model_3d_step": "tlc5940qpwprep-etched.step",
      "model_3d_step_plain": "tlc5940qpwprep.step",
      "lbr": "tlc5940qpwprep.lbr"
    },
    "distributor_links": {
      "lcsc": "C2678845",
      "digikey": "296-27433-2-ND",
      "mouser": "595-TLC5940QPWPREP"
    },
    "distributor_check": {
      "checked_at": "2026-10-10T23:35:20Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-27433-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TLC5940QPWPREP",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground terminal of the device."
      },
      {
        "number": "2",
        "name": "BLANK",
        "type": "input",
        "description": "Blanks all outputs: when BLANK is high all OUTn are forced off and the GS counter is reset, and when BLANK is low the OUTn are controlled by grayscale PWM."
      },
      {
        "number": "3",
        "name": "XLAT",
        "type": "input",
        "description": "Level-triggered latch signal: when high the device writes data from the input shift register to the GS register (VPRG low) or DC register (VPRG high), and when low the GS or DC register data is held constant."
      },
      {
        "number": "4",
        "name": "SCLK",
        "type": "input",
        "description": "Serial data shift clock, with a data shift clock frequency of up to 30 MHz."
      },
      {
        "number": "5",
        "name": "SIN",
        "type": "input",
        "description": "Serial data input."
      },
      {
        "number": "6",
        "name": "VPRG",
        "type": "input",
        "description": "Multifunction input: GND selects GS mode, VCC selects DC mode, and V(VPRG) allows DC register data to be programmed into the DC EEPROM when DCPRG is high (EEPROM data default 3Fh)."
      },
      {
        "number": "7",
        "name": "OUT0",
        "type": "output",
        "description": "Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5)."
      },
      {
        "number": "8",
        "name": "OUT1",
        "type": "output",
        "description": "Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5)."
      },
      {
        "number": "9",
        "name": "OUT2",
        "type": "output",
        "description": "Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5)."
      },
      {
        "number": "10",
        "name": "OUT3",
        "type": "output",
        "description": "Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5)."
      },
      {
        "number": "11",
        "name": "OUT4",
        "type": "output",
        "description": "Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5)."
      },
      {
        "number": "12",
        "name": "OUT5",
        "type": "output",
        "description": "Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5)."
      },
      {
        "number": "13",
        "name": "OUT6",
        "type": "output",
        "description": "Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5)."
      },
      {
        "number": "14",
        "name": "OUT7",
        "type": "output",
        "description": "Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5)."
      },
      {
        "number": "15",
        "name": "OUT8",
        "type": "output",
        "description": "Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5)."
      },
      {
        "number": "16",
        "name": "OUT9",
        "type": "output",
        "description": "Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5)."
      },
      {
        "number": "17",
        "name": "OUT10",
        "type": "output",
        "description": "Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5)."
      },
      {
        "number": "18",
        "name": "OUT11",
        "type": "output",
        "description": "Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5)."
      },
      {
        "number": "19",
        "name": "OUT12",
        "type": "output",
        "description": "Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5)."
      },
      {
        "number": "20",
        "name": "OUT13",
        "type": "output",
        "description": "Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5)."
      },
      {
        "number": "21",
        "name": "OUT14",
        "type": "output",
        "description": "Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5)."
      },
      {
        "number": "22",
        "name": "OUT15",
        "type": "output",
        "description": "Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5)."
      },
      {
        "number": "23",
        "name": "XERR",
        "type": "output",
        "description": "Open-drain error output that goes low when LOD (LED open detection) or TEF (thermal error flag) is detected."
      },
      {
        "number": "24",
        "name": "SOUT",
        "type": "output",
        "description": "Serial data output."
      },
      {
        "number": "25",
        "name": "GSCLK",
        "type": "input",
        "description": "Reference clock for grayscale PWM control, with a grayscale clock frequency of up to 30 MHz."
      },
      {
        "number": "26",
        "name": "DCPRG",
        "type": "input",
        "description": "Switches the DC data input: DC is connected to the EEPROM when low and to the DC register when high, and it also controls EEPROM writing when VPRG = V(PRG) (EEPROM data default 3Fh)."
      },
      {
        "number": "27",
        "name": "IREF",
        "type": "input",
        "description": "Reference current terminal; a single external resistor sets the maximum current value of all 16 channels."
      },
      {
        "number": "28",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply voltage, 3 V to 5.5 V recommended."
      },
      {
        "number": "29",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Output current and voltage limits (0 to 72 mA, 17 V) for OUT0-OUT15 come from the Recommended Operat; VCC range (3 V to 5.5 V) comes from the Recommended Operating Conditions on page 5 and Features on p; The HTSSOP-28 package has an exposed thermal pad shown in the drawing but not given a pin number in ",
          "exposed pad 29 added from the footprint"
        ],
        "pages_sent": 8,
        "cost_usd": 0.0628,
        "at": "2026-10-10T23:35:07"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tlc5940-ep",
        "pages": 33,
        "sha256": "4188182915dbd635",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 29,
        "described": 29,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tlc5940qpwprep.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.2,
          9.7,
          1.05
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "ff242f1d3be9d09e7f929707a2c5b1ee974a4f882053b04bcdb1cd2cb21223ef",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tlc5940qpwprep-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.2,
          9.7,
          1.05
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "e170e08c4944fdf6962b6cb0c0572487adb6b2bfc8cd10eebf4439ca046cf9c5",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-28-EP",
      "Category": "Nixie Tube Driver/LED Driver",
      "Pins": "29"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tlc5940qpwprep"
  ],
  "discovery_pitch": "TLC5940QPWPREP (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tlc5940qpwprep.kicad_sym",
    "tlc5940qpwprep.kicad_mod",
    "tlc5940qpwprep.glb",
    "tlc5940qpwprep.step",
    "tlc5940qpwprep.lbr",
    "docs/hero.png",
    "docs/tlc5940qpwprep-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tlc5940qpwprep-hero.glb",
    "tlc5940qpwprep-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}