Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLC5940QPWPREP

Texas Instruments · LED Drivers · TSSOP-28-EP

TLC5940QPWPREP from Texas Instruments, in a TSSOP-28-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground terminal of the device.
2 BLANK input Blanks all outputs: when BLANK is high all OUTn are forced off and the GS counter is reset, and when BLANK is low the OUTn are controlled by grayscale PWM.
3 XLAT input Level-triggered latch signal: when high the device writes data from the input shift register to the GS register (VPRG low) or DC register (VPRG high), and when low the GS or DC register data is held constant.
4 SCLK input Serial data shift clock, with a data shift clock frequency of up to 30 MHz.
5 SIN input Serial data input.
6 VPRG input Multifunction input: GND selects GS mode, VCC selects DC mode, and V(VPRG) allows DC register data to be programmed into the DC EEPROM when DCPRG is high (EEPROM data default 3Fh).
7 OUT0 output Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5).
8 OUT1 output Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5).
9 OUT2 output Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5).
10 OUT3 output Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5).
11 OUT4 output Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5).
12 OUT5 output Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5).
13 OUT6 output Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5).
14 OUT7 output Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5).
15 OUT8 output Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5).
16 OUT9 output Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5).
17 OUT10 output Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5).
18 OUT11 output Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5).
19 OUT12 output Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5).
20 OUT13 output Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5).
21 OUT14 output Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5).
22 OUT15 output Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5).
23 XERR output Open-drain error output that goes low when LOD (LED open detection) or TEF (thermal error flag) is detected.
24 SOUT output Serial data output.
25 GSCLK input Reference clock for grayscale PWM control, with a grayscale clock frequency of up to 30 MHz.
26 DCPRG input Switches the DC data input: DC is connected to the EEPROM when low and to the DC register when high, and it also controls EEPROM writing when VPRG = V(PRG) (EEPROM data default 3Fh).
27 IREF input Reference current terminal; a single external resistor sets the maximum current value of all 16 channels.
28 VCC power_in Power supply voltage, 3 V to 5.5 V recommended.
29 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-28-EP
Category Nixie Tube Driver/LED Driver
Pins 29

CAD (KiCad official)

  • Symbol: TLC5940QPWPREP
  • Footprint: Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm
  • 3D model: TSSOP-28-EP (KiCad packages3D, STEP)
  • 3D model files: tlc5940qpwprep-etched.step / tlc5940qpwprep-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlc5940qpwprep.step / tlc5940qpwprep.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 4188182915dbd635, retrieved 2026-10-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF