main
Ray
Publish 0.1.0
cd766e5
TLC5940QPWPREP
Texas Instruments · LED Drivers · TSSOP-28-EP
TLC5940QPWPREP from Texas Instruments, in a TSSOP-28-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground terminal of the device. |
| 2 | BLANK | input | Blanks all outputs: when BLANK is high all OUTn are forced off and the GS counter is reset, and when BLANK is low the OUTn are controlled by grayscale PWM. |
| 3 | XLAT | input | Level-triggered latch signal: when high the device writes data from the input shift register to the GS register (VPRG low) or DC register (VPRG high), and when low the GS or DC register data is held constant. |
| 4 | SCLK | input | Serial data shift clock, with a data shift clock frequency of up to 30 MHz. |
| 5 | SIN | input | Serial data input. |
| 6 | VPRG | input | Multifunction input: GND selects GS mode, VCC selects DC mode, and V(VPRG) allows DC register data to be programmed into the DC EEPROM when DCPRG is high (EEPROM data default 3Fh). |
| 7 | OUT0 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 8 | OUT1 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 9 | OUT2 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 10 | OUT3 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 11 | OUT4 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 12 | OUT5 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 13 | OUT6 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 14 | OUT7 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 15 | OUT8 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 16 | OUT9 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 17 | OUT10 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 18 | OUT11 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 19 | OUT12 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 20 | OUT13 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 21 | OUT14 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 22 | OUT15 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 23 | XERR | output | Open-drain error output that goes low when LOD (LED open detection) or TEF (thermal error flag) is detected. |
| 24 | SOUT | output | Serial data output. |
| 25 | GSCLK | input | Reference clock for grayscale PWM control, with a grayscale clock frequency of up to 30 MHz. |
| 26 | DCPRG | input | Switches the DC data input: DC is connected to the EEPROM when low and to the DC register when high, and it also controls EEPROM writing when VPRG = V(PRG) (EEPROM data default 3Fh). |
| 27 | IREF | input | Reference current terminal; a single external resistor sets the maximum current value of all 16 channels. |
| 28 | VCC | power_in | Power supply voltage, 3 V to 5.5 V recommended. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-28-EP |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 29 |
CAD (KiCad official)
- Symbol:
TLC5940QPWPREP - Footprint:
Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm - 3D model: TSSOP-28-EP (KiCad packages3D, STEP)
- 3D model files:
tlc5940qpwprep-etched.step/tlc5940qpwprep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc5940qpwprep.step/tlc5940qpwprep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
4188182915dbd635, retrieved 2026-10-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TLC5940QPWPREP
**Texas Instruments** · LED Drivers · TSSOP-28-EP
TLC5940QPWPREP from Texas Instruments, in a TSSOP-28-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground terminal of the device. |
| 2 | BLANK | input | Blanks all outputs: when BLANK is high all OUTn are forced off and the GS counter is reset, and when BLANK is low the OUTn are controlled by grayscale PWM. |
| 3 | XLAT | input | Level-triggered latch signal: when high the device writes data from the input shift register to the GS register (VPRG low) or DC register (VPRG high), and when low the GS or DC register data is held constant. |
| 4 | SCLK | input | Serial data shift clock, with a data shift clock frequency of up to 30 MHz. |
| 5 | SIN | input | Serial data input. |
| 6 | VPRG | input | Multifunction input: GND selects GS mode, VCC selects DC mode, and V(VPRG) allows DC register data to be programmed into the DC EEPROM when DCPRG is high (EEPROM data default 3Fh). |
| 7 | OUT0 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 8 | OUT1 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 9 | OUT2 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 10 | OUT3 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 11 | OUT4 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 12 | OUT5 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 13 | OUT6 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 14 | OUT7 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 15 | OUT8 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 16 | OUT9 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 17 | OUT10 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 18 | OUT11 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 19 | OUT12 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 20 | OUT13 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 21 | OUT14 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 22 | OUT15 | output | Constant-current sink output, rated 0 to 72 mA over -40°C to 125°C with outputs up to 17 V (limits from Recommended Operating Conditions, page 5). |
| 23 | XERR | output | Open-drain error output that goes low when LOD (LED open detection) or TEF (thermal error flag) is detected. |
| 24 | SOUT | output | Serial data output. |
| 25 | GSCLK | input | Reference clock for grayscale PWM control, with a grayscale clock frequency of up to 30 MHz. |
| 26 | DCPRG | input | Switches the DC data input: DC is connected to the EEPROM when low and to the DC register when high, and it also controls EEPROM writing when VPRG = V(PRG) (EEPROM data default 3Fh). |
| 27 | IREF | input | Reference current terminal; a single external resistor sets the maximum current value of all 16 channels. |
| 28 | VCC | power_in | Power supply voltage, 3 V to 5.5 V recommended. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-28-EP |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 29 |
## CAD (KiCad official)
- Symbol: `TLC5940QPWPREP`
- Footprint: `Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm`
- 3D model: TSSOP-28-EP (KiCad packages3D, STEP)
- 3D model files: `tlc5940qpwprep-etched.step` / `tlc5940qpwprep-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlc5940qpwprep.step` / `tlc5940qpwprep.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlc5940-ep) (33 pp, sha256 `4188182915dbd635`, retrieved 2026-10-10, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tlc5940qpwprep-datasheet.pdf)