main
Ray
Publish 0.1.0
754b3b6
TLC59401PWP
Texas Instruments · LED Drivers · HTSSOP-28-EP
TLC59401PWP from Texas Instruments, in a HTSSOP-28-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the device. |
| 2 | BLANK | input | When high, all OUTn outputs are forced off and the GS counter is reset; when low, the outputs are controlled by the grayscale PWM control. |
| 3 | XLAT | input | Level-triggered latch: when high, data is written from the input shift register to the GS register (MODE low) or DC register (MODE high), and when low the GS or DC data is held constant. |
| 4 | SCLK | input | Serial data shift clock; the device supports a 30-MHz data transfer rate, and the SCLK-to-SOUT propagation delay is specified at 30 ns maximum. |
| 5 | SIN | input | Serial data input to the input shift register, with logic levels referenced to VCC (inputs rated -0.3 V to VCC + 0.3 V). |
| 6 | MODE | input | Mode-change pin: GND selects grayscale (GS) mode and VCC selects dot-correction (DC) mode. |
| 7 | OUT0 | output | Constant-current sink output; outputs may be paralleled for more current, different voltages may be applied to each output, output voltage is rated up to 18 V, and output current is 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V). |
| 8 | OUT1 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 9 | OUT2 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 10 | OUT3 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 11 | OUT4 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 12 | OUT5 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 13 | OUT6 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 14 | OUT7 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 15 | OUT8 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 16 | OUT9 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 17 | OUT10 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 18 | OUT11 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 19 | OUT12 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 20 | OUT13 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 21 | OUT14 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 22 | OUT15 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 23 | XERR | output | Open-drain error output that goes low when an LED open (LOD) or over-temperature (TEF) condition is detected. |
| 24 | SOUT | output | Serial data output for cascading devices, with a rise/fall time of 16 ns (typical) into a 15 pF load and a propagation delay from SCLK of 30 ns maximum. |
| 25 | GSCLK | input | Reference clock for grayscale PWM control. |
| 26 | TEST | input | Test pin that must be connected to VCC. |
| 27 | IREF | bidirectional | Reference current terminal: a resistor from IREF to GND sets the maximum current for OUT0 to OUT15, and no capacitor is required between IREF and GND. |
| 28 | VCC | power_in | Power supply, 3.0 V to 5.5 V per the recommended operating range, with absolute maximum rating of -0.3 V to 6 V. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-28-EP |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 29 |
CAD (KiCad official)
- Symbol:
TLC59401PWP - Footprint:
Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm - 3D model: HTSSOP-28-EP (KiCad packages3D, STEP)
- 3D model files:
tlc59401pwp-etched.step/tlc59401pwp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc59401pwp.step/tlc59401pwp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
7d618d9c5c5bd636, retrieved 2026-10-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TLC59401PWP
**Texas Instruments** · LED Drivers · HTSSOP-28-EP
TLC59401PWP from Texas Instruments, in a HTSSOP-28-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the device. |
| 2 | BLANK | input | When high, all OUTn outputs are forced off and the GS counter is reset; when low, the outputs are controlled by the grayscale PWM control. |
| 3 | XLAT | input | Level-triggered latch: when high, data is written from the input shift register to the GS register (MODE low) or DC register (MODE high), and when low the GS or DC data is held constant. |
| 4 | SCLK | input | Serial data shift clock; the device supports a 30-MHz data transfer rate, and the SCLK-to-SOUT propagation delay is specified at 30 ns maximum. |
| 5 | SIN | input | Serial data input to the input shift register, with logic levels referenced to VCC (inputs rated -0.3 V to VCC + 0.3 V). |
| 6 | MODE | input | Mode-change pin: GND selects grayscale (GS) mode and VCC selects dot-correction (DC) mode. |
| 7 | OUT0 | output | Constant-current sink output; outputs may be paralleled for more current, different voltages may be applied to each output, output voltage is rated up to 18 V, and output current is 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V). |
| 8 | OUT1 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 9 | OUT2 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 10 | OUT3 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 11 | OUT4 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 12 | OUT5 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 13 | OUT6 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 14 | OUT7 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 15 | OUT8 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 16 | OUT9 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 17 | OUT10 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 18 | OUT11 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 19 | OUT12 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 20 | OUT13 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 21 | OUT14 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 22 | OUT15 | output | Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range. |
| 23 | XERR | output | Open-drain error output that goes low when an LED open (LOD) or over-temperature (TEF) condition is detected. |
| 24 | SOUT | output | Serial data output for cascading devices, with a rise/fall time of 16 ns (typical) into a 15 pF load and a propagation delay from SCLK of 30 ns maximum. |
| 25 | GSCLK | input | Reference clock for grayscale PWM control. |
| 26 | TEST | input | Test pin that must be connected to VCC. |
| 27 | IREF | bidirectional | Reference current terminal: a resistor from IREF to GND sets the maximum current for OUT0 to OUT15, and no capacitor is required between IREF and GND. |
| 28 | VCC | power_in | Power supply, 3.0 V to 5.5 V per the recommended operating range, with absolute maximum rating of -0.3 V to 6 V. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-28-EP |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 29 |
## CAD (KiCad official)
- Symbol: `TLC59401PWP`
- Footprint: `Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm`
- 3D model: HTSSOP-28-EP (KiCad packages3D, STEP)
- 3D model files: `tlc59401pwp-etched.step` / `tlc59401pwp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlc59401pwp.step` / `tlc59401pwp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlc59401) (33 pp, sha256 `7d618d9c5c5bd636`, retrieved 2026-10-10, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tlc59401pwp-datasheet.pdf)