main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tlc59401pwp: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tlc59401pwp-etched.glb tlc59401pwp: factory component page (tier=lcsc) · Ray
tlc59401pwp-etched.step tlc59401pwp: factory component page (tier=lcsc) · Ray
tlc59401pwp-hero.glb tlc59401pwp: hero GLB from the etched model (keeps the MPN mark) · Ray
tlc59401pwp-hero.overlay.json Publish 0.1.0 · Ray
tlc59401pwp.glb Publish 0.1.0 · Ray
tlc59401pwp.kicad_mod Publish 0.1.0 · Ray
tlc59401pwp.kicad_sym Publish 0.1.0 · Ray
tlc59401pwp.lbr Publish 0.1.0 · Ray
tlc59401pwp.step Publish 0.1.0 · Ray

TLC59401PWP

Texas Instruments · LED Drivers · HTSSOP-28-EP

TLC59401PWP from Texas Instruments, in a HTSSOP-28-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground reference for the device.
2 BLANK input When high, all OUTn outputs are forced off and the GS counter is reset; when low, the outputs are controlled by the grayscale PWM control.
3 XLAT input Level-triggered latch: when high, data is written from the input shift register to the GS register (MODE low) or DC register (MODE high), and when low the GS or DC data is held constant.
4 SCLK input Serial data shift clock; the device supports a 30-MHz data transfer rate, and the SCLK-to-SOUT propagation delay is specified at 30 ns maximum.
5 SIN input Serial data input to the input shift register, with logic levels referenced to VCC (inputs rated -0.3 V to VCC + 0.3 V).
6 MODE input Mode-change pin: GND selects grayscale (GS) mode and VCC selects dot-correction (DC) mode.
7 OUT0 output Constant-current sink output; outputs may be paralleled for more current, different voltages may be applied to each output, output voltage is rated up to 18 V, and output current is 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V).
8 OUT1 output Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range.
9 OUT2 output Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range.
10 OUT3 output Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range.
11 OUT4 output Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range.
12 OUT5 output Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range.
13 OUT6 output Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range.
14 OUT7 output Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range.
15 OUT8 output Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range.
16 OUT9 output Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range.
17 OUT10 output Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range.
18 OUT11 output Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range.
19 OUT12 output Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range.
20 OUT13 output Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range.
21 OUT14 output Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range.
22 OUT15 output Constant-current sink output rated up to 18 V with 0 to 80 mA (VCC ≤ 3.6 V) or 0 to 120 mA (VCC > 3.6 V) current range.
23 XERR output Open-drain error output that goes low when an LED open (LOD) or over-temperature (TEF) condition is detected.
24 SOUT output Serial data output for cascading devices, with a rise/fall time of 16 ns (typical) into a 15 pF load and a propagation delay from SCLK of 30 ns maximum.
25 GSCLK input Reference clock for grayscale PWM control.
26 TEST input Test pin that must be connected to VCC.
27 IREF bidirectional Reference current terminal: a resistor from IREF to GND sets the maximum current for OUT0 to OUT15, and no capacitor is required between IREF and GND.
28 VCC power_in Power supply, 3.0 V to 5.5 V per the recommended operating range, with absolute maximum rating of -0.3 V to 6 V.
29 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-28-EP
Category Nixie Tube Driver/LED Driver
Pins 29

CAD (KiCad official)

  • Symbol: TLC59401PWP
  • Footprint: Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm
  • 3D model: HTSSOP-28-EP (KiCad packages3D, STEP)
  • 3D model files: tlc59401pwp-etched.step / tlc59401pwp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlc59401pwp.step / tlc59401pwp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 7d618d9c5c5bd636, retrieved 2026-10-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF