main
History Download
Ray Publish 0.1.0 7f0d01c

TLC5925IPWR

Texas Instruments · LED Drivers · TSSOP-24

TLC5925IPWR from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground for control logic and current sink.
2 SDI input Serial-data input to the shift register.
3 CLK input Clock input for data shift on rising edge; max clock frequency 30 MHz in cascade operation.
4 LE input Data strobe input: serial data is transferred to the respective latch when LE is high and latched when LE goes low; has an internal pull-down resistor.
5 OUT0 passive Constant-current sink output 0, 3 mA to 45 mA set by Rext, up to 17 V at the output.
6 OUT1 passive Constant-current sink output 1, 3 mA to 45 mA set by Rext, up to 17 V at the output.
7 OUT2 passive Constant-current sink output 2, 3 mA to 45 mA set by Rext, up to 17 V at the output.
8 OUT3 passive Constant-current sink output 3, 3 mA to 45 mA set by Rext, up to 17 V at the output.
9 OUT4 passive Constant-current sink output 4, 3 mA to 45 mA set by Rext, up to 17 V at the output.
10 OUT5 passive Constant-current sink output 5, 3 mA to 45 mA set by Rext, up to 17 V at the output.
11 OUT6 passive Constant-current sink output 6, 3 mA to 45 mA set by Rext, up to 17 V at the output.
12 OUT7 passive Constant-current sink output 7, 3 mA to 45 mA set by Rext, up to 17 V at the output.
13 OUT8 passive Constant-current sink output 8, 3 mA to 45 mA set by Rext, up to 17 V at the output.
14 OUT9 passive Constant-current sink output 9, 3 mA to 45 mA set by Rext, up to 17 V at the output.
15 OUT10 passive Constant-current sink output 10, 3 mA to 45 mA set by Rext, up to 17 V at the output.
16 OUT11 passive Constant-current sink output 11, 3 mA to 45 mA set by Rext, up to 17 V at the output.
17 OUT12 passive Constant-current sink output 12, 3 mA to 45 mA set by Rext, up to 17 V at the output.
18 OUT13 passive Constant-current sink output 13, 3 mA to 45 mA set by Rext, up to 17 V at the output.
19 OUT14 passive Constant-current sink output 14, 3 mA to 45 mA set by Rext, up to 17 V at the output.
20 OUT15 passive Constant-current sink output 15, 3 mA to 45 mA set by Rext, up to 17 V at the output.
21 OE input Output enable: outputs are enabled when low and all drivers are turned off (blanked) when high; has an internal pullup resistor.
22 SDO output Serial-data output to the SDI of the next driver IC or to the microcontroller; rated for 1 mA source/sink.
23 R-EXT passive Connect an external resistor Rext to GND to set output currents, IOUT = (1.21 V / Rext) × 18.
24 VDD power_in Supply voltage, 3 V to 5.5 V recommended operating range.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-24
Category Display Modules / LED Drivers / Display Drivers
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 0 7 V 4
Input voltage VI -0.4 0.4 V max is VDD + 0.4 V 4
Output voltage VO -0.5 20 V 4
Output current IOUT 45 mA 4
GND terminal current IGND 750 mA 4
Free-air operating temperature range TA -40 125 °C 4
Operating junction temperature range TJ -40 150 °C 4
Storage temperature range Tstg -55 150 °C 4
ESD HBM V(ESD) -1000 1000 V Human body model, ANSI/ESDA/JEDEC JS-001 4
ESD CDM V(ESD) -500 500 V Charged-device model, JESD22-C101 4
Supply voltage VDD 3 5.5 V 4
Output voltage OUT0 to OUT15 VO 17 V 4
Output current IO 3 45 mA DC test circuit; 3 mA at VO ≥ 0.6 V, 45 mA at VO ≥ 1 V 4
High-level output current SDO IOH -1 mA 4
Low-level output current SDO IOL 1 mA 4
High-level input voltage VIH 0.7 1 V CLK, OE, LE, SDI; min 0.7 × VDD, max VDD (values are multipliers of VDD) 4
Low-level input voltage VIL 0 0.3 V CLK, OE, LE, SDI; min GND, max 0.3 × VDD (max is multiplier of VDD) 4
Rise time CLK tR 500 ns 4
Fall time CLK tF 500 ns 4
Junction-to-ambient thermal resistance, 1-layer RθJA 118.8 °C/W PW (TSSOP) 24 pins, JEDEC 1-layer board (JESD 51-3), no airflow 5
Junction-to-ambient thermal resistance, 4-layer RθJA 87.9 °C/W PW (TSSOP) 24 pins, JEDEC 4-layer board (JESD 51-7), no airflow 5
Junction-to-case (top) thermal resistance RθJC(top) 44.9 °C/W PW (TSSOP) 5
Junction-to-board thermal resistance RθJB 52.9 °C/W PW (TSSOP) 5
Junction-to-top characterization parameter ψJT 6.7 °C/W PW (TSSOP) 5
Junction-to-board characterization parameter ψJB 52.5 °C/W PW (TSSOP) 5
Power dissipation PW package PD 1.1 W JEDEC 4-layer board (JESD 51-7), no airflow, TA = 25°C, TJ = 125°C 6
Input voltage VDD 3 5.5 V VDD = 3 V table 5
Output voltage VO 17 V VDD = 3 V table 5
Output current IO 3 45 mA VDD = 3 V; 3 mA at VO ≥ 0.6 V, 45 mA at VO ≥ 1 V 5
High-level output current, source IOH -1 mA VDD = 3 V 5
Low-level output current, sink IOL 1 mA VDD = 3 V 5
High-level input voltage VIH 0.7 1 V VDD = 3 V; 0.7 × VDD to VDD (multipliers of VDD) 5
Low-level input voltage VIL 0 0.3 V VDD = 3 V; GND to 0.3 × VDD (max multiplier of VDD) 5
Output leakage current Ileak 0.5 μA VDD = 3 V, VOH = 17 V, TJ = 25°C 5
Output leakage current Ileak 2 μA VDD = 3 V, VOH = 17 V, TJ = 125°C 5
High-level output voltage VOH -0.4 V VDD = 3 V, SDO, IOL = -1 mA; min is VDD, 0.4 V (offset from VDD) 5
Low-level output voltage VOL 0.4 V VDD = 3 V, SDO, IOH = 1 mA 5
Output current 1 error, die-die IO(1) -6 3 6 % VDD = 3 V, IOL = 13 mA, VO = 0.6 V, Rext = 1680 Ω, TJ = 25°C; typ printed ±3% 5
Output current 1 error, channel-to-channel IO(1) -4 1.5 4 % VDD = 3 V, IOL = 13 mA, VO = 0.6 V, Rext = 1680 Ω, TJ = 25°C; typ printed ±1.5% 5
Output current 2 error, die-die IO(2) -6 3 6 % VDD = 3 V, IOL = 26 mA, VO = 0.8 V, Rext = 840 Ω, TJ = 25°C; typ printed ±3% 5
Output current 2 error, channel-to-channel IO(2) -4 1.5 4 % VDD = 3 V, IOL = 26 mA, VO = 0.8 V, Rext = 840 Ω, TJ = 25°C; typ printed ±1.5% 5
Output current vs output voltage regulation (VO) ΔIOUT/ΔVOUT 0.1 %/V VDD = 3 V, VO = 1 V to 3 V, IO = 13 mA; typ printed ±0.1 5
Output current vs supply voltage regulation 1 %/V VDD = 3.0 V to 5.5 V, IO = 13 mA to 45 mA; typ printed ±1 5
Overtemperature shutdown Tsd 150 175 200 °C VDD = 3 V; specified by design 5
Supply current, Rext = Open IDD 7 10 mA VDD = 3 V, Rext = Open 5
Supply current, Rext = 1680 Ω IDD 9 12 mA VDD = 3 V, Rext = 1680 Ω 5
Supply current, Rext = 840 Ω IDD 11 13 mA VDD = 3 V, Rext = 840 Ω 5
Output leakage current Ileak 0.5 μA VDD = 5.5 V, VOH = 17 V, TJ = 25°C 6
Output leakage current Ileak 2 μA VDD = 5.5 V, VOH = 17 V, TJ = 125°C 6
Output current 1 error, die-die IO(1) -6 3 6 % VDD = 5.5 V, IOL = 13 mA, VO = 0.6 V, Rext = 1680 Ω, TJ = 25°C; typ printed ±3% 6
Output current 1 error, channel-to-channel IO(1) -4 1.5 4 % VDD = 5.5 V, IOL = 13 mA, VO = 0.6 V, Rext = 1680 Ω, TJ = 25°C; typ printed ±1.5% 6
Output current 2 error, die-die IO(2) -6 3 6 % VDD = 5.5 V, IOL = 26 mA, VO = 0.8 V, Rext = 840 Ω, TJ = 25°C; typ printed ±3% 6
Output current 2 error, channel-to-channel IO(2) -4 1.5 4 % VDD = 5.5 V, IOL = 26 mA, VO = 0.8 V, Rext = 840 Ω, TJ = 25°C; typ printed ±1.5% 6
Supply current, Rext = Open IDD 9 11 mA VDD = 5.5 V, Rext = Open 6
Supply current, Rext = 1680 Ω IDD 12 14 mA VDD = 5.5 V, Rext = 1680 Ω 6
Supply current, Rext = 840 Ω IDD 14 16 mA VDD = 5.5 V, Rext = 840 Ω 6
Propagation delay CLK to OUTn, low-to-high tPLH1 30 45 60 ns VDD = 3 V 7
Propagation delay CLK to OUTn, high-to-low tPHL1 40 65 100 ns VDD = 3 V 7
Propagation delay CLK to OUTn, low-to-high tPLH1 20 35 55 ns VDD = 5.5 V 8
Propagation delay CLK to OUTn, high-to-low tPHL1 15 28 42 ns VDD = 5.5 V 8
Clock frequency, cascade operation fCLK 30 MHz VDD = 3 V to 5.5 V 7

CAD (KiCad official)

  • Symbol: TLC5925IPWR
  • Footprint: Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm
  • 3D model: TSSOP-24 (KiCad packages3D, STEP)
  • 3D model files: tlc5925ipwr-etched.step / tlc5925ipwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlc5925ipwr.step / tlc5925ipwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 54e6daa4fa13027e, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF