3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLC5925IPWR
Texas Instruments · LED Drivers · TSSOP-24
TLC5925IPWR from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground for control logic and current sink. |
| 2 | SDI | input | Serial-data input to the shift register. |
| 3 | CLK | input | Clock input for data shift on rising edge; max clock frequency 30 MHz in cascade operation. |
| 4 | LE | input | Data strobe input: serial data is transferred to the respective latch when LE is high and latched when LE goes low; has an internal pull-down resistor. |
| 5 | OUT0 | passive | Constant-current sink output 0, 3 mA to 45 mA set by Rext, up to 17 V at the output. |
| 6 | OUT1 | passive | Constant-current sink output 1, 3 mA to 45 mA set by Rext, up to 17 V at the output. |
| 7 | OUT2 | passive | Constant-current sink output 2, 3 mA to 45 mA set by Rext, up to 17 V at the output. |
| 8 | OUT3 | passive | Constant-current sink output 3, 3 mA to 45 mA set by Rext, up to 17 V at the output. |
| 9 | OUT4 | passive | Constant-current sink output 4, 3 mA to 45 mA set by Rext, up to 17 V at the output. |
| 10 | OUT5 | passive | Constant-current sink output 5, 3 mA to 45 mA set by Rext, up to 17 V at the output. |
| 11 | OUT6 | passive | Constant-current sink output 6, 3 mA to 45 mA set by Rext, up to 17 V at the output. |
| 12 | OUT7 | passive | Constant-current sink output 7, 3 mA to 45 mA set by Rext, up to 17 V at the output. |
| 13 | OUT8 | passive | Constant-current sink output 8, 3 mA to 45 mA set by Rext, up to 17 V at the output. |
| 14 | OUT9 | passive | Constant-current sink output 9, 3 mA to 45 mA set by Rext, up to 17 V at the output. |
| 15 | OUT10 | passive | Constant-current sink output 10, 3 mA to 45 mA set by Rext, up to 17 V at the output. |
| 16 | OUT11 | passive | Constant-current sink output 11, 3 mA to 45 mA set by Rext, up to 17 V at the output. |
| 17 | OUT12 | passive | Constant-current sink output 12, 3 mA to 45 mA set by Rext, up to 17 V at the output. |
| 18 | OUT13 | passive | Constant-current sink output 13, 3 mA to 45 mA set by Rext, up to 17 V at the output. |
| 19 | OUT14 | passive | Constant-current sink output 14, 3 mA to 45 mA set by Rext, up to 17 V at the output. |
| 20 | OUT15 | passive | Constant-current sink output 15, 3 mA to 45 mA set by Rext, up to 17 V at the output. |
| 21 | OE | input | Output enable: outputs are enabled when low and all drivers are turned off (blanked) when high; has an internal pullup resistor. |
| 22 | SDO | output | Serial-data output to the SDI of the next driver IC or to the microcontroller; rated for 1 mA source/sink. |
| 23 | R-EXT | passive | Connect an external resistor Rext to GND to set output currents, IOUT = (1.21 V / Rext) × 18. |
| 24 | VDD | power_in | Supply voltage, 3 V to 5.5 V recommended operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-24 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 0 | 7 | V | 4 | ||
| Input voltage | VI | -0.4 | 0.4 | V | max is VDD + 0.4 V | 4 | |
| Output voltage | VO | -0.5 | 20 | V | 4 | ||
| Output current | IOUT | 45 | mA | 4 | |||
| GND terminal current | IGND | 750 | mA | 4 | |||
| Free-air operating temperature range | TA | -40 | 125 | °C | 4 | ||
| Operating junction temperature range | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature range | Tstg | -55 | 150 | °C | 4 | ||
| ESD HBM | V(ESD) | -1000 | 1000 | V | Human body model, ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD CDM | V(ESD) | -500 | 500 | V | Charged-device model, JESD22-C101 | 4 | |
| Supply voltage | VDD | 3 | 5.5 | V | 4 | ||
| Output voltage OUT0 to OUT15 | VO | 17 | V | 4 | |||
| Output current | IO | 3 | 45 | mA | DC test circuit; 3 mA at VO ≥ 0.6 V, 45 mA at VO ≥ 1 V | 4 | |
| High-level output current SDO | IOH | -1 | mA | 4 | |||
| Low-level output current SDO | IOL | 1 | mA | 4 | |||
| High-level input voltage | VIH | 0.7 | 1 | V | CLK, OE, LE, SDI; min 0.7 × VDD, max VDD (values are multipliers of VDD) | 4 | |
| Low-level input voltage | VIL | 0 | 0.3 | V | CLK, OE, LE, SDI; min GND, max 0.3 × VDD (max is multiplier of VDD) | 4 | |
| Rise time CLK | tR | 500 | ns | 4 | |||
| Fall time CLK | tF | 500 | ns | 4 | |||
| Junction-to-ambient thermal resistance, 1-layer | RθJA | 118.8 | °C/W | PW (TSSOP) 24 pins, JEDEC 1-layer board (JESD 51-3), no airflow | 5 | ||
| Junction-to-ambient thermal resistance, 4-layer | RθJA | 87.9 | °C/W | PW (TSSOP) 24 pins, JEDEC 4-layer board (JESD 51-7), no airflow | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 44.9 | °C/W | PW (TSSOP) | 5 | ||
| Junction-to-board thermal resistance | RθJB | 52.9 | °C/W | PW (TSSOP) | 5 | ||
| Junction-to-top characterization parameter | ψJT | 6.7 | °C/W | PW (TSSOP) | 5 | ||
| Junction-to-board characterization parameter | ψJB | 52.5 | °C/W | PW (TSSOP) | 5 | ||
| Power dissipation PW package | PD | 1.1 | W | JEDEC 4-layer board (JESD 51-7), no airflow, TA = 25°C, TJ = 125°C | 6 | ||
| Input voltage | VDD | 3 | 5.5 | V | VDD = 3 V table | 5 | |
| Output voltage | VO | 17 | V | VDD = 3 V table | 5 | ||
| Output current | IO | 3 | 45 | mA | VDD = 3 V; 3 mA at VO ≥ 0.6 V, 45 mA at VO ≥ 1 V | 5 | |
| High-level output current, source | IOH | -1 | mA | VDD = 3 V | 5 | ||
| Low-level output current, sink | IOL | 1 | mA | VDD = 3 V | 5 | ||
| High-level input voltage | VIH | 0.7 | 1 | V | VDD = 3 V; 0.7 × VDD to VDD (multipliers of VDD) | 5 | |
| Low-level input voltage | VIL | 0 | 0.3 | V | VDD = 3 V; GND to 0.3 × VDD (max multiplier of VDD) | 5 | |
| Output leakage current | Ileak | 0.5 | μA | VDD = 3 V, VOH = 17 V, TJ = 25°C | 5 | ||
| Output leakage current | Ileak | 2 | μA | VDD = 3 V, VOH = 17 V, TJ = 125°C | 5 | ||
| High-level output voltage | VOH | -0.4 | V | VDD = 3 V, SDO, IOL = -1 mA; min is VDD, 0.4 V (offset from VDD) | 5 | ||
| Low-level output voltage | VOL | 0.4 | V | VDD = 3 V, SDO, IOH = 1 mA | 5 | ||
| Output current 1 error, die-die | IO(1) | -6 | 3 | 6 | % | VDD = 3 V, IOL = 13 mA, VO = 0.6 V, Rext = 1680 Ω, TJ = 25°C; typ printed ±3% | 5 |
| Output current 1 error, channel-to-channel | IO(1) | -4 | 1.5 | 4 | % | VDD = 3 V, IOL = 13 mA, VO = 0.6 V, Rext = 1680 Ω, TJ = 25°C; typ printed ±1.5% | 5 |
| Output current 2 error, die-die | IO(2) | -6 | 3 | 6 | % | VDD = 3 V, IOL = 26 mA, VO = 0.8 V, Rext = 840 Ω, TJ = 25°C; typ printed ±3% | 5 |
| Output current 2 error, channel-to-channel | IO(2) | -4 | 1.5 | 4 | % | VDD = 3 V, IOL = 26 mA, VO = 0.8 V, Rext = 840 Ω, TJ = 25°C; typ printed ±1.5% | 5 |
| Output current vs output voltage regulation (VO) | ΔIOUT/ΔVOUT | 0.1 | %/V | VDD = 3 V, VO = 1 V to 3 V, IO = 13 mA; typ printed ±0.1 | 5 | ||
| Output current vs supply voltage regulation | 1 | %/V | VDD = 3.0 V to 5.5 V, IO = 13 mA to 45 mA; typ printed ±1 | 5 | |||
| Overtemperature shutdown | Tsd | 150 | 175 | 200 | °C | VDD = 3 V; specified by design | 5 |
| Supply current, Rext = Open | IDD | 7 | 10 | mA | VDD = 3 V, Rext = Open | 5 | |
| Supply current, Rext = 1680 Ω | IDD | 9 | 12 | mA | VDD = 3 V, Rext = 1680 Ω | 5 | |
| Supply current, Rext = 840 Ω | IDD | 11 | 13 | mA | VDD = 3 V, Rext = 840 Ω | 5 | |
| Output leakage current | Ileak | 0.5 | μA | VDD = 5.5 V, VOH = 17 V, TJ = 25°C | 6 | ||
| Output leakage current | Ileak | 2 | μA | VDD = 5.5 V, VOH = 17 V, TJ = 125°C | 6 | ||
| Output current 1 error, die-die | IO(1) | -6 | 3 | 6 | % | VDD = 5.5 V, IOL = 13 mA, VO = 0.6 V, Rext = 1680 Ω, TJ = 25°C; typ printed ±3% | 6 |
| Output current 1 error, channel-to-channel | IO(1) | -4 | 1.5 | 4 | % | VDD = 5.5 V, IOL = 13 mA, VO = 0.6 V, Rext = 1680 Ω, TJ = 25°C; typ printed ±1.5% | 6 |
| Output current 2 error, die-die | IO(2) | -6 | 3 | 6 | % | VDD = 5.5 V, IOL = 26 mA, VO = 0.8 V, Rext = 840 Ω, TJ = 25°C; typ printed ±3% | 6 |
| Output current 2 error, channel-to-channel | IO(2) | -4 | 1.5 | 4 | % | VDD = 5.5 V, IOL = 26 mA, VO = 0.8 V, Rext = 840 Ω, TJ = 25°C; typ printed ±1.5% | 6 |
| Supply current, Rext = Open | IDD | 9 | 11 | mA | VDD = 5.5 V, Rext = Open | 6 | |
| Supply current, Rext = 1680 Ω | IDD | 12 | 14 | mA | VDD = 5.5 V, Rext = 1680 Ω | 6 | |
| Supply current, Rext = 840 Ω | IDD | 14 | 16 | mA | VDD = 5.5 V, Rext = 840 Ω | 6 | |
| Propagation delay CLK to OUTn, low-to-high | tPLH1 | 30 | 45 | 60 | ns | VDD = 3 V | 7 |
| Propagation delay CLK to OUTn, high-to-low | tPHL1 | 40 | 65 | 100 | ns | VDD = 3 V | 7 |
| Propagation delay CLK to OUTn, low-to-high | tPLH1 | 20 | 35 | 55 | ns | VDD = 5.5 V | 8 |
| Propagation delay CLK to OUTn, high-to-low | tPHL1 | 15 | 28 | 42 | ns | VDD = 5.5 V | 8 |
| Clock frequency, cascade operation | fCLK | 30 | MHz | VDD = 3 V to 5.5 V | 7 |
CAD (KiCad official)
- Symbol:
TLC5925IPWR - Footprint:
Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm - 3D model: TSSOP-24 (KiCad packages3D, STEP)
- 3D model files:
tlc5925ipwr-etched.step/tlc5925ipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc5925ipwr.step/tlc5925ipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
54e6daa4fa13027e, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).