main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tlc5917idr: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
tlc5917idr-etched.glb Publish 0.1.0 · Ray
tlc5917idr-etched.step tlc5917idr: factory component page (tier=mfr) · Ray
tlc5917idr-hero.glb tlc5917idr: hero GLB from the etched model (keeps the MPN mark) · Ray
tlc5917idr-hero.overlay.json Publish 0.1.0 · Ray
tlc5917idr.glb Publish 0.1.0 · Ray
tlc5917idr.kicad_mod Publish 0.1.0 · Ray
tlc5917idr.kicad_sym Publish 0.1.0 · Ray
tlc5917idr.lbr Publish 0.1.0 · Ray
tlc5917idr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 16 pins · Ray

TLC5917IDR

Texas Instruments · LED Drivers · SOIC-16

TLC5917IDR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground for control logic and current sink.
2 SDI input Serial-data input to the shift register.
3 CLK input Clock input for data shift on rising edge.
4 LE(ED1) input Data strobe input: serial data is transferred to the latch when high and latched when it goes low; also a control input for Error Detection Mode and Current Adjust Mode, with an internal pulldown.
5 OUT0 output Constant-current sink output 0, 3 mA to 120 mA set by the external resistor.
6 OUT1 output Constant-current sink output 1, 3 mA to 120 mA set by the external resistor.
7 OUT2 output Constant-current sink output 2, 3 mA to 120 mA set by the external resistor.
8 OUT3 output Constant-current sink output 3, 3 mA to 120 mA set by the external resistor.
9 OUT4 output Constant-current sink output 4, 3 mA to 120 mA set by the external resistor.
10 OUT5 output Constant-current sink output 5, 3 mA to 120 mA set by the external resistor.
11 OUT6 output Constant-current sink output 6, 3 mA to 120 mA set by the external resistor.
12 OUT7 output Constant-current sink output 7, 3 mA to 120 mA set by the external resistor.
13 OE(ED2) input Output enable: outputs are enabled when low and all turned off (blanked) when high; also a control input for Error Detection Mode and Current Adjust Mode, with an internal pullup.
14 SDO output Serial-data output to the SDI of the next driver IC or to the microcontroller.
15 R-EXT input External resistor connected to ground sets the current for all outputs.
16 VDD power_in Supply voltage, 3 V to 5.5 V recommended (7 V absolute maximum).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16
Category Nixie Tube Driver/LED Driver
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 0 7 V 4
Output voltage VO -0.5 20 V 4
Clock frequency fclk 25 MHz 4
Output current IOUT 120 mA 4
GND terminal current IGND 960 mA 4
Operating free-air temperature TA -40 125 °C 4
Operating junction temperature TJ -40 150 °C 4
Storage temperature Tstg -55 150 °C 4
ESD HBM V(ESD) -1500 1500 V Human-body model, ANSI/ESDA/JEDEC JS-001 4
ESD CDM V(ESD) -500 500 V Charged-device model, JESD22-C101 4
Supply voltage VDD 3 5.5 V 4
Supply voltage to output pins VO 20 V OUT0-OUT7 4
Output current IO 3 mA VO ≥ 0.6 V, DC test circuit 4
Output current IO 120 mA VO ≥ 1 V, DC test circuit 4
High-level output current source IOH -1 mA SDO shorted to GND 4
Low-level output current sink IOL 1 mA SDO shorted to VCC 4
Output leakage current Ileak 0.5 μA VOH = 17 V, TJ = 25°C, VDD = 3 V 5
Output leakage current Ileak 2 μA VOH = 17 V, TJ = 125°C, VDD = 3 V 5
Low-level output voltage VOL 0.4 V SDO, IOH = 1 mA 5
Output current error, die-die IO(1) -6 3 6 % IOL = 26 mA, VO = 0.6 V, Rext = 720 Ω, TJ = 25°C 5
Output current skew, channel-to-channel IO(1) -3 1.5 3 % IOL = 26 mA, VO = 0.6 V, Rext = 720 Ω, TJ = 25°C 5
Output current error, die-die IO(2) -6 2 6 % IOL = 52 mA, VO = 0.8 V, Rext = 360 Ω, TJ = 25°C 5
Overtemperature shutdown Tsd 150 175 200 °C Specified by design 5
Trigger threshold voltage for short-error detection VOUT,TTh 2.5 2.7 3.1 V IOUT,target = 3 mA to 120 mA (TLC5917 only) 5
Supply current IDD 5 10 mA VDD = 3 V, Rext = Open 5
Supply current IDD 8 14 mA VDD = 3 V, Rext = 720 Ω 5
Supply current IDD 11 18 mA VDD = 3 V, Rext = 360 Ω 5
Supply current IDD 16 22 mA VDD = 3 V, Rext = 180 Ω 5
Supply current IDD 6 10 mA VDD = 5.5 V, Rext = Open 6
Supply current IDD 11 14 mA VDD = 5.5 V, Rext = 720 Ω 6
Supply current IDD 13 18 mA VDD = 5.5 V, Rext = 360 Ω 6
Supply current IDD 19 24 mA VDD = 5.5 V, Rext = 180 Ω 6
Propagation delay CLK to OUTn, low-to-high tPLH1 40 65 95 ns VDD = 3 V 7
Propagation delay CLK to OUTn, high-to-low tPHL1 300 365 ns VDD = 3 V 7
Propagation delay CLK to SDO, low-to-high tPLH4 12 20 30 ns VDD = 3 V 7
LE(ED1) pulse duration tw(L) 20 ns Normal Mode 9
CLK pulse duration tw(CLK) 20 ns Normal Mode 9
OE(ED2) pulse duration tw(OE) 500 ns Normal Mode, IOUT < 60 mA 9
OE(ED2) pulse duration tw(OE) 700 ns Normal Mode, IOUT > 60 mA 9
Setup time for SDI tsu(D) 3 ns Normal Mode 9
Hold time for SDI th(D) 2 ns Normal Mode 9
Setup time for LE(ED1) tsu(L) 15 ns Normal Mode 9
Hold time for LE(ED1) th(L) 15 ns Normal Mode 9
OE(ED2) pulse duration tw(ED2) 2000 ns Error Detection Mode 9
Setup time for LE(ED1) tsu(ED1) 4 ns Error Detection Mode 9
Hold time for LE(ED1) th(ED1) 10 ns Error Detection Mode 9
Setup time for OE(ED2) tsu(ED2) 6 ns Error Detection Mode 9
Hold time for OE(ED2) th(ED2) 10 ns Error Detection Mode 9
Clock frequency fCLK 30 MHz Cascade operation 9
Junction-to-ambient thermal resistance RθJA 87.4 °C/W D package, 16 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 48.1 °C/W D package, 16 pins 4
Junction-to-board thermal resistance RθJB 44.4 °C/W D package, 16 pins 4
Junction-to-top characterization parameter ψJT 12.5 °C/W D package, 16 pins 4
Junction-to-board characterization parameter ψJB 44.2 °C/W D package, 16 pins 4
Output current 1 IO(1) 26 mA VOUT = 0.6 V, Rext = 720 Ω, CG = 0.992 5
Output current 2 IO(2) 52 mA VO = 0.8 V, Rext = 360 Ω, CG = 0.992 5
Restart temperature hysteresis Thys 15 °C Specified by design 5
Pullup resistance OE(ED2) 500 kΩ 5
Pulldown resistance LE(ED1) 500 kΩ 5

CAD (KiCad official)

  • Symbol: TLC5917IDR
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: tlc5917idr-etched.step / tlc5917idr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlc5917idr.step / tlc5917idr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 f257e916f7b5d37b, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF