3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLC5917IDR
Texas Instruments · LED Drivers · SOIC-16
TLC5917IDR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground for control logic and current sink. |
| 2 | SDI | input | Serial-data input to the shift register. |
| 3 | CLK | input | Clock input for data shift on rising edge. |
| 4 | LE(ED1) | input | Data strobe input: serial data is transferred to the latch when high and latched when it goes low; also a control input for Error Detection Mode and Current Adjust Mode, with an internal pulldown. |
| 5 | OUT0 | output | Constant-current sink output 0, 3 mA to 120 mA set by the external resistor. |
| 6 | OUT1 | output | Constant-current sink output 1, 3 mA to 120 mA set by the external resistor. |
| 7 | OUT2 | output | Constant-current sink output 2, 3 mA to 120 mA set by the external resistor. |
| 8 | OUT3 | output | Constant-current sink output 3, 3 mA to 120 mA set by the external resistor. |
| 9 | OUT4 | output | Constant-current sink output 4, 3 mA to 120 mA set by the external resistor. |
| 10 | OUT5 | output | Constant-current sink output 5, 3 mA to 120 mA set by the external resistor. |
| 11 | OUT6 | output | Constant-current sink output 6, 3 mA to 120 mA set by the external resistor. |
| 12 | OUT7 | output | Constant-current sink output 7, 3 mA to 120 mA set by the external resistor. |
| 13 | OE(ED2) | input | Output enable: outputs are enabled when low and all turned off (blanked) when high; also a control input for Error Detection Mode and Current Adjust Mode, with an internal pullup. |
| 14 | SDO | output | Serial-data output to the SDI of the next driver IC or to the microcontroller. |
| 15 | R-EXT | input | External resistor connected to ground sets the current for all outputs. |
| 16 | VDD | power_in | Supply voltage, 3 V to 5.5 V recommended (7 V absolute maximum). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 0 | 7 | V | 4 | ||
| Output voltage | VO | -0.5 | 20 | V | 4 | ||
| Clock frequency | fclk | 25 | MHz | 4 | |||
| Output current | IOUT | 120 | mA | 4 | |||
| GND terminal current | IGND | 960 | mA | 4 | |||
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| ESD HBM | V(ESD) | -1500 | 1500 | V | Human-body model, ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD CDM | V(ESD) | -500 | 500 | V | Charged-device model, JESD22-C101 | 4 | |
| Supply voltage | VDD | 3 | 5.5 | V | 4 | ||
| Supply voltage to output pins | VO | 20 | V | OUT0-OUT7 | 4 | ||
| Output current | IO | 3 | mA | VO ≥ 0.6 V, DC test circuit | 4 | ||
| Output current | IO | 120 | mA | VO ≥ 1 V, DC test circuit | 4 | ||
| High-level output current source | IOH | -1 | mA | SDO shorted to GND | 4 | ||
| Low-level output current sink | IOL | 1 | mA | SDO shorted to VCC | 4 | ||
| Output leakage current | Ileak | 0.5 | μA | VOH = 17 V, TJ = 25°C, VDD = 3 V | 5 | ||
| Output leakage current | Ileak | 2 | μA | VOH = 17 V, TJ = 125°C, VDD = 3 V | 5 | ||
| Low-level output voltage | VOL | 0.4 | V | SDO, IOH = 1 mA | 5 | ||
| Output current error, die-die | IO(1) | -6 | 3 | 6 | % | IOL = 26 mA, VO = 0.6 V, Rext = 720 Ω, TJ = 25°C | 5 |
| Output current skew, channel-to-channel | IO(1) | -3 | 1.5 | 3 | % | IOL = 26 mA, VO = 0.6 V, Rext = 720 Ω, TJ = 25°C | 5 |
| Output current error, die-die | IO(2) | -6 | 2 | 6 | % | IOL = 52 mA, VO = 0.8 V, Rext = 360 Ω, TJ = 25°C | 5 |
| Overtemperature shutdown | Tsd | 150 | 175 | 200 | °C | Specified by design | 5 |
| Trigger threshold voltage for short-error detection | VOUT,TTh | 2.5 | 2.7 | 3.1 | V | IOUT,target = 3 mA to 120 mA (TLC5917 only) | 5 |
| Supply current | IDD | 5 | 10 | mA | VDD = 3 V, Rext = Open | 5 | |
| Supply current | IDD | 8 | 14 | mA | VDD = 3 V, Rext = 720 Ω | 5 | |
| Supply current | IDD | 11 | 18 | mA | VDD = 3 V, Rext = 360 Ω | 5 | |
| Supply current | IDD | 16 | 22 | mA | VDD = 3 V, Rext = 180 Ω | 5 | |
| Supply current | IDD | 6 | 10 | mA | VDD = 5.5 V, Rext = Open | 6 | |
| Supply current | IDD | 11 | 14 | mA | VDD = 5.5 V, Rext = 720 Ω | 6 | |
| Supply current | IDD | 13 | 18 | mA | VDD = 5.5 V, Rext = 360 Ω | 6 | |
| Supply current | IDD | 19 | 24 | mA | VDD = 5.5 V, Rext = 180 Ω | 6 | |
| Propagation delay CLK to OUTn, low-to-high | tPLH1 | 40 | 65 | 95 | ns | VDD = 3 V | 7 |
| Propagation delay CLK to OUTn, high-to-low | tPHL1 | 300 | 365 | ns | VDD = 3 V | 7 | |
| Propagation delay CLK to SDO, low-to-high | tPLH4 | 12 | 20 | 30 | ns | VDD = 3 V | 7 |
| LE(ED1) pulse duration | tw(L) | 20 | ns | Normal Mode | 9 | ||
| CLK pulse duration | tw(CLK) | 20 | ns | Normal Mode | 9 | ||
| OE(ED2) pulse duration | tw(OE) | 500 | ns | Normal Mode, IOUT < 60 mA | 9 | ||
| OE(ED2) pulse duration | tw(OE) | 700 | ns | Normal Mode, IOUT > 60 mA | 9 | ||
| Setup time for SDI | tsu(D) | 3 | ns | Normal Mode | 9 | ||
| Hold time for SDI | th(D) | 2 | ns | Normal Mode | 9 | ||
| Setup time for LE(ED1) | tsu(L) | 15 | ns | Normal Mode | 9 | ||
| Hold time for LE(ED1) | th(L) | 15 | ns | Normal Mode | 9 | ||
| OE(ED2) pulse duration | tw(ED2) | 2000 | ns | Error Detection Mode | 9 | ||
| Setup time for LE(ED1) | tsu(ED1) | 4 | ns | Error Detection Mode | 9 | ||
| Hold time for LE(ED1) | th(ED1) | 10 | ns | Error Detection Mode | 9 | ||
| Setup time for OE(ED2) | tsu(ED2) | 6 | ns | Error Detection Mode | 9 | ||
| Hold time for OE(ED2) | th(ED2) | 10 | ns | Error Detection Mode | 9 | ||
| Clock frequency | fCLK | 30 | MHz | Cascade operation | 9 | ||
| Junction-to-ambient thermal resistance | RθJA | 87.4 | °C/W | D package, 16 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 48.1 | °C/W | D package, 16 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 44.4 | °C/W | D package, 16 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 12.5 | °C/W | D package, 16 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 44.2 | °C/W | D package, 16 pins | 4 | ||
| Output current 1 | IO(1) | 26 | mA | VOUT = 0.6 V, Rext = 720 Ω, CG = 0.992 | 5 | ||
| Output current 2 | IO(2) | 52 | mA | VO = 0.8 V, Rext = 360 Ω, CG = 0.992 | 5 | ||
| Restart temperature hysteresis | Thys | 15 | °C | Specified by design | 5 | ||
| Pullup resistance OE(ED2) | 500 | kΩ | 5 | ||||
| Pulldown resistance LE(ED1) | 500 | kΩ | 5 |
CAD (KiCad official)
- Symbol:
TLC5917IDR - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
tlc5917idr-etched.step/tlc5917idr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc5917idr.step/tlc5917idr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
f257e916f7b5d37b, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).