main
Ray
Initial commit: component/tlc59108fipwr
4224cd2
TLC59108FIPWR
Texas Instruments · LED Drivers · TSSOP-20
TLC59108FIPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N.C. | unconnected | No internal connection |
| 2 | A0 | input | Address input 0 for I2C slave address selection, must be pulled to VCC or GND |
| 3 | A1 | input | Address input 1 for I2C slave address selection, must be pulled to VCC or GND |
| 4 | A2 | input | Address input 2 for I2C slave address selection, must be pulled to VCC or GND |
| 5 | A3 | input | Address input 3 for I2C slave address selection, must be pulled to VCC or GND |
| 6 | OUT0 | tri_state | Open-drain output 0 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |
| 7 | OUT1 | tri_state | Open-drain output 1 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |
| 8 | GND | power_in | Ground, return path for power supply and signal reference |
| 9 | OUT2 | tri_state | Open-drain output 2 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |
| 10 | OUT3 | tri_state | Open-drain output 3 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |
| 11 | OUT4 | tri_state | Open-drain output 4 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |
| 12 | OUT5 | tri_state | Open-drain output 5 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |
| 13 | GND | power_in | Ground, return path for power supply and signal reference |
| 14 | OUT6 | tri_state | Open-drain output 6 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |
| 15 | OUT7 | tri_state | Open-drain output 7 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |
| 16 | GND | power_in | Ground, return path for power supply and signal reference |
| 17 | RESET | input | Active-low reset input, minimum pulse width tW = 10 ns to reset all registers to default state |
| 18 | SCL | input | I2C serial clock input for 1 MHz Fast-Mode Plus interface |
| 19 | SDA | bidirectional | I2C serial data input/output with 30 mA high drive capability for 1 MHz Fast-Mode Plus interface |
| 20 | VCC | power_in | Power supply, 3 V to 5.5 V operating range, decoupling capacitor recommended |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | LED Drivers |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
TLC59108FIPWR - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
tlc59108fipwr-etched.step/tlc59108fipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc59108fipwr.step/tlc59108fipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
5825c2ebbe07ee7e, retrieved 2026-09-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TLC59108FIPWR
**Texas Instruments** · LED Drivers · TSSOP-20
TLC59108FIPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N.C. | unconnected | No internal connection |
| 2 | A0 | input | Address input 0 for I2C slave address selection, must be pulled to VCC or GND |
| 3 | A1 | input | Address input 1 for I2C slave address selection, must be pulled to VCC or GND |
| 4 | A2 | input | Address input 2 for I2C slave address selection, must be pulled to VCC or GND |
| 5 | A3 | input | Address input 3 for I2C slave address selection, must be pulled to VCC or GND |
| 6 | OUT0 | tri_state | Open-drain output 0 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |
| 7 | OUT1 | tri_state | Open-drain output 1 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |
| 8 | GND | power_in | Ground, return path for power supply and signal reference |
| 9 | OUT2 | tri_state | Open-drain output 2 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |
| 10 | OUT3 | tri_state | Open-drain output 3 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |
| 11 | OUT4 | tri_state | Open-drain output 4 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |
| 12 | OUT5 | tri_state | Open-drain output 5 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |
| 13 | GND | power_in | Ground, return path for power supply and signal reference |
| 14 | OUT6 | tri_state | Open-drain output 6 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |
| 15 | OUT7 | tri_state | Open-drain output 7 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |
| 16 | GND | power_in | Ground, return path for power supply and signal reference |
| 17 | RESET | input | Active-low reset input, minimum pulse width tW = 10 ns to reset all registers to default state |
| 18 | SCL | input | I2C serial clock input for 1 MHz Fast-Mode Plus interface |
| 19 | SDA | bidirectional | I2C serial data input/output with 30 mA high drive capability for 1 MHz Fast-Mode Plus interface |
| 20 | VCC | power_in | Power supply, 3 V to 5.5 V operating range, decoupling capacitor recommended |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | LED Drivers |
| Pins | 20 |
## CAD (KiCad official)
- Symbol: `TLC59108FIPWR`
- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`
- 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files: `tlc59108fipwr-etched.step` / `tlc59108fipwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlc59108fipwr.step` / `tlc59108fipwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlc59108f) (37 pp, sha256 `5825c2ebbe07ee7e`, retrieved 2026-09-26, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tlc59108fipwr-datasheet.pdf)