← Commit history

Initial commit: component/tlc59108fipwr

Ray ·4224cd29fd ·
2 files changed +283
README.mdadded+56
@@ -0,0 +1,56 @@+# TLC59108FIPWR++**Texas Instruments** · LED Drivers · TSSOP-20++TLC59108FIPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | N.C. | unconnected | No internal connection |+| 2 | A0 | input | Address input 0 for I2C slave address selection, must be pulled to VCC or GND |+| 3 | A1 | input | Address input 1 for I2C slave address selection, must be pulled to VCC or GND |+| 4 | A2 | input | Address input 2 for I2C slave address selection, must be pulled to VCC or GND |+| 5 | A3 | input | Address input 3 for I2C slave address selection, must be pulled to VCC or GND |+| 6 | OUT0 | tri_state | Open-drain output 0 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |+| 7 | OUT1 | tri_state | Open-drain output 1 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |+| 8 | GND | power_in | Ground, return path for power supply and signal reference |+| 9 | OUT2 | tri_state | Open-drain output 2 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |+| 10 | OUT3 | tri_state | Open-drain output 3 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |+| 11 | OUT4 | tri_state | Open-drain output 4 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |+| 12 | OUT5 | tri_state | Open-drain output 5 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |+| 13 | GND | power_in | Ground, return path for power supply and signal reference |+| 14 | OUT6 | tri_state | Open-drain output 6 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |+| 15 | OUT7 | tri_state | Open-drain output 7 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage |+| 16 | GND | power_in | Ground, return path for power supply and signal reference |+| 17 | RESET | input | Active-low reset input, minimum pulse width tW = 10 ns to reset all registers to default state |+| 18 | SCL | input | I2C serial clock input for 1 MHz Fast-Mode Plus interface |+| 19 | SDA | bidirectional | I2C serial data input/output with 30 mA high drive capability for 1 MHz Fast-Mode Plus interface |+| 20 | VCC | power_in | Power supply, 3 V to 5.5 V operating range, decoupling capacitor recommended |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-20 |+| Category | LED Drivers |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `TLC59108FIPWR`+- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`+- 3D model: TSSOP-20 (KiCad packages3D, STEP)+- 3D model files: `tlc59108fipwr-etched.step` / `tlc59108fipwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlc59108fipwr.step` / `tlc59108fipwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlc59108f) (37 pp, sha256 `5825c2ebbe07ee7e`, retrieved 2026-09-26, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tlc59108fipwr-datasheet.pdf)
page.jsonadded+227
@@ -0,0 +1,227 @@+{+  "slug": "tlc59108fipwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments LED Drivers, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "tlc59108fipwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tlc59108fipwr.kicad_sym",+    "tlc59108fipwr.kicad_mod",+    "tlc59108fipwr.glb",+    "tlc59108fipwr.step",+    "tlc59108fipwr.lbr",+    "docs/hero.png",+    "docs/tlc59108fipwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TLC59108FIPWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-20",+    "pin_count": 20,+    "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tlc59108f",+    "parts": {+      "symbol": "tlc59108fipwr.kicad_sym",+      "footprint": "tlc59108fipwr.kicad_mod",+      "model_3d": "tlc59108fipwr-etched.glb",+      "model_3d_plain": "tlc59108fipwr.glb",+      "model_3d_step": "tlc59108fipwr-etched.step",+      "model_3d_step_plain": "tlc59108fipwr.step",+      "lbr": "tlc59108fipwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2678527",+      "digikey": "296-25400-2-ND",+      "mouser": "595-TLC59108FIPWR"+    },+    "distributor_check": {+      "checked_at": "2026-09-26T22:23:43Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-25400-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-TLC59108FIPWR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "N.C.",+        "type": "unconnected",+        "description": "No internal connection"+      },+      {+        "number": "2",+        "name": "A0",+        "type": "input",+        "description": "Address input 0 for I2C slave address selection, must be pulled to VCC or GND"+      },+      {+        "number": "3",+        "name": "A1",+        "type": "input",+        "description": "Address input 1 for I2C slave address selection, must be pulled to VCC or GND"+      },+      {+        "number": "4",+        "name": "A2",+        "type": "input",+        "description": "Address input 2 for I2C slave address selection, must be pulled to VCC or GND"+      },+      {+        "number": "5",+        "name": "A3",+        "type": "input",+        "description": "Address input 3 for I2C slave address selection, must be pulled to VCC or GND"+      },+      {+        "number": "6",+        "name": "OUT0",+        "type": "tri_state",+        "description": "Open-drain output 0 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage"+      },+      {+        "number": "7",+        "name": "OUT1",+        "type": "tri_state",+        "description": "Open-drain output 1 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage"+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground, return path for power supply and signal reference"+      },+      {+        "number": "9",+        "name": "OUT2",+        "type": "tri_state",+        "description": "Open-drain output 2 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage"+      },+      {+        "number": "10",+        "name": "OUT3",+        "type": "tri_state",+        "description": "Open-drain output 3 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage"+      },+      {+        "number": "11",+        "name": "OUT4",+        "type": "tri_state",+        "description": "Open-drain output 4 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage"+      },+      {+        "number": "12",+        "name": "OUT5",+        "type": "tri_state",+        "description": "Open-drain output 5 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage"+      },+      {+        "number": "13",+        "name": "GND",+        "type": "power_in",+        "description": "Ground, return path for power supply and signal reference"+      },+      {+        "number": "14",+        "name": "OUT6",+        "type": "tri_state",+        "description": "Open-drain output 6 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage"+      },+      {+        "number": "15",+        "name": "OUT7",+        "type": "tri_state",+        "description": "Open-drain output 7 for LED driver, sources 5 to 120 mA and tolerates 17 V output voltage"+      },+      {+        "number": "16",+        "name": "GND",+        "type": "power_in",+        "description": "Ground, return path for power supply and signal reference"+      },+      {+        "number": "17",+        "name": "RESET",+        "type": "input",+        "description": "Active-low reset input, minimum pulse width tW = 10 ns to reset all registers to default state"+      },+      {+        "number": "18",+        "name": "SCL",+        "type": "input",+        "description": "I2C serial clock input for 1 MHz Fast-Mode Plus interface"+      },+      {+        "number": "19",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I2C serial data input/output with 30 mA high drive capability for 1 MHz Fast-Mode Plus interface"+      },+      {+        "number": "20",+        "name": "VCC",+        "type": "power_in",+        "description": "Power supply, 3 V to 5.5 V operating range, decoupling capacitor recommended"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 37,+        "cost_usd": 0.3681,+        "at": "2026-09-26T22:23:25"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tlc59108f",+        "pages": 37,+        "sha256": "5825c2ebbe07ee7e",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file