main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tlc5510ains: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tlc5510ains-etched.glb Publish 0.1.0 · Ray
tlc5510ains-etched.step tlc5510ains: factory component page (tier=mfr) · Ray
tlc5510ains-hero.glb tlc5510ains: hero GLB from the etched model (keeps the MPN mark) · Ray
tlc5510ains-hero.overlay.json Publish 0.1.0 · Ray
tlc5510ains.glb Publish 0.1.0 · Ray
tlc5510ains.kicad_mod Publish 0.1.0 · Ray
tlc5510ains.kicad_sym Publish 0.1.0 · Ray
tlc5510ains.lbr Publish 0.1.0 · Ray
tlc5510ains.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 24 pins · Ray

TLC5510AINS

Texas Instruments · Analog To Digital Converters (ADCs) · SO-24-208mil

TLC5510AINS from Texas Instruments, in a SO-24-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE input Output enable: when OE is low the data outputs D1-D8 are enabled, and when OE is high D1-D8 are placed in the high-impedance state.
2 DGND power_in Digital ground; AGND and DGND are connected internally, so the ground lead must be kept as noise free as possible.
3 D1 tri_state Digital data output bit 1, the LSB, active when OE is low (high-impedance when OE is high).
4 D2 tri_state Digital data output bit 2, active when OE is low (high-impedance when OE is high).
5 D3 tri_state Digital data output bit 3, active when OE is low (high-impedance when OE is high).
6 D4 tri_state Digital data output bit 4, active when OE is low (high-impedance when OE is high).
7 D5 tri_state Digital data output bit 5, active when OE is low (high-impedance when OE is high).
8 D6 tri_state Digital data output bit 6, active when OE is low (high-impedance when OE is high).
9 D7 tri_state Digital data output bit 7, active when OE is low (high-impedance when OE is high).
10 D8 (MSB) tri_state Digital data output bit 8, the MSB, active when OE is low (high-impedance when OE is high).
11 VDDD power_in Digital supply voltage, 4.75 V to 5.25 V (5 V nominal) with respect to AGND.
12 CLK input Clock input; the clock high and low pulse durations must each be at least 25 ns.
13 VDDD power_in Digital supply voltage, 4.75 V to 5.25 V (5 V nominal) with respect to AGND.
14 VDDA power_in Analog supply voltage, 4.75 V to 5.25 V (5 V nominal) with respect to AGND.
15 VDDA power_in Analog supply voltage, 4.75 V to 5.25 V (5 V nominal) with respect to AGND.
16 REFTS passive Top reference strap: shorted to REFT for the TLC5510 internal 2-V divider, and connected to VDDA for the TLC5510A.
17 REFT input Top reference voltage input; for the TLC5510A it must be between VREFB + 2 V and 4 V, applied externally across the center divider resistor.
18 VDDA power_in Analog supply voltage, 4.75 V to 5.25 V (5 V nominal) with respect to AGND.
19 ANALOG IN input Analog input; the input voltage range is VREFB to VREFT, and the driving source resistance should be 10 Ω or less within the frequency range of interest.
20 AGND power_in Analog ground, to be tied to the analog ground plane.
21 AGND power_in Analog ground, to be tied to the analog ground plane.
22 REFBS passive Bottom reference strap: shorted to REFB for the TLC5510 internal 2-V divider, and connected to ground for the TLC5510A.
23 REFB input Bottom reference voltage input; for the TLC5510A it must be between 0 V and VREFT - 4 V.
24 DGND power_in Digital ground; AGND and DGND are connected internally, so the ground lead must be kept as noise free as possible.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SO-24-208mil
Category ADC/DAC/Data Conversion
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDDA-AGND 4.75 5 5.25 V 3
AGND-DGND voltage AGND-DGND -100 0 100 mV 3
Reference input voltage (top), TLC5510A Vref(T) 4 V 3
Reference input voltage (bottom), TLC5510A Vref(B) 0 V 3
High-level input voltage VIH 4 V 3
Low-level input voltage VIL 1 V 3
Pulse duration, clock high tw(H) 25 ns (see Figure 1) 3
Pulse duration, clock low tw(L) 25 ns (see Figure 1) 3
Supply current IDD 18 27 mA f(CLK) = 20 MHz, NTSC ramp wave input, reference resistor dissipation is separate 4
Reference voltage current, TLC5510A Iref 10.4 15 21 mA Vref = REFT, REFB = 4 V 4
High-level input current IIH 5 µA VDD = MAX, VIH = VDD 4
Low-level input current IIL 5 µA VDD = MAX, VIL = 0 4
High-level output current IOH -1.5 mA OE = GND, VDD = MIN, VOH = VDD-0.5 V 4
Low-level output current IOL 2.5 mA OE = GND, VDD = MIN, VOL = 0.4 V 4
High-level high-impedance-state output leakage current IOZH 16 µA OE = VDD, VDD = MAX VOH = VDD 4
Low-level high-impedance-state output leakage current IOZL 16 µA OE = VDD, VDD = MIN VOL = 0 4
Self-bias (1), at REFB 0.57 0.61 0.65 V Short REFB to REFBS, Short REFT to REFTS 4
Self-bias (2), REFT, REFB 1.9 2.02 2.15 V Short REFB to REFBS, Short REFT to REFTS 4
Self-bias (3), at REFT 2.18 2.29 2.4 V Short REFB to AGND, Short REFT to REFTS 4
Reference voltage resistor Rref 190 270 350 Ω Between REFT and REFB 4
Integral nonlinearity (INL), TA = 25°C INL -0.75 0.4 0.75 LSB f(CLK) = 20 MHz, VI = 0 to 4 V, TA = 25°C 4
Integral nonlinearity (INL), full temperature range INL -1 1 LSB f(CLK) = 20 MHz, VI = 0 to 4 V, TA = -20°C to 75°C 4
Differential nonlinearity (DNL), TA = 25°C DNL -0.5 0.3 0.5 LSB f(CLK) = 20 MHz, VI = 0 to 4 V, TA = 25°C 4
Differential nonlinearity (DNL), full temperature range DNL -0.75 0.75 LSB f(CLK) = 20 MHz, VI = 0 to 4 V, TA = -20°C to 75°C 4
Zero-scale error, TLC5510A EZS -136 -86 -36 mV Vref = REFT, REFB = 4 V 4
Full-scale error, TLC5510A EFS -40 0 40 mV Vref = REFT, REFB = 4 V 4
Maximum conversion rate, TLC5510A fconv 20 MSPS fI = 1-kHz ramp VI(ANLG) = 0 V, 4 V 5
Digital output delay time td(D) 18 30 ns CL ≤ 10 pF (see Note 1 and Figure 1) 5
Supply voltage, VDDA, VDDD VDDA, VDDD 7 V 3
Operating free-air temperature range TA -20 75 °C 3
Storage temperature range Tstg -55 150 °C 3

CAD (KiCad official)

  • Symbol: TLC5510AINS
  • Footprint: Package_SO:SO-24_5.3x15mm_P1.27mm
  • 3D model: SO-24-208mil, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.75 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tlc5510ains-etched.step / tlc5510ains-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlc5510ains.step / tlc5510ains.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (22 pp, sha256 342cbda59fa98fd6, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF