3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLC5510AINS
Texas Instruments · Analog To Digital Converters (ADCs) · SO-24-208mil
TLC5510AINS from Texas Instruments, in a SO-24-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable: when OE is low the data outputs D1-D8 are enabled, and when OE is high D1-D8 are placed in the high-impedance state. |
| 2 | DGND | power_in | Digital ground; AGND and DGND are connected internally, so the ground lead must be kept as noise free as possible. |
| 3 | D1 | tri_state | Digital data output bit 1, the LSB, active when OE is low (high-impedance when OE is high). |
| 4 | D2 | tri_state | Digital data output bit 2, active when OE is low (high-impedance when OE is high). |
| 5 | D3 | tri_state | Digital data output bit 3, active when OE is low (high-impedance when OE is high). |
| 6 | D4 | tri_state | Digital data output bit 4, active when OE is low (high-impedance when OE is high). |
| 7 | D5 | tri_state | Digital data output bit 5, active when OE is low (high-impedance when OE is high). |
| 8 | D6 | tri_state | Digital data output bit 6, active when OE is low (high-impedance when OE is high). |
| 9 | D7 | tri_state | Digital data output bit 7, active when OE is low (high-impedance when OE is high). |
| 10 | D8 (MSB) | tri_state | Digital data output bit 8, the MSB, active when OE is low (high-impedance when OE is high). |
| 11 | VDDD | power_in | Digital supply voltage, 4.75 V to 5.25 V (5 V nominal) with respect to AGND. |
| 12 | CLK | input | Clock input; the clock high and low pulse durations must each be at least 25 ns. |
| 13 | VDDD | power_in | Digital supply voltage, 4.75 V to 5.25 V (5 V nominal) with respect to AGND. |
| 14 | VDDA | power_in | Analog supply voltage, 4.75 V to 5.25 V (5 V nominal) with respect to AGND. |
| 15 | VDDA | power_in | Analog supply voltage, 4.75 V to 5.25 V (5 V nominal) with respect to AGND. |
| 16 | REFTS | passive | Top reference strap: shorted to REFT for the TLC5510 internal 2-V divider, and connected to VDDA for the TLC5510A. |
| 17 | REFT | input | Top reference voltage input; for the TLC5510A it must be between VREFB + 2 V and 4 V, applied externally across the center divider resistor. |
| 18 | VDDA | power_in | Analog supply voltage, 4.75 V to 5.25 V (5 V nominal) with respect to AGND. |
| 19 | ANALOG IN | input | Analog input; the input voltage range is VREFB to VREFT, and the driving source resistance should be 10 Ω or less within the frequency range of interest. |
| 20 | AGND | power_in | Analog ground, to be tied to the analog ground plane. |
| 21 | AGND | power_in | Analog ground, to be tied to the analog ground plane. |
| 22 | REFBS | passive | Bottom reference strap: shorted to REFB for the TLC5510 internal 2-V divider, and connected to ground for the TLC5510A. |
| 23 | REFB | input | Bottom reference voltage input; for the TLC5510A it must be between 0 V and VREFT - 4 V. |
| 24 | DGND | power_in | Digital ground; AGND and DGND are connected internally, so the ground lead must be kept as noise free as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-24-208mil |
| Category | ADC/DAC/Data Conversion |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDDA-AGND | 4.75 | 5 | 5.25 | V | 3 | |
| AGND-DGND voltage | AGND-DGND | -100 | 0 | 100 | mV | 3 | |
| Reference input voltage (top), TLC5510A | Vref(T) | 4 | V | 3 | |||
| Reference input voltage (bottom), TLC5510A | Vref(B) | 0 | V | 3 | |||
| High-level input voltage | VIH | 4 | V | 3 | |||
| Low-level input voltage | VIL | 1 | V | 3 | |||
| Pulse duration, clock high | tw(H) | 25 | ns | (see Figure 1) | 3 | ||
| Pulse duration, clock low | tw(L) | 25 | ns | (see Figure 1) | 3 | ||
| Supply current | IDD | 18 | 27 | mA | f(CLK) = 20 MHz, NTSC ramp wave input, reference resistor dissipation is separate | 4 | |
| Reference voltage current, TLC5510A | Iref | 10.4 | 15 | 21 | mA | Vref = REFT, REFB = 4 V | 4 |
| High-level input current | IIH | 5 | µA | VDD = MAX, VIH = VDD | 4 | ||
| Low-level input current | IIL | 5 | µA | VDD = MAX, VIL = 0 | 4 | ||
| High-level output current | IOH | -1.5 | mA | OE = GND, VDD = MIN, VOH = VDD-0.5 V | 4 | ||
| Low-level output current | IOL | 2.5 | mA | OE = GND, VDD = MIN, VOL = 0.4 V | 4 | ||
| High-level high-impedance-state output leakage current | IOZH | 16 | µA | OE = VDD, VDD = MAX VOH = VDD | 4 | ||
| Low-level high-impedance-state output leakage current | IOZL | 16 | µA | OE = VDD, VDD = MIN VOL = 0 | 4 | ||
| Self-bias (1), at REFB | 0.57 | 0.61 | 0.65 | V | Short REFB to REFBS, Short REFT to REFTS | 4 | |
| Self-bias (2), REFT, REFB | 1.9 | 2.02 | 2.15 | V | Short REFB to REFBS, Short REFT to REFTS | 4 | |
| Self-bias (3), at REFT | 2.18 | 2.29 | 2.4 | V | Short REFB to AGND, Short REFT to REFTS | 4 | |
| Reference voltage resistor | Rref | 190 | 270 | 350 | Ω | Between REFT and REFB | 4 |
| Integral nonlinearity (INL), TA = 25°C | INL | -0.75 | 0.4 | 0.75 | LSB | f(CLK) = 20 MHz, VI = 0 to 4 V, TA = 25°C | 4 |
| Integral nonlinearity (INL), full temperature range | INL | -1 | 1 | LSB | f(CLK) = 20 MHz, VI = 0 to 4 V, TA = -20°C to 75°C | 4 | |
| Differential nonlinearity (DNL), TA = 25°C | DNL | -0.5 | 0.3 | 0.5 | LSB | f(CLK) = 20 MHz, VI = 0 to 4 V, TA = 25°C | 4 |
| Differential nonlinearity (DNL), full temperature range | DNL | -0.75 | 0.75 | LSB | f(CLK) = 20 MHz, VI = 0 to 4 V, TA = -20°C to 75°C | 4 | |
| Zero-scale error, TLC5510A | EZS | -136 | -86 | -36 | mV | Vref = REFT, REFB = 4 V | 4 |
| Full-scale error, TLC5510A | EFS | -40 | 0 | 40 | mV | Vref = REFT, REFB = 4 V | 4 |
| Maximum conversion rate, TLC5510A | fconv | 20 | MSPS | fI = 1-kHz ramp VI(ANLG) = 0 V, 4 V | 5 | ||
| Digital output delay time | td(D) | 18 | 30 | ns | CL ≤ 10 pF (see Note 1 and Figure 1) | 5 | |
| Supply voltage, VDDA, VDDD | VDDA, VDDD | 7 | V | 3 | |||
| Operating free-air temperature range | TA | -20 | 75 | °C | 3 | ||
| Storage temperature range | Tstg | -55 | 150 | °C | 3 |
CAD (KiCad official)
- Symbol:
TLC5510AINS - Footprint:
Package_SO:SO-24_5.3x15mm_P1.27mm - 3D model: SO-24-208mil, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.75 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tlc5510ains-etched.step/tlc5510ains-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc5510ains.step/tlc5510ains.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (22 pp, sha256
342cbda59fa98fd6, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).