main
Ray
Publish 0.1.0
3e7afac
TLC274CPW
Texas Instruments · Operational Amplifier · TSSOP-14
TLC274CPW from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of channel 1; the absolute maximum output current is ±30 mA per output. |
| 2 | 1IN- | input | Inverting input of channel 1; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix). |
| 3 | 1IN+ | input | Noninverting input of channel 1; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix). |
| 4 | VDD | power_in | Positive (highest) power supply; the supply voltage is 3 V to 16 V for the C suffix, with an absolute maximum of 18 V. |
| 5 | 2IN+ | input | Noninverting input of channel 2; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix). |
| 6 | 2IN- | input | Inverting input of channel 2; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix). |
| 7 | 2OUT | output | Output of channel 2; the absolute maximum output current is ±30 mA per output. |
| 8 | 3OUT | output | Output of channel 3; the absolute maximum output current is ±30 mA per output. |
| 9 | 3IN- | input | Inverting input of channel 3; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix). |
| 10 | 3IN+ | input | Noninverting input of channel 3; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix). |
| 11 | GND | power_in | Negative (lowest) power supply or ground; all voltages are referenced to network ground. |
| 12 | 4IN+ | input | Noninverting input of channel 4; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix). |
| 13 | 4IN- | input | Inverting input of channel 4; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix). |
| 14 | 4OUT | output | Output of channel 4; the absolute maximum output current is ±30 mA per output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VDD | 18 | V | 4 | |||
| Input current | II | -5 | 5 | mA | 4 | ||
| Output current | IO | -30 | 30 | mA | Each output | 4 | |
| Total current into VDD | 45 | mA | 4 | ||||
| Supply voltage | VDD | 3 | 16 | V | C suffix | 4 | |
| Common-mode input voltage | VIC | -0.2 | 3.5 | V | VDD = 5V, C suffix | 4 | |
| Common-mode input voltage | VIC | -0.2 | 8.5 | V | VDD = 10V, C suffix | 4 | |
| Operating free-air temperature | TA | 0 | 70 | °C | C suffix | 4 | |
| Input offset voltage | VIO | 0.12 | 10 | mV | VDD = 5V; 25°C; VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ | 5 | |
| Input offset voltage | VIO | 12 | mV | VDD = 5V; full range (0°C to 70°C); VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ | 5 | ||
| Input offset current | IIO | 10 | 60 | pA | VDD = 5V; 25°C; VO = 2.5V, VIC = 2.5V | 5 | |
| Input offset current | IIO | 7 | 300 | pA | VDD = 5V; 70°C; VO = 2.5V, VIC = 2.5V | 5 | |
| Input bias current | IIB | 10 | 60 | pA | VDD = 5V; 25°C | 5 | |
| Input bias current | IIB | 40 | 600 | pA | VDD = 5V; 70°C | 5 | |
| Common-mode input voltage range | VICR | -0.1 | 4 | V | VDD = 5V; 25°C | 5 | |
| Common-mode input voltage range | VICR | -0.1 | 3.5 | V | VDD = 5V; full range (0°C to 70°C) | 5 | |
| High-level output voltage | VOH | 3.2 | 4.95 | V | VDD = 5V; 25°C; VID = 100mV, RL = 10kΩ | 5 | |
| High-level output voltage | VOH | 3 | 4.95 | V | VDD = 5V; 0°C; VID = 100mV, RL = 10kΩ | 5 | |
| Low-level output voltage | VOL | 0 | 50 | mV | VDD = 5V; 25°C; VID = -100 mV, IOL = 0 | 5 | |
| Large-signal differential voltage amplification | AVD | 5 | 1000 | V/mV | VDD = 5V; 25°C; VO = 0.25V to 2V, RL = 10kΩ | 5 | |
| Large-signal differential voltage amplification | AVD | 4 | V/mV | VDD = 5V; 0°C; VO = 0.25V to 2V, RL = 10kΩ | 5 | ||
| Common-mode rejection ratio | CMRR | 65 | 80 | dB | VDD = 5V; 25°C; VIC = -0.1V < VIC < 3V | 5 | |
| Common-mode rejection ratio | CMRR | 60 | dB | VDD = 5V; 0°C; VIC = -0.1V < VIC < 3V | 5 | ||
| Supply-voltage rejection ratio | kSVR | 65 | 120 | dB | VDD = 5V to 10V; 25°C; VO = 1.4V | 5 | |
| Supply-voltage rejection ratio | kSVR | 60 | dB | VDD = 5V to 10V; 0°C; VO = 1.4V | 5 | ||
| Supply current (four amplifiers) | IDD | 2.24 | 6.4 | mA | VDD = 5V; 25°C; VO = 2.5V, No load, VIC = 2.5V | 5 | |
| Supply current (four amplifiers) | IDD | 7.2 | mA | VDD = 5V; 0°C; VO = 2.5V, No load, VIC = 2.5V | 5 | ||
| Supply current (four amplifiers) | IDD | 5.2 | mA | VDD = 5V; 70°C; VO = 2.5V, No load, VIC = 2.5V | 5 | ||
| Input offset voltage | VIO | 0.12 | 10 | mV | VDD = 10V; 25°C; VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ | 6 | |
| Input offset voltage | VIO | 12 | mV | VDD = 10V; full range (0°C to 70°C); VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ | 6 | ||
| Input offset current | IIO | 10 | 60 | pA | VDD = 10V; 25°C; VO = 5V, VIC = 5V | 6 | |
| Input offset current | IIO | 7 | 300 | pA | VDD = 10V; 70°C; VO = 5V, VIC = 5V | 6 | |
| Input bias current | IIB | 10 | 60 | pA | VDD = 10V; 25°C | 6 | |
| Input bias current | IIB | 50 | 600 | pA | VDD = 10V; 70°C | 6 | |
| Common-mode input voltage range | VICR | -0.1 | 9 | V | VDD = 10V; 25°C | 6 | |
| Common-mode input voltage range | VICR | -0.1 | 8.5 | V | VDD = 10V; full range (0°C to 70°C) | 6 | |
| High-level output voltage | VOH | 8 | 9.95 | V | VDD = 10V; 25°C; VID = 100mV, RL = 10kΩ | 6 | |
| High-level output voltage | VOH | 7.8 | V | VDD = 10V; 0°C; VID = 100mV, RL = 10kΩ | 6 | ||
| Low-level output voltage | VOL | 0 | 50 | mV | VDD = 10V; 25°C; VID = -100 mV, IOL = 0 | 6 | |
| Large-signal differential voltage amplification | AVD | 10 | 1000 | V/mV | VDD = 10V; 25°C; VO = 1V to 6V, RL = 10kΩ | 6 | |
| Large-signal differential voltage amplification | AVD | 7.5 | V/mV | VDD = 10V; 0°C; VO = 1V to 6V, RL = 10kΩ | 6 | ||
| Common-mode rejection ratio | CMRR | 65 | 85 | dB | VDD = 10V; 25°C; VIC = -0.1V < VIC < 8V | 6 | |
| Common-mode rejection ratio | CMRR | 60 | dB | VDD = 10V; 0°C; VIC = -0.1V < VIC < 8V | 6 | ||
| Supply-voltage rejection ratio | kSVR | 65 | 120 | dB | VDD = 5V to 10V; 25°C; VO = 1.4V | 6 | |
| Supply-voltage rejection ratio | kSVR | 60 | dB | VDD = 5V to 10V; 0°C; VO = 1.4V | 6 | ||
| Supply current (four amplifiers) | IDD | 2.24 | 8 | mA | VDD = 10V; 25°C; VO = 5V, No load, VIC = 5V | 6 | |
| Supply current (four amplifiers) | IDD | 8.8 | mA | VDD = 10V; 0°C; VO = 5V, No load, VIC = 5V | 6 | ||
| Supply current (four amplifiers) | IDD | 6.8 | mA | VDD = 10V; 70°C; VO = 5V, No load, VIC = 5V | 6 |
CAD (KiCad official)
- Symbol:
TLC274CPW - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
tlc274cpw-etched.step/tlc274cpw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc274cpw.step/tlc274cpw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
5c8f977b352c50d3, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TLC274CPW
**Texas Instruments** · Operational Amplifier · TSSOP-14
TLC274CPW from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of channel 1; the absolute maximum output current is ±30 mA per output. |
| 2 | 1IN- | input | Inverting input of channel 1; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix). |
| 3 | 1IN+ | input | Noninverting input of channel 1; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix). |
| 4 | VDD | power_in | Positive (highest) power supply; the supply voltage is 3 V to 16 V for the C suffix, with an absolute maximum of 18 V. |
| 5 | 2IN+ | input | Noninverting input of channel 2; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix). |
| 6 | 2IN- | input | Inverting input of channel 2; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix). |
| 7 | 2OUT | output | Output of channel 2; the absolute maximum output current is ±30 mA per output. |
| 8 | 3OUT | output | Output of channel 3; the absolute maximum output current is ±30 mA per output. |
| 9 | 3IN- | input | Inverting input of channel 3; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix). |
| 10 | 3IN+ | input | Noninverting input of channel 3; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix). |
| 11 | GND | power_in | Negative (lowest) power supply or ground; all voltages are referenced to network ground. |
| 12 | 4IN+ | input | Noninverting input of channel 4; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix). |
| 13 | 4IN- | input | Inverting input of channel 4; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix). |
| 14 | 4OUT | output | Output of channel 4; the absolute maximum output current is ±30 mA per output. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VDD | | | 18 | V | | 4 |
| Input current | II | -5 | | 5 | mA | | 4 |
| Output current | IO | -30 | | 30 | mA | Each output | 4 |
| Total current into VDD | | | | 45 | mA | | 4 |
| Supply voltage | VDD | 3 | | 16 | V | C suffix | 4 |
| Common-mode input voltage | VIC | -0.2 | | 3.5 | V | VDD = 5V, C suffix | 4 |
| Common-mode input voltage | VIC | -0.2 | | 8.5 | V | VDD = 10V, C suffix | 4 |
| Operating free-air temperature | TA | 0 | | 70 | °C | C suffix | 4 |
| Input offset voltage | VIO | | 0.12 | 10 | mV | VDD = 5V; 25°C; VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ | 5 |
| Input offset voltage | VIO | | | 12 | mV | VDD = 5V; full range (0°C to 70°C); VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ | 5 |
| Input offset current | IIO | | 10 | 60 | pA | VDD = 5V; 25°C; VO = 2.5V, VIC = 2.5V | 5 |
| Input offset current | IIO | | 7 | 300 | pA | VDD = 5V; 70°C; VO = 2.5V, VIC = 2.5V | 5 |
| Input bias current | IIB | | 10 | 60 | pA | VDD = 5V; 25°C | 5 |
| Input bias current | IIB | | 40 | 600 | pA | VDD = 5V; 70°C | 5 |
| Common-mode input voltage range | VICR | -0.1 | | 4 | V | VDD = 5V; 25°C | 5 |
| Common-mode input voltage range | VICR | -0.1 | | 3.5 | V | VDD = 5V; full range (0°C to 70°C) | 5 |
| High-level output voltage | VOH | 3.2 | 4.95 | | V | VDD = 5V; 25°C; VID = 100mV, RL = 10kΩ | 5 |
| High-level output voltage | VOH | 3 | 4.95 | | V | VDD = 5V; 0°C; VID = 100mV, RL = 10kΩ | 5 |
| Low-level output voltage | VOL | | 0 | 50 | mV | VDD = 5V; 25°C; VID = -100 mV, IOL = 0 | 5 |
| Large-signal differential voltage amplification | AVD | 5 | 1000 | | V/mV | VDD = 5V; 25°C; VO = 0.25V to 2V, RL = 10kΩ | 5 |
| Large-signal differential voltage amplification | AVD | 4 | | | V/mV | VDD = 5V; 0°C; VO = 0.25V to 2V, RL = 10kΩ | 5 |
| Common-mode rejection ratio | CMRR | 65 | 80 | | dB | VDD = 5V; 25°C; VIC = -0.1V < VIC < 3V | 5 |
| Common-mode rejection ratio | CMRR | 60 | | | dB | VDD = 5V; 0°C; VIC = -0.1V < VIC < 3V | 5 |
| Supply-voltage rejection ratio | kSVR | 65 | 120 | | dB | VDD = 5V to 10V; 25°C; VO = 1.4V | 5 |
| Supply-voltage rejection ratio | kSVR | 60 | | | dB | VDD = 5V to 10V; 0°C; VO = 1.4V | 5 |
| Supply current (four amplifiers) | IDD | | 2.24 | 6.4 | mA | VDD = 5V; 25°C; VO = 2.5V, No load, VIC = 2.5V | 5 |
| Supply current (four amplifiers) | IDD | | | 7.2 | mA | VDD = 5V; 0°C; VO = 2.5V, No load, VIC = 2.5V | 5 |
| Supply current (four amplifiers) | IDD | | | 5.2 | mA | VDD = 5V; 70°C; VO = 2.5V, No load, VIC = 2.5V | 5 |
| Input offset voltage | VIO | | 0.12 | 10 | mV | VDD = 10V; 25°C; VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ | 6 |
| Input offset voltage | VIO | | | 12 | mV | VDD = 10V; full range (0°C to 70°C); VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ | 6 |
| Input offset current | IIO | | 10 | 60 | pA | VDD = 10V; 25°C; VO = 5V, VIC = 5V | 6 |
| Input offset current | IIO | | 7 | 300 | pA | VDD = 10V; 70°C; VO = 5V, VIC = 5V | 6 |
| Input bias current | IIB | | 10 | 60 | pA | VDD = 10V; 25°C | 6 |
| Input bias current | IIB | | 50 | 600 | pA | VDD = 10V; 70°C | 6 |
| Common-mode input voltage range | VICR | -0.1 | | 9 | V | VDD = 10V; 25°C | 6 |
| Common-mode input voltage range | VICR | -0.1 | | 8.5 | V | VDD = 10V; full range (0°C to 70°C) | 6 |
| High-level output voltage | VOH | 8 | 9.95 | | V | VDD = 10V; 25°C; VID = 100mV, RL = 10kΩ | 6 |
| High-level output voltage | VOH | 7.8 | | | V | VDD = 10V; 0°C; VID = 100mV, RL = 10kΩ | 6 |
| Low-level output voltage | VOL | | 0 | 50 | mV | VDD = 10V; 25°C; VID = -100 mV, IOL = 0 | 6 |
| Large-signal differential voltage amplification | AVD | 10 | 1000 | | V/mV | VDD = 10V; 25°C; VO = 1V to 6V, RL = 10kΩ | 6 |
| Large-signal differential voltage amplification | AVD | 7.5 | | | V/mV | VDD = 10V; 0°C; VO = 1V to 6V, RL = 10kΩ | 6 |
| Common-mode rejection ratio | CMRR | 65 | 85 | | dB | VDD = 10V; 25°C; VIC = -0.1V < VIC < 8V | 6 |
| Common-mode rejection ratio | CMRR | 60 | | | dB | VDD = 10V; 0°C; VIC = -0.1V < VIC < 8V | 6 |
| Supply-voltage rejection ratio | kSVR | 65 | 120 | | dB | VDD = 5V to 10V; 25°C; VO = 1.4V | 6 |
| Supply-voltage rejection ratio | kSVR | 60 | | | dB | VDD = 5V to 10V; 0°C; VO = 1.4V | 6 |
| Supply current (four amplifiers) | IDD | | 2.24 | 8 | mA | VDD = 10V; 25°C; VO = 5V, No load, VIC = 5V | 6 |
| Supply current (four amplifiers) | IDD | | | 8.8 | mA | VDD = 10V; 0°C; VO = 5V, No load, VIC = 5V | 6 |
| Supply current (four amplifiers) | IDD | | | 6.8 | mA | VDD = 10V; 70°C; VO = 5V, No load, VIC = 5V | 6 |
## CAD (KiCad official)
- Symbol: `TLC274CPW`
- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`
- 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files: `tlc274cpw-etched.step` / `tlc274cpw-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlc274cpw.step` / `tlc274cpw.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tlc274.pdf) (37 pp, sha256 `5c8f977b352c50d3`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tlc274cpw-datasheet.pdf)