Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLC274CPW

Texas Instruments · Operational Amplifier · TSSOP-14

TLC274CPW from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Output of channel 1; the absolute maximum output current is ±30 mA per output.
2 1IN- input Inverting input of channel 1; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix).
3 1IN+ input Noninverting input of channel 1; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix).
4 VDD power_in Positive (highest) power supply; the supply voltage is 3 V to 16 V for the C suffix, with an absolute maximum of 18 V.
5 2IN+ input Noninverting input of channel 2; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix).
6 2IN- input Inverting input of channel 2; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix).
7 2OUT output Output of channel 2; the absolute maximum output current is ±30 mA per output.
8 3OUT output Output of channel 3; the absolute maximum output current is ±30 mA per output.
9 3IN- input Inverting input of channel 3; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix).
10 3IN+ input Noninverting input of channel 3; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix).
11 GND power_in Negative (lowest) power supply or ground; all voltages are referenced to network ground.
12 4IN+ input Noninverting input of channel 4; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix).
13 4IN- input Inverting input of channel 4; the input current is limited to ±5 mA and the common-mode input range is -0.2 V to 3.5 V at VDD = 5 V (C suffix).
14 4OUT output Output of channel 4; the absolute maximum output current is ±30 mA per output.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-14
Category Amplifiers/Comparators
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VDD 18 V 4
Input current II -5 5 mA 4
Output current IO -30 30 mA Each output 4
Total current into VDD 45 mA 4
Supply voltage VDD 3 16 V C suffix 4
Common-mode input voltage VIC -0.2 3.5 V VDD = 5V, C suffix 4
Common-mode input voltage VIC -0.2 8.5 V VDD = 10V, C suffix 4
Operating free-air temperature TA 0 70 °C C suffix 4
Input offset voltage VIO 0.12 10 mV VDD = 5V; 25°C; VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ 5
Input offset voltage VIO 12 mV VDD = 5V; full range (0°C to 70°C); VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ 5
Input offset current IIO 10 60 pA VDD = 5V; 25°C; VO = 2.5V, VIC = 2.5V 5
Input offset current IIO 7 300 pA VDD = 5V; 70°C; VO = 2.5V, VIC = 2.5V 5
Input bias current IIB 10 60 pA VDD = 5V; 25°C 5
Input bias current IIB 40 600 pA VDD = 5V; 70°C 5
Common-mode input voltage range VICR -0.1 4 V VDD = 5V; 25°C 5
Common-mode input voltage range VICR -0.1 3.5 V VDD = 5V; full range (0°C to 70°C) 5
High-level output voltage VOH 3.2 4.95 V VDD = 5V; 25°C; VID = 100mV, RL = 10kΩ 5
High-level output voltage VOH 3 4.95 V VDD = 5V; 0°C; VID = 100mV, RL = 10kΩ 5
Low-level output voltage VOL 0 50 mV VDD = 5V; 25°C; VID = -100 mV, IOL = 0 5
Large-signal differential voltage amplification AVD 5 1000 V/mV VDD = 5V; 25°C; VO = 0.25V to 2V, RL = 10kΩ 5
Large-signal differential voltage amplification AVD 4 V/mV VDD = 5V; 0°C; VO = 0.25V to 2V, RL = 10kΩ 5
Common-mode rejection ratio CMRR 65 80 dB VDD = 5V; 25°C; VIC = -0.1V < VIC < 3V 5
Common-mode rejection ratio CMRR 60 dB VDD = 5V; 0°C; VIC = -0.1V < VIC < 3V 5
Supply-voltage rejection ratio kSVR 65 120 dB VDD = 5V to 10V; 25°C; VO = 1.4V 5
Supply-voltage rejection ratio kSVR 60 dB VDD = 5V to 10V; 0°C; VO = 1.4V 5
Supply current (four amplifiers) IDD 2.24 6.4 mA VDD = 5V; 25°C; VO = 2.5V, No load, VIC = 2.5V 5
Supply current (four amplifiers) IDD 7.2 mA VDD = 5V; 0°C; VO = 2.5V, No load, VIC = 2.5V 5
Supply current (four amplifiers) IDD 5.2 mA VDD = 5V; 70°C; VO = 2.5V, No load, VIC = 2.5V 5
Input offset voltage VIO 0.12 10 mV VDD = 10V; 25°C; VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ 6
Input offset voltage VIO 12 mV VDD = 10V; full range (0°C to 70°C); VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ 6
Input offset current IIO 10 60 pA VDD = 10V; 25°C; VO = 5V, VIC = 5V 6
Input offset current IIO 7 300 pA VDD = 10V; 70°C; VO = 5V, VIC = 5V 6
Input bias current IIB 10 60 pA VDD = 10V; 25°C 6
Input bias current IIB 50 600 pA VDD = 10V; 70°C 6
Common-mode input voltage range VICR -0.1 9 V VDD = 10V; 25°C 6
Common-mode input voltage range VICR -0.1 8.5 V VDD = 10V; full range (0°C to 70°C) 6
High-level output voltage VOH 8 9.95 V VDD = 10V; 25°C; VID = 100mV, RL = 10kΩ 6
High-level output voltage VOH 7.8 V VDD = 10V; 0°C; VID = 100mV, RL = 10kΩ 6
Low-level output voltage VOL 0 50 mV VDD = 10V; 25°C; VID = -100 mV, IOL = 0 6
Large-signal differential voltage amplification AVD 10 1000 V/mV VDD = 10V; 25°C; VO = 1V to 6V, RL = 10kΩ 6
Large-signal differential voltage amplification AVD 7.5 V/mV VDD = 10V; 0°C; VO = 1V to 6V, RL = 10kΩ 6
Common-mode rejection ratio CMRR 65 85 dB VDD = 10V; 25°C; VIC = -0.1V < VIC < 8V 6
Common-mode rejection ratio CMRR 60 dB VDD = 10V; 0°C; VIC = -0.1V < VIC < 8V 6
Supply-voltage rejection ratio kSVR 65 120 dB VDD = 5V to 10V; 25°C; VO = 1.4V 6
Supply-voltage rejection ratio kSVR 60 dB VDD = 5V to 10V; 0°C; VO = 1.4V 6
Supply current (four amplifiers) IDD 2.24 8 mA VDD = 10V; 25°C; VO = 5V, No load, VIC = 5V 6
Supply current (four amplifiers) IDD 8.8 mA VDD = 10V; 0°C; VO = 5V, No load, VIC = 5V 6
Supply current (four amplifiers) IDD 6.8 mA VDD = 10V; 70°C; VO = 5V, No load, VIC = 5V 6

CAD (KiCad official)

  • Symbol: TLC274CPW
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: tlc274cpw-etched.step / tlc274cpw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlc274cpw.step / tlc274cpw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 5c8f977b352c50d3, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF