main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tlc272ip: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tlc272ip: viewers · Ray
package.json tlc272ip: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tlc272ip: specified limits as data (metadata.characteristics, 60 rows from the datasheet) · Ray
README.md tlc272ip: specified limits as data (metadata.characteristics, 60 rows from the datasheet) · Ray
tlc272ip-etched.fit.json tlc272ip: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tlc272ip-etched.glb tlc272ip: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tlc272ip-etched.step tlc272ip: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tlc272ip.glb Publish 0.1.0 · Ray
tlc272ip.kicad_mod Publish 0.1.0 · Ray
tlc272ip.kicad_sym Publish 0.1.0 · Ray
tlc272ip.lbr Publish 0.1.0 · Ray
tlc272ip.step Publish 0.1.0 · Ray

TLC272IP

Texas Instruments · Operational Amplifier · PDIP-8

TLC272IP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Output of amplifier 1; output voltage range extends to the negative supply rail, with VOH up to 4.95V and VOL down to 0V typical at VDD=5V, RL=10kΩ.
2 1IN- input Inverting input of amplifier 1; part of a high-impedance (>10^12Ω typical) input with common-mode voltage range extending below the negative rail (I-suffix types).
3 1IN+ input Non-inverting input of amplifier 1; part of a high-impedance (>10^12Ω typical) input with common-mode voltage range extending below the negative rail (I-suffix types).
4 GND power_in Ground/negative supply reference pin; all voltages except differential input voltage are referenced to this network ground pin.
5 2IN+ input Non-inverting input of amplifier 2; part of a high-impedance (>10^12Ω typical) input with common-mode voltage range extending below the negative rail (I-suffix types).
6 2IN- input Inverting input of amplifier 2; part of a high-impedance (>10^12Ω typical) input with common-mode voltage range extending below the negative rail (I-suffix types).
7 2OUT output Output of amplifier 2; output voltage range extends to the negative supply rail, with VOH up to 4.95V and VOL down to 0V typical at VDD=5V, RL=10kΩ.
8 VDD power_in Positive supply voltage pin; recommended operating range is 4V to 16V for I-suffix devices (absolute maximum 18V), single-supply operation is optimized.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage at 25°C VIO 0.12 10 mV VDD = 5V; VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ 7
Input offset voltage, full range VIO 13 mV VDD = 5V; VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ 7
Input offset current at 25°C IIO 10 60 pA VDD = 5V; VO = 2.5V, VIC = 2.5V 7
Input offset current at 85°C IIO 24 15 pA VDD = 5V; VO = 2.5V, VIC = 2.5V 7
Input bias current at 25°C IIB 10 60 pA VDD = 5V 7
Input bias current at 85°C IIB 200 35 pA VDD = 5V 7
Common-mode input voltage range at 25°C (pair 1) VICR -0.1 4 V VDD = 5V 7
Common-mode input voltage range at 25°C (pair 2) VICR -0.3 4.2 V VDD = 5V 7
Common-mode input voltage range, full range VICR -0.1 3.5 V VDD = 5V 7
High-level output voltage at 25°C VOH 3.2 4.95 V VDD = 5V; VID = 100mV, RL = 10kΩ 7
High-level output voltage at -40°C VOH 3 4.95 V VDD = 5V; VID = 100mV, RL = 10kΩ 7
High-level output voltage at 85°C VOH 3 4.95 V VDD = 5V; VID = 100mV, RL = 10kΩ 7
Low-level output voltage at 25°C VOL 0 50 mV VDD = 5V; VID = -100mV, IOL = 0 7
Large-signal differential voltage amplification at 25°C AVD 5 1000 V/mV VDD = 5V; VO = 1V to 6V, RL = 10kΩ 7
Large-signal differential voltage amplification at -40°C AVD 3.5 V/mV VDD = 5V; VO = 1V to 6V, RL = 10kΩ 7
Large-signal differential voltage amplification at 85°C AVD 3.5 V/mV VDD = 5V; VO = 1V to 6V, RL = 10kΩ 7
Common-mode rejection ratio at 25°C CMRR 65 80 dB VDD = 5V; VIC = -0.1V < VIC < 3V 7
Common-mode rejection ratio at -40°C CMRR 60 dB VDD = 5V; VIC = -0.1V < VIC < 3V 7
Common-mode rejection ratio at 85°C CMRR 60 dB VDD = 5V; VIC = -0.1V < VIC < 3V 7
Supply voltage rejection ratio at 25°C kSVR 65 120 dB VDD = 5V to 10V; VO = 1.4V 7
Supply voltage rejection ratio at -40°C kSVR 60 dB VDD = 5V to 10V; VO = 1.4V 7
Supply current (two amplifiers) at 25°C IDD 1.12 3.2 mA VDD = 5V; VO = 2.5V, no load, VIC = 2.5V 7
Supply current (two amplifiers) at -40°C IDD 4.4 mA VDD = 5V; VO = 2.5V, no load, VIC = 2.5V 7
Supply current (two amplifiers) at 85°C IDD 2.4 mA VDD = 5V; VO = 2.5V, no load, VIC = 2.5V 7
Input offset voltage at 25°C VIO 0.12 10 mV VDD = 10V; VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ 8
Input offset voltage, full range VIO 13 mV VDD = 10V; VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ 8
Input offset current at 25°C IIO 10 60 pA VDD = 10V; VO = 5V, VIC = 5V 8
Input offset current at 85°C IIO 26 1000 pA VDD = 10V; VO = 5V, VIC = 5V 8
Input bias current at 25°C IIB 10 60 pA VDD = 10V 8
Input bias current at 85°C IIB 220 2000 pA VDD = 10V 8
Common-mode input voltage range at 25°C (pair 1) VICR -0.1 9 V VDD = 10V 8
Common-mode input voltage range at 25°C (pair 2) VICR -0.3 9.2 V VDD = 10V 8
Common-mode input voltage range, full range VICR -0.1 8.5 V VDD = 10V 8
High-level output voltage at 25°C VOH 8 9.95 V VDD = 10V; VID = 100mV, RL = 10kΩ 8
High-level output voltage at -40°C VOH 7.8 V VDD = 10V; VID = 100mV, RL = 10kΩ 8
High-level output voltage at 85°C VOH 7.8 V VDD = 10V; VID = 100mV, RL = 10kΩ 8
Low-level output voltage at 25°C VOL 0 50 mV VDD = 10V; VID = -100 mV, IOL = 0 8
Large-signal differential voltage amplification at 25°C AVD 10 1000 V/mV VDD = 10V; VO = 1V to 6V, RL = 10kΩ 8
Large-signal differential voltage amplification at -40°C AVD 7 V/mV VDD = 10V; VO = 1V to 6V, RL = 10kΩ 8
Large-signal differential voltage amplification at 85°C AVD 7 V/mV VDD = 10V; VO = 1V to 6V, RL = 10kΩ 8
Common-mode rejection ratio at 25°C CMRR 65 85 dB VDD = 10V; VIC = -0.1V < VIC < 8V 8
Common-mode rejection ratio at -40°C CMRR 60 dB VDD = 10V; VIC = -0.1V < VIC < 8V 8
Common-mode rejection ratio at 85°C CMRR 60 88 dB VDD = 10V; VIC = -0.1V < VIC < 8V 8
Supply voltage rejection ratio at 25°C (printed as kSSVR) kSSVR 65 120 dB VDD = 5V to 10V; VO = 1.4V 8
Supply voltage rejection ratio at -40°C (printed as kSSVR) kSSVR 60 dB VDD = 5V to 10V; VO = 1.4V 8
Supply current (two amplifiers) at 25°C IDD 1.12 4 mA VDD = 10V; VO = 5V, no load, VIC = 5V 8
Supply current (two amplifiers) at -40°C IDD 5 mA VDD = 10V; VO = 5V, no load, VIC = 5V 8
Supply current (two amplifiers) at 85°C IDD 3.2 mA VDD = 10V; VO = 5V, no load, VIC = 5V 8
Supply voltage (absolute maximum) VDD 18 V 4
Input voltage range (absolute maximum); max printed as VDD VI -0.3 V any input 4
Input current (absolute maximum) II -5 5 mA 4
Output current (absolute maximum) IO -30 30 mA each output 4
Total current into VDD (absolute maximum) 45 mA 4
Total current out of GND (absolute maximum) 45 mA 4
Operating free-air temperature (absolute maximum), I suffix TA -40 85 °C I suffix; natural ventilation 4
Storage temperature (absolute maximum) Tstg -65 150 °C 4
Supply voltage (recommended), I suffix VDD 4 16 V I suffix 4
Common-mode input voltage (recommended), I suffix VIC -0.2 3.5 V I suffix; VDD = 5V 4
Common-mode input voltage (recommended), I suffix VIC -0.2 8.5 V I suffix; VDD = 10V 4
Operating free-air temperature (recommended), I suffix TA -40 85 °C I suffix; natural ventilation 4

CAD (KiCad official)

  • Symbol: TLC272IP
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: tlc272ip-etched.step / tlc272ip-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlc272ip.step / tlc272ip.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 4ca1a774f0255db3, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-sonnet-5 (text+vision), consensus claude-opus-4-8 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF