3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLC272IP
Texas Instruments · Operational Amplifier · PDIP-8
TLC272IP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier 1; output voltage range extends to the negative supply rail, with VOH up to 4.95V and VOL down to 0V typical at VDD=5V, RL=10kΩ. |
| 2 | 1IN- | input | Inverting input of amplifier 1; part of a high-impedance (>10^12Ω typical) input with common-mode voltage range extending below the negative rail (I-suffix types). |
| 3 | 1IN+ | input | Non-inverting input of amplifier 1; part of a high-impedance (>10^12Ω typical) input with common-mode voltage range extending below the negative rail (I-suffix types). |
| 4 | GND | power_in | Ground/negative supply reference pin; all voltages except differential input voltage are referenced to this network ground pin. |
| 5 | 2IN+ | input | Non-inverting input of amplifier 2; part of a high-impedance (>10^12Ω typical) input with common-mode voltage range extending below the negative rail (I-suffix types). |
| 6 | 2IN- | input | Inverting input of amplifier 2; part of a high-impedance (>10^12Ω typical) input with common-mode voltage range extending below the negative rail (I-suffix types). |
| 7 | 2OUT | output | Output of amplifier 2; output voltage range extends to the negative supply rail, with VOH up to 4.95V and VOL down to 0V typical at VDD=5V, RL=10kΩ. |
| 8 | VDD | power_in | Positive supply voltage pin; recommended operating range is 4V to 16V for I-suffix devices (absolute maximum 18V), single-supply operation is optimized. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage at 25°C | VIO | 0.12 | 10 | mV | VDD = 5V; VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ | 7 | |
| Input offset voltage, full range | VIO | 13 | mV | VDD = 5V; VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ | 7 | ||
| Input offset current at 25°C | IIO | 10 | 60 | pA | VDD = 5V; VO = 2.5V, VIC = 2.5V | 7 | |
| Input offset current at 85°C | IIO | 24 | 15 | pA | VDD = 5V; VO = 2.5V, VIC = 2.5V | 7 | |
| Input bias current at 25°C | IIB | 10 | 60 | pA | VDD = 5V | 7 | |
| Input bias current at 85°C | IIB | 200 | 35 | pA | VDD = 5V | 7 | |
| Common-mode input voltage range at 25°C (pair 1) | VICR | -0.1 | 4 | V | VDD = 5V | 7 | |
| Common-mode input voltage range at 25°C (pair 2) | VICR | -0.3 | 4.2 | V | VDD = 5V | 7 | |
| Common-mode input voltage range, full range | VICR | -0.1 | 3.5 | V | VDD = 5V | 7 | |
| High-level output voltage at 25°C | VOH | 3.2 | 4.95 | V | VDD = 5V; VID = 100mV, RL = 10kΩ | 7 | |
| High-level output voltage at -40°C | VOH | 3 | 4.95 | V | VDD = 5V; VID = 100mV, RL = 10kΩ | 7 | |
| High-level output voltage at 85°C | VOH | 3 | 4.95 | V | VDD = 5V; VID = 100mV, RL = 10kΩ | 7 | |
| Low-level output voltage at 25°C | VOL | 0 | 50 | mV | VDD = 5V; VID = -100mV, IOL = 0 | 7 | |
| Large-signal differential voltage amplification at 25°C | AVD | 5 | 1000 | V/mV | VDD = 5V; VO = 1V to 6V, RL = 10kΩ | 7 | |
| Large-signal differential voltage amplification at -40°C | AVD | 3.5 | V/mV | VDD = 5V; VO = 1V to 6V, RL = 10kΩ | 7 | ||
| Large-signal differential voltage amplification at 85°C | AVD | 3.5 | V/mV | VDD = 5V; VO = 1V to 6V, RL = 10kΩ | 7 | ||
| Common-mode rejection ratio at 25°C | CMRR | 65 | 80 | dB | VDD = 5V; VIC = -0.1V < VIC < 3V | 7 | |
| Common-mode rejection ratio at -40°C | CMRR | 60 | dB | VDD = 5V; VIC = -0.1V < VIC < 3V | 7 | ||
| Common-mode rejection ratio at 85°C | CMRR | 60 | dB | VDD = 5V; VIC = -0.1V < VIC < 3V | 7 | ||
| Supply voltage rejection ratio at 25°C | kSVR | 65 | 120 | dB | VDD = 5V to 10V; VO = 1.4V | 7 | |
| Supply voltage rejection ratio at -40°C | kSVR | 60 | dB | VDD = 5V to 10V; VO = 1.4V | 7 | ||
| Supply current (two amplifiers) at 25°C | IDD | 1.12 | 3.2 | mA | VDD = 5V; VO = 2.5V, no load, VIC = 2.5V | 7 | |
| Supply current (two amplifiers) at -40°C | IDD | 4.4 | mA | VDD = 5V; VO = 2.5V, no load, VIC = 2.5V | 7 | ||
| Supply current (two amplifiers) at 85°C | IDD | 2.4 | mA | VDD = 5V; VO = 2.5V, no load, VIC = 2.5V | 7 | ||
| Input offset voltage at 25°C | VIO | 0.12 | 10 | mV | VDD = 10V; VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ | 8 | |
| Input offset voltage, full range | VIO | 13 | mV | VDD = 10V; VO = 1.4V, RS = 50Ω, VIC = 0, RL = 10kΩ | 8 | ||
| Input offset current at 25°C | IIO | 10 | 60 | pA | VDD = 10V; VO = 5V, VIC = 5V | 8 | |
| Input offset current at 85°C | IIO | 26 | 1000 | pA | VDD = 10V; VO = 5V, VIC = 5V | 8 | |
| Input bias current at 25°C | IIB | 10 | 60 | pA | VDD = 10V | 8 | |
| Input bias current at 85°C | IIB | 220 | 2000 | pA | VDD = 10V | 8 | |
| Common-mode input voltage range at 25°C (pair 1) | VICR | -0.1 | 9 | V | VDD = 10V | 8 | |
| Common-mode input voltage range at 25°C (pair 2) | VICR | -0.3 | 9.2 | V | VDD = 10V | 8 | |
| Common-mode input voltage range, full range | VICR | -0.1 | 8.5 | V | VDD = 10V | 8 | |
| High-level output voltage at 25°C | VOH | 8 | 9.95 | V | VDD = 10V; VID = 100mV, RL = 10kΩ | 8 | |
| High-level output voltage at -40°C | VOH | 7.8 | V | VDD = 10V; VID = 100mV, RL = 10kΩ | 8 | ||
| High-level output voltage at 85°C | VOH | 7.8 | V | VDD = 10V; VID = 100mV, RL = 10kΩ | 8 | ||
| Low-level output voltage at 25°C | VOL | 0 | 50 | mV | VDD = 10V; VID = -100 mV, IOL = 0 | 8 | |
| Large-signal differential voltage amplification at 25°C | AVD | 10 | 1000 | V/mV | VDD = 10V; VO = 1V to 6V, RL = 10kΩ | 8 | |
| Large-signal differential voltage amplification at -40°C | AVD | 7 | V/mV | VDD = 10V; VO = 1V to 6V, RL = 10kΩ | 8 | ||
| Large-signal differential voltage amplification at 85°C | AVD | 7 | V/mV | VDD = 10V; VO = 1V to 6V, RL = 10kΩ | 8 | ||
| Common-mode rejection ratio at 25°C | CMRR | 65 | 85 | dB | VDD = 10V; VIC = -0.1V < VIC < 8V | 8 | |
| Common-mode rejection ratio at -40°C | CMRR | 60 | dB | VDD = 10V; VIC = -0.1V < VIC < 8V | 8 | ||
| Common-mode rejection ratio at 85°C | CMRR | 60 | 88 | dB | VDD = 10V; VIC = -0.1V < VIC < 8V | 8 | |
| Supply voltage rejection ratio at 25°C (printed as kSSVR) | kSSVR | 65 | 120 | dB | VDD = 5V to 10V; VO = 1.4V | 8 | |
| Supply voltage rejection ratio at -40°C (printed as kSSVR) | kSSVR | 60 | dB | VDD = 5V to 10V; VO = 1.4V | 8 | ||
| Supply current (two amplifiers) at 25°C | IDD | 1.12 | 4 | mA | VDD = 10V; VO = 5V, no load, VIC = 5V | 8 | |
| Supply current (two amplifiers) at -40°C | IDD | 5 | mA | VDD = 10V; VO = 5V, no load, VIC = 5V | 8 | ||
| Supply current (two amplifiers) at 85°C | IDD | 3.2 | mA | VDD = 10V; VO = 5V, no load, VIC = 5V | 8 | ||
| Supply voltage (absolute maximum) | VDD | 18 | V | 4 | |||
| Input voltage range (absolute maximum); max printed as VDD | VI | -0.3 | V | any input | 4 | ||
| Input current (absolute maximum) | II | -5 | 5 | mA | 4 | ||
| Output current (absolute maximum) | IO | -30 | 30 | mA | each output | 4 | |
| Total current into VDD (absolute maximum) | 45 | mA | 4 | ||||
| Total current out of GND (absolute maximum) | 45 | mA | 4 | ||||
| Operating free-air temperature (absolute maximum), I suffix | TA | -40 | 85 | °C | I suffix; natural ventilation | 4 | |
| Storage temperature (absolute maximum) | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage (recommended), I suffix | VDD | 4 | 16 | V | I suffix | 4 | |
| Common-mode input voltage (recommended), I suffix | VIC | -0.2 | 3.5 | V | I suffix; VDD = 5V | 4 | |
| Common-mode input voltage (recommended), I suffix | VIC | -0.2 | 8.5 | V | I suffix; VDD = 10V | 4 | |
| Operating free-air temperature (recommended), I suffix | TA | -40 | 85 | °C | I suffix; natural ventilation | 4 |
CAD (KiCad official)
- Symbol:
TLC272IP - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
tlc272ip-etched.step/tlc272ip-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlc272ip.step/tlc272ip.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
4ca1a774f0255db3, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-5(text+vision), consensusclaude-opus-4-8(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).