main
Ray
tl432bipk: specified limits as data (metadata.characteristics, 19 rows from the datasheet)
11d5fa6
TL432BIPK
Texas Instruments · Voltage Reference · SOT-89-3
TL432BIPK from Texas Instruments, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CATHODE | bidirectional | Shunt regulator cathode node; sinks 1 mA to 100 mA (Imin=0.4 mA typ, abs-max continuous range −100 mA to 150 mA) to hold the programmed voltage, rated up to 37 V (abs max)/36 V (recommended) referenced to ANODE. |
| 2 | ANODE | output | Common/anode pin, normally tied to ground, providing the return path for the cathode current; on this SOT-89 (PK) package the metal mounting tab is internally tied to this same ANODE node. |
| 3 | REF | input | Reference input pin that must be biased with ≥ Iref (typ. 2 µA, max 4 µA) and is compared internally to the 2.495 V (typ) precision reference to control the cathode sink current; note TL432 swaps the REF and CATHODE pin positions relative to TL431. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-89-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 基准电压 (Reference voltage) | Vref | 2483 | 2495 | 2507 | mV | VKA = Vref, IKA = 10mA | 14 |
| 整个温度范围内的基准输入电压偏差 (Reference voltage deviation over temperature) | VI(dev) | 14 | 34 | mV | VKA = Vref, IKA = 10mA | 14 | |
| 基准电压变化与阴极电压变化之比, ΔVKA = 10V - Vref | ΔVref/ΔVKA | -1.4 | -2.7 | mV/V | IKA = 10mA, ΔVKA = 10V - Vref | 14 | |
| 基准电压变化与阴极电压变化之比, ΔVKA = 36V - 10V | ΔVref/ΔVKA | -1 | -2 | mV/V | IKA = 10mA, ΔVKA = 36V - 10V | 14 | |
| 基准输入电流 (Reference input current) | Iref | 2 | 4 | µA | IKA = 10mA, R1 = 10kΩ, R2 = ∞ | 14 | |
| 整个温度范围内的基准输入电流偏差 (Reference input current deviation over temperature) | II(dev) | 0.8 | 2.5 | µA | IKA = 10mA, R1 = 10kΩ, R2 = ∞ | 14 | |
| 调节的最小阴极电流 (Minimum cathode current for regulation) | Imin | 0.4 | 0.7 | mA | VKA = Vref | 14 | |
| 关闭状态阴极电流 (Off-state cathode current) | Ioff | 0.1 | 0.5 | µA | VKA = 36V, Vref = 0 | 14 | |
| 动态阻抗 (Dynamic impedance) | /ZKA/ | 0.2 | 0.5 | Ω | VKA = Vref, f ≤ 1kHz, IKA = 1mA to 100mA | 14 | |
| 阴极电压 (Cathode voltage) | VKA | 37 | V | Referenced to ANODE | 6 | ||
| 连续阴极电流范围 (Continuous cathode current range) | IKA | -100 | 150 | mA | 6 | ||
| 基准输入电流 (Reference input current) | II(ref) | -0.05 | 10 | mA | 6 | ||
| 工作结温范围 (Operating junction temperature) | TJ | 150 | °C | 6 | |||
| 贮存温度范围 (Storage temperature range) | Tstg | -65 | 150 | °C | 6 | ||
| 阴极电压 (Cathode voltage, recommended) | VKA | 36 | V | Minimum printed as Vref (not a numeric value) | 6 | ||
| 连续阴极电流范围 (Continuous cathode current, recommended) | IKA | 1 | 100 | mA | 6 | ||
| 自然通风工作温度范围, TL43xxI (Operating free-air temperature) | TA | -40 | 85 | °C | TL43xxI grade | 6 | |
| 结至环境热阻, PK package (Junction-to-ambient thermal resistance) | RθJA | 52 | °C/W | PK package column of thermal table | 6 | ||
| 结至外壳(顶部)热阻, PK package (Junction-to-case top thermal resistance) | RθJC(top) | 9 | °C/W | PK package column of thermal table | 6 |
CAD (KiCad official)
- Symbol:
TL432BIPK - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files:
tl432bipk-etched.step/tl432bipk-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl432bipk.step/tl432bipk.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (86 pp, sha256
313277b9351e61ed, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TL432BIPK
**Texas Instruments** · Voltage Reference · SOT-89-3
TL432BIPK from Texas Instruments, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CATHODE | bidirectional | Shunt regulator cathode node; sinks 1 mA to 100 mA (Imin=0.4 mA typ, abs-max continuous range −100 mA to 150 mA) to hold the programmed voltage, rated up to 37 V (abs max)/36 V (recommended) referenced to ANODE. |
| 2 | ANODE | output | Common/anode pin, normally tied to ground, providing the return path for the cathode current; on this SOT-89 (PK) package the metal mounting tab is internally tied to this same ANODE node. |
| 3 | REF | input | Reference input pin that must be biased with ≥ Iref (typ. 2 µA, max 4 µA) and is compared internally to the 2.495 V (typ) precision reference to control the cathode sink current; note TL432 swaps the REF and CATHODE pin positions relative to TL431. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-89-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 基准电压 (Reference voltage) | Vref | 2483 | 2495 | 2507 | mV | VKA = Vref, IKA = 10mA | 14 |
| 整个温度范围内的基准输入电压偏差 (Reference voltage deviation over temperature) | VI(dev) | | 14 | 34 | mV | VKA = Vref, IKA = 10mA | 14 |
| 基准电压变化与阴极电压变化之比, ΔVKA = 10V - Vref | ΔVref/ΔVKA | | -1.4 | -2.7 | mV/V | IKA = 10mA, ΔVKA = 10V - Vref | 14 |
| 基准电压变化与阴极电压变化之比, ΔVKA = 36V - 10V | ΔVref/ΔVKA | | -1 | -2 | mV/V | IKA = 10mA, ΔVKA = 36V - 10V | 14 |
| 基准输入电流 (Reference input current) | Iref | | 2 | 4 | µA | IKA = 10mA, R1 = 10kΩ, R2 = ∞ | 14 |
| 整个温度范围内的基准输入电流偏差 (Reference input current deviation over temperature) | II(dev) | | 0.8 | 2.5 | µA | IKA = 10mA, R1 = 10kΩ, R2 = ∞ | 14 |
| 调节的最小阴极电流 (Minimum cathode current for regulation) | Imin | | 0.4 | 0.7 | mA | VKA = Vref | 14 |
| 关闭状态阴极电流 (Off-state cathode current) | Ioff | | 0.1 | 0.5 | µA | VKA = 36V, Vref = 0 | 14 |
| 动态阻抗 (Dynamic impedance) | /ZKA/ | | 0.2 | 0.5 | Ω | VKA = Vref, f ≤ 1kHz, IKA = 1mA to 100mA | 14 |
| 阴极电压 (Cathode voltage) | VKA | | | 37 | V | Referenced to ANODE | 6 |
| 连续阴极电流范围 (Continuous cathode current range) | IKA | -100 | | 150 | mA | | 6 |
| 基准输入电流 (Reference input current) | II(ref) | -0.05 | | 10 | mA | | 6 |
| 工作结温范围 (Operating junction temperature) | TJ | | | 150 | °C | | 6 |
| 贮存温度范围 (Storage temperature range) | Tstg | -65 | | 150 | °C | | 6 |
| 阴极电压 (Cathode voltage, recommended) | VKA | | | 36 | V | Minimum printed as Vref (not a numeric value) | 6 |
| 连续阴极电流范围 (Continuous cathode current, recommended) | IKA | 1 | | 100 | mA | | 6 |
| 自然通风工作温度范围, TL43xxI (Operating free-air temperature) | TA | -40 | | 85 | °C | TL43xxI grade | 6 |
| 结至环境热阻, PK package (Junction-to-ambient thermal resistance) | RθJA | | 52 | | °C/W | PK package column of thermal table | 6 |
| 结至外壳(顶部)热阻, PK package (Junction-to-case top thermal resistance) | RθJC(top) | | 9 | | °C/W | PK package column of thermal table | 6 |
## CAD (KiCad official)
- Symbol: `TL432BIPK`
- Footprint: `Package_TO_SOT_SMD:SOT-89-3`
- 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files: `tl432bipk-etched.step` / `tl432bipk-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tl432bipk.step` / `tl432bipk.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tl431) (86 pp, sha256 `313277b9351e61ed`, retrieved 2026-09-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tl432bipk-datasheet.pdf)