Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TL432BIPK

Texas Instruments · Voltage Reference · SOT-89-3

TL432BIPK from Texas Instruments, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CATHODE bidirectional Shunt regulator cathode node; sinks 1 mA to 100 mA (Imin=0.4 mA typ, abs-max continuous range −100 mA to 150 mA) to hold the programmed voltage, rated up to 37 V (abs max)/36 V (recommended) referenced to ANODE.
2 ANODE output Common/anode pin, normally tied to ground, providing the return path for the cathode current; on this SOT-89 (PK) package the metal mounting tab is internally tied to this same ANODE node.
3 REF input Reference input pin that must be biased with ≥ Iref (typ. 2 µA, max 4 µA) and is compared internally to the 2.495 V (typ) precision reference to control the cathode sink current; note TL432 swaps the REF and CATHODE pin positions relative to TL431.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-89-3
Category Power Management (PMIC)
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
基准电压 (Reference voltage) Vref 2483 2495 2507 mV VKA = Vref, IKA = 10mA 14
整个温度范围内的基准输入电压偏差 (Reference voltage deviation over temperature) VI(dev) 14 34 mV VKA = Vref, IKA = 10mA 14
基准电压变化与阴极电压变化之比, ΔVKA = 10V - Vref ΔVref/ΔVKA -1.4 -2.7 mV/V IKA = 10mA, ΔVKA = 10V - Vref 14
基准电压变化与阴极电压变化之比, ΔVKA = 36V - 10V ΔVref/ΔVKA -1 -2 mV/V IKA = 10mA, ΔVKA = 36V - 10V 14
基准输入电流 (Reference input current) Iref 2 4 µA IKA = 10mA, R1 = 10kΩ, R2 = ∞ 14
整个温度范围内的基准输入电流偏差 (Reference input current deviation over temperature) II(dev) 0.8 2.5 µA IKA = 10mA, R1 = 10kΩ, R2 = ∞ 14
调节的最小阴极电流 (Minimum cathode current for regulation) Imin 0.4 0.7 mA VKA = Vref 14
关闭状态阴极电流 (Off-state cathode current) Ioff 0.1 0.5 µA VKA = 36V, Vref = 0 14
动态阻抗 (Dynamic impedance) /ZKA/ 0.2 0.5 Ω VKA = Vref, f ≤ 1kHz, IKA = 1mA to 100mA 14
阴极电压 (Cathode voltage) VKA 37 V Referenced to ANODE 6
连续阴极电流范围 (Continuous cathode current range) IKA -100 150 mA 6
基准输入电流 (Reference input current) II(ref) -0.05 10 mA 6
工作结温范围 (Operating junction temperature) TJ 150 °C 6
贮存温度范围 (Storage temperature range) Tstg -65 150 °C 6
阴极电压 (Cathode voltage, recommended) VKA 36 V Minimum printed as Vref (not a numeric value) 6
连续阴极电流范围 (Continuous cathode current, recommended) IKA 1 100 mA 6
自然通风工作温度范围, TL43xxI (Operating free-air temperature) TA -40 85 °C TL43xxI grade 6
结至环境热阻, PK package (Junction-to-ambient thermal resistance) RθJA 52 °C/W PK package column of thermal table 6
结至外壳(顶部)热阻, PK package (Junction-to-case top thermal resistance) RθJC(top) 9 °C/W PK package column of thermal table 6

CAD (KiCad official)

  • Symbol: TL432BIPK
  • Footprint: Package_TO_SOT_SMD:SOT-89-3
  • 3D model: SOT-89-3 (KiCad packages3D, STEP)
  • 3D model files: tl432bipk-etched.step / tl432bipk-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl432bipk.step / tl432bipk.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (86 pp, sha256 313277b9351e61ed, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF