main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tl432aidbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tl432aidbvr: viewers · Ray
package.json tl432aidbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tl432aidbvr: specified limits as data (metadata.characteristics, 19 rows from the datasheet) · Ray
README.md tl432aidbvr: specified limits as data (metadata.characteristics, 19 rows from the datasheet) · Ray
tl432aidbvr-etched.fit.json tl432aidbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tl432aidbvr-etched.glb tl432aidbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tl432aidbvr-etched.step tl432aidbvr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tl432aidbvr.glb Publish 0.1.0 · Ray
tl432aidbvr.kicad_mod Publish 0.1.0 · Ray
tl432aidbvr.kicad_sym Publish 0.1.0 · Ray
tl432aidbvr.lbr Publish 0.1.0 · Ray
tl432aidbvr.step Publish 0.1.0 · Ray

TL432AIDBVR

Texas Instruments · Voltage Reference · SOT-23-5

TL432AIDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection; pin 1 is not connected to the die and may be left floating.
2 ANODE power_in Common anode pin of the device; per the pin-function table this is the common return terminal, typically connected to circuit ground.
3 NC unconnected No internal connection; pin 3 is not connected to the die and may be left floating.
4 CATHODE bidirectional Shunt-regulator cathode/output terminal (parallel current/voltage input per pin table); sinks a regulated current of 1 mA to 100 mA (recommended operating range) while the cathode voltage is programmable from Vref (~2.5 V) up to 36 V (absolute max cathode voltage 37 V, absolute max continuous cathode current −100 mA to 150 mA); a minimum regulating current Imin of 0.4 mA typ 1 mA is required to keep the device in its linear region.
5 REF input Reference/threshold input measured relative to the common ANODE pin; the internal reference voltage Vref is nominally 2495 mV (2440-2550 mV range) when the device is biased, and the pin requires a reference input current Iref of at least 2 µA (typ 4 µA, max per grade) since it drives the base of an internal NPN.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference voltage Vref 2470 2495 2520 mV VKA = Vref, IKA = 10mA, TA = 25°C (TL431AI/TL432AI) 11
Reference voltage deviation over temperature range VI(dev) 14 34 mV VKA = Vref, IKA = 10mA; SOT23-3 and TL432 devices row 11
Reference voltage change ratio to cathode voltage change ΔVref/ΔVKA -1.4 -2.7 mV/V IKA = 10mA; ΔVKA = 10V - Vref 11
Reference voltage change ratio to cathode voltage change ΔVref/ΔVKA -1 -2 mV/V IKA = 10mA; ΔVKA = 36V - 10V 11
Reference input current Iref 2 4 µA IKA = 10mA, R1 = 10kΩ, R2 = ∞ 11
Reference input current deviation over temperature range II(dev) 0.8 2.5 µA IKA = 10mA, R1 = 10kΩ, R2 = ∞ 11
Minimum cathode current for regulation Imin 0.4 0.7 mA VKA = Vref 11
Off-state cathode current Ioff 0.1 0.5 µA VKA = 36V, Vref = 0 11
Dynamic impedance /ZKA/ 0.2 0.5 Ω VKA = Vref, f ≤ 1kHz, IKA = 1mA to 100mA 11
Cathode voltage VKA 36 V Recommended operating range is Vref to 36 V; the table gives no numeric minimum (minimum is Vref) 6
Continuous cathode current range IKA 1 100 mA 6
Operating free-air temperature range (TL43xxI) TA -40 85 °C TL43xxI, free-air 6
Cathode voltage VKA 37 V Referenced to ANODE 6
Continuous cathode current range IKA -100 150 mA 6
Reference input current II(ref) -0.05 10 mA 6
Operating virtual junction temperature range TJ 150 °C 6
Storage temperature range Tstg -65 150 °C 6
Junction-to-ambient thermal resistance (DBV package) RθJA 206 °C/W DBV (SOT-23-5) column of thermal table; table gives a single value 6
Junction-to-case (top) thermal resistance (DBV package) RθJC(top) 131 °C/W DBV (SOT-23-5) column of thermal table; table gives a single value 6

CAD (KiCad official)

  • Symbol: TL432AIDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tl432aidbvr-etched.step / tl432aidbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl432aidbvr.step / tl432aidbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (86 pp, sha256 313277b9351e61ed, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF