3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTL432AIDBVR
Texas Instruments · Voltage Reference · SOT-23-5
TL432AIDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; pin 1 is not connected to the die and may be left floating. |
| 2 | ANODE | power_in | Common anode pin of the device; per the pin-function table this is the common return terminal, typically connected to circuit ground. |
| 3 | NC | unconnected | No internal connection; pin 3 is not connected to the die and may be left floating. |
| 4 | CATHODE | bidirectional | Shunt-regulator cathode/output terminal (parallel current/voltage input per pin table); sinks a regulated current of 1 mA to 100 mA (recommended operating range) while the cathode voltage is programmable from Vref (~2.5 V) up to 36 V (absolute max cathode voltage 37 V, absolute max continuous cathode current −100 mA to 150 mA); a minimum regulating current Imin of 0.4 mA typ 1 mA is required to keep the device in its linear region. |
| 5 | REF | input | Reference/threshold input measured relative to the common ANODE pin; the internal reference voltage Vref is nominally 2495 mV (2440-2550 mV range) when the device is biased, and the pin requires a reference input current Iref of at least 2 µA (typ 4 µA, max per grade) since it drives the base of an internal NPN. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage | Vref | 2470 | 2495 | 2520 | mV | VKA = Vref, IKA = 10mA, TA = 25°C (TL431AI/TL432AI) | 11 |
| Reference voltage deviation over temperature range | VI(dev) | 14 | 34 | mV | VKA = Vref, IKA = 10mA; SOT23-3 and TL432 devices row | 11 | |
| Reference voltage change ratio to cathode voltage change | ΔVref/ΔVKA | -1.4 | -2.7 | mV/V | IKA = 10mA; ΔVKA = 10V - Vref | 11 | |
| Reference voltage change ratio to cathode voltage change | ΔVref/ΔVKA | -1 | -2 | mV/V | IKA = 10mA; ΔVKA = 36V - 10V | 11 | |
| Reference input current | Iref | 2 | 4 | µA | IKA = 10mA, R1 = 10kΩ, R2 = ∞ | 11 | |
| Reference input current deviation over temperature range | II(dev) | 0.8 | 2.5 | µA | IKA = 10mA, R1 = 10kΩ, R2 = ∞ | 11 | |
| Minimum cathode current for regulation | Imin | 0.4 | 0.7 | mA | VKA = Vref | 11 | |
| Off-state cathode current | Ioff | 0.1 | 0.5 | µA | VKA = 36V, Vref = 0 | 11 | |
| Dynamic impedance | /ZKA/ | 0.2 | 0.5 | Ω | VKA = Vref, f ≤ 1kHz, IKA = 1mA to 100mA | 11 | |
| Cathode voltage | VKA | 36 | V | Recommended operating range is Vref to 36 V; the table gives no numeric minimum (minimum is Vref) | 6 | ||
| Continuous cathode current range | IKA | 1 | 100 | mA | 6 | ||
| Operating free-air temperature range (TL43xxI) | TA | -40 | 85 | °C | TL43xxI, free-air | 6 | |
| Cathode voltage | VKA | 37 | V | Referenced to ANODE | 6 | ||
| Continuous cathode current range | IKA | -100 | 150 | mA | 6 | ||
| Reference input current | II(ref) | -0.05 | 10 | mA | 6 | ||
| Operating virtual junction temperature range | TJ | 150 | °C | 6 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 6 | ||
| Junction-to-ambient thermal resistance (DBV package) | RθJA | 206 | °C/W | DBV (SOT-23-5) column of thermal table; table gives a single value | 6 | ||
| Junction-to-case (top) thermal resistance (DBV package) | RθJC(top) | 131 | °C/W | DBV (SOT-23-5) column of thermal table; table gives a single value | 6 |
CAD (KiCad official)
- Symbol:
TL432AIDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tl432aidbvr-etched.step/tl432aidbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl432aidbvr.step/tl432aidbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (86 pp, sha256
313277b9351e61ed, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).