main
Ray
Publish 0.1.0
09ee266
TL431PA
PJSEMI · Voltage Reference · SOP-8
TL431PA from PJSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Cathode is the regulated output terminal, with cathode voltage limited to VREF to 36 V (absolute maximum 37 V) and cathode current limited to 1 to 100 mA in recommended operation. |
| 2 | Anode | passive | Anode is the common terminal; pins 2, 3, 6 and 7 are all labelled Anode on the SOP-8 pinout, and the datasheet gives no separate electrical limit for this pin. |
| 3 | Anode | passive | Anode is the common terminal; pins 2, 3, 6 and 7 are all labelled Anode on the SOP-8 pinout, and the datasheet gives no separate electrical limit for this pin. |
| 4 | NC | unconnected | No internal connection. |
| 5 | NC | unconnected | No internal connection. |
| 6 | Anode | passive | Anode is the common terminal; pins 2, 3, 6 and 7 are all labelled Anode on the SOP-8 pinout, and the datasheet gives no separate electrical limit for this pin. |
| 7 | Anode | passive | Anode is the common terminal; pins 2, 3, 6 and 7 are all labelled Anode on the SOP-8 pinout, and the datasheet gives no separate electrical limit for this pin. |
| 8 | Ref | input | Reference (sense) input at approximately 2.495 V, with reference input voltage 2.47 to 2.52 V for the 1% part (TL431PA) and typical reference input current of 1.5 µA (max 4 µA). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PJSEMI |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Input Voltage (TL431, 1% grade) | VREF | 2.47 | 2.495 | 2.52 | V | VKA=VREF, IKA=10mA | 4 |
| Deviation of Reference Input Voltage Over Temperature | ∆VREF | 4.5 | 17 | mV | VKA=VREF, IKA=10mA, -40°C ≤ TA ≤ +85°C | 4 | |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage | ∆VREF | -1 | -2.7 | mV/V | IKA=10mA, ∆VKA=10V~VREF | 4 | |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage | ∆VREF | -0.5 | -2 | mV/V | IKA=10mA, ∆VKA=36V~10V | 4 | |
| Reference Input Current | IREF | 1.5 | 4 | µA | IKA=10mA, R1=10KΩ, R2=∞ | 4 | |
| Deviation of Reference Input Current Over Full Temperature Range | ∆IREF | 0.4 | 1.2 | µA | IKA=10mA, R1=10KΩ, R2=∞, -20°C ≤ TA ≤ +85°C | 4 | |
| Minimum Cathode Current for Regulation | IKA(MIN) | 0.45 | 1 | mA | VKA=VREF | 4 | |
| Off-State Cathode Current | IKA(OFF) | 0.05 | 1 | µA | VKA=36V, VREF=0 | 4 | |
| Dynamic Impedance | ZKA | 0.15 | 0.5 | Ω | VKA=VREF, IKA=1~100mA, f≤1.0KHz | 4 | |
| Cathode Voltage (absolute maximum) | VKA | 37 | V | 3 | |||
| Cathode Current Range (continuous, absolute maximum) | IKA | -100 | 150 | mA | Continuous | 3 | |
| Reference Input Current Range (absolute maximum) | IREF | -0.05 | 10 | mA | 3 | ||
| Operating Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 3 | ||
| Cathode Current (recommended operating) | IKA | 1 | 100 | mA | 3 | ||
| Cathode Voltage (recommended operating, maximum) | VKA | 36 | V | 3 | |||
| Operating Ambient Temperature Range | TOPR | -40 | 125 | °C | 3 | ||
| Junction-to-Ambient Thermal Resistance (SOP-8) | RθJA | 208 | °C/W | SOP-8 package | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TL431PA - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8, generated on the KiCad land (body 4 x 5 mm, terminals on the pads, 1.45 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tl431pa-etched.step/tl431pa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl431pa.step/tl431pa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PJSEMI datasheet (10 pp, sha256
a874c1b5b375abe6, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# TL431PA
**PJSEMI** · Voltage Reference · SOP-8
TL431PA from PJSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Cathode is the regulated output terminal, with cathode voltage limited to VREF to 36 V (absolute maximum 37 V) and cathode current limited to 1 to 100 mA in recommended operation. |
| 2 | Anode | passive | Anode is the common terminal; pins 2, 3, 6 and 7 are all labelled Anode on the SOP-8 pinout, and the datasheet gives no separate electrical limit for this pin. |
| 3 | Anode | passive | Anode is the common terminal; pins 2, 3, 6 and 7 are all labelled Anode on the SOP-8 pinout, and the datasheet gives no separate electrical limit for this pin. |
| 4 | NC | unconnected | No internal connection. |
| 5 | NC | unconnected | No internal connection. |
| 6 | Anode | passive | Anode is the common terminal; pins 2, 3, 6 and 7 are all labelled Anode on the SOP-8 pinout, and the datasheet gives no separate electrical limit for this pin. |
| 7 | Anode | passive | Anode is the common terminal; pins 2, 3, 6 and 7 are all labelled Anode on the SOP-8 pinout, and the datasheet gives no separate electrical limit for this pin. |
| 8 | Ref | input | Reference (sense) input at approximately 2.495 V, with reference input voltage 2.47 to 2.52 V for the 1% part (TL431PA) and typical reference input current of 1.5 µA (max 4 µA). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PJSEMI |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Input Voltage (TL431, 1% grade) | VREF | 2.47 | 2.495 | 2.52 | V | VKA=VREF, IKA=10mA | 4 |
| Deviation of Reference Input Voltage Over Temperature | ∆VREF | | 4.5 | 17 | mV | VKA=VREF, IKA=10mA, -40°C ≤ TA ≤ +85°C | 4 |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage | ∆VREF | | -1 | -2.7 | mV/V | IKA=10mA, ∆VKA=10V~VREF | 4 |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage | ∆VREF | | -0.5 | -2 | mV/V | IKA=10mA, ∆VKA=36V~10V | 4 |
| Reference Input Current | IREF | | 1.5 | 4 | µA | IKA=10mA, R1=10KΩ, R2=∞ | 4 |
| Deviation of Reference Input Current Over Full Temperature Range | ∆IREF | | 0.4 | 1.2 | µA | IKA=10mA, R1=10KΩ, R2=∞, -20°C ≤ TA ≤ +85°C | 4 |
| Minimum Cathode Current for Regulation | IKA(MIN) | | 0.45 | 1 | mA | VKA=VREF | 4 |
| Off-State Cathode Current | IKA(OFF) | | 0.05 | 1 | µA | VKA=36V, VREF=0 | 4 |
| Dynamic Impedance | ZKA | | 0.15 | 0.5 | Ω | VKA=VREF, IKA=1~100mA, f≤1.0KHz | 4 |
| Cathode Voltage (absolute maximum) | VKA | | | 37 | V | | 3 |
| Cathode Current Range (continuous, absolute maximum) | IKA | -100 | | 150 | mA | Continuous | 3 |
| Reference Input Current Range (absolute maximum) | IREF | -0.05 | | 10 | mA | | 3 |
| Operating Junction Temperature | TJ | | | 150 | °C | | 3 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 3 |
| Cathode Current (recommended operating) | IKA | 1 | | 100 | mA | | 3 |
| Cathode Voltage (recommended operating, maximum) | VKA | | | 36 | V | | 3 |
| Operating Ambient Temperature Range | TOPR | -40 | | 125 | °C | | 3 |
| Junction-to-Ambient Thermal Resistance (SOP-8) | RθJA | | 208 | | °C/W | SOP-8 package | 3 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `TL431PA`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8, generated on the KiCad land (body 4 x 5 mm, terminals on the pads, 1.45 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tl431pa-etched.step` / `tl431pa-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tl431pa.step` / `tl431pa.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [PJSEMI datasheet](docs/tl431pa-datasheet.pdf) (10 pp, sha256 `a874c1b5b375abe6`, retrieved 2026-11-13, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/tl431pa-datasheet.pdf)