Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TL431PA

PJSEMI · Voltage Reference · SOP-8

TL431PA from PJSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 Cathode passive Cathode is the regulated output terminal, with cathode voltage limited to VREF to 36 V (absolute maximum 37 V) and cathode current limited to 1 to 100 mA in recommended operation.
2 Anode passive Anode is the common terminal; pins 2, 3, 6 and 7 are all labelled Anode on the SOP-8 pinout, and the datasheet gives no separate electrical limit for this pin.
3 Anode passive Anode is the common terminal; pins 2, 3, 6 and 7 are all labelled Anode on the SOP-8 pinout, and the datasheet gives no separate electrical limit for this pin.
4 NC unconnected No internal connection.
5 NC unconnected No internal connection.
6 Anode passive Anode is the common terminal; pins 2, 3, 6 and 7 are all labelled Anode on the SOP-8 pinout, and the datasheet gives no separate electrical limit for this pin.
7 Anode passive Anode is the common terminal; pins 2, 3, 6 and 7 are all labelled Anode on the SOP-8 pinout, and the datasheet gives no separate electrical limit for this pin.
8 Ref input Reference (sense) input at approximately 2.495 V, with reference input voltage 2.47 to 2.52 V for the 1% part (TL431PA) and typical reference input current of 1.5 µA (max 4 µA).

Key specifications

Parameter Value
Manufacturer PJSEMI
Package SOP-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference Input Voltage (TL431, 1% grade) VREF 2.47 2.495 2.52 V VKA=VREF, IKA=10mA 4
Deviation of Reference Input Voltage Over Temperature ∆VREF 4.5 17 mV VKA=VREF, IKA=10mA, -40°C ≤ TA ≤ +85°C 4
Ratio of Change in Reference Input Voltage to Change in Cathode Voltage ∆VREF -1 -2.7 mV/V IKA=10mA, ∆VKA=10V~VREF 4
Ratio of Change in Reference Input Voltage to Change in Cathode Voltage ∆VREF -0.5 -2 mV/V IKA=10mA, ∆VKA=36V~10V 4
Reference Input Current IREF 1.5 4 µA IKA=10mA, R1=10KΩ, R2=∞ 4
Deviation of Reference Input Current Over Full Temperature Range ∆IREF 0.4 1.2 µA IKA=10mA, R1=10KΩ, R2=∞, -20°C ≤ TA ≤ +85°C 4
Minimum Cathode Current for Regulation IKA(MIN) 0.45 1 mA VKA=VREF 4
Off-State Cathode Current IKA(OFF) 0.05 1 µA VKA=36V, VREF=0 4
Dynamic Impedance ZKA 0.15 0.5 Ω VKA=VREF, IKA=1~100mA, f≤1.0KHz 4
Cathode Voltage (absolute maximum) VKA 37 V 3
Cathode Current Range (continuous, absolute maximum) IKA -100 150 mA Continuous 3
Reference Input Current Range (absolute maximum) IREF -0.05 10 mA 3
Operating Junction Temperature TJ 150 °C 3
Storage Temperature Range TSTG -65 150 °C 3
Cathode Current (recommended operating) IKA 1 100 mA 3
Cathode Voltage (recommended operating, maximum) VKA 36 V 3
Operating Ambient Temperature Range TOPR -40 125 °C 3
Junction-to-Ambient Thermal Resistance (SOP-8) RθJA 208 °C/W SOP-8 package 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TL431PA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8, generated on the KiCad land (body 4 x 5 mm, terminals on the pads, 1.45 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tl431pa-etched.step / tl431pa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl431pa.step / tl431pa.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PJSEMI datasheet (10 pp, sha256 a874c1b5b375abe6, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF