main
History Download
Ray tl3016idr: specified limits as data (metadata.characteristics, 37 rows from the datasheet) be71a1f

TL3016IDR

Texas Instruments · Comparators · SOIC-8

TL3016IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC+ power_in Positive supply voltage input; the device operates from a single 5-V supply or from a split ±5-V supply.
2 IN+ input Non-inverting comparator input; differential input voltage is referenced with IN+ with respect to IN-.
3 IN- input Inverting comparator input; differential input voltage is referenced with IN+ with respect to IN-.
4 VCC- power_in Negative supply voltage input used when operating from a split ±5-V supply.
5 LATCH ENABLE input Digital control input that holds the complementary outputs in their latched state when driven high (VIH ≥ 2 V) and allows normal comparator operation when low (VIL ≤ 0.8 V); setup time is 2.5 ns typical.
6 GND power_in Ground reference terminal for the device.
7 Q OUT (complement) output Complementary digital output of the comparator, logically opposite of the Q OUT pin, designed to interface directly to TTL logic.
8 Q OUT output True digital output of the comparator, designed to interface directly to TTL logic, capable of sourcing/sinking currents up to the ±20 mA absolute maximum output current rating.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (VDD, see Note 1) VDD -7 7 V Absolute maximum; printed as '– 7 V to 7 V' 3
Differential input voltage VID 7 V Absolute maximum; IN+ with respect to IN– 3
Input voltage range VI 7 V Absolute maximum 3
Input voltage (LATCH ENABLE) VI (LATCH ENABLE) 7 V Absolute maximum 3
Output current IO -20 20 mA Absolute maximum 3
Operating free-air temperature range (TL3016I) TA -40 85 °C Absolute maximum, operating free-air temperature range 3
Storage temperature range Tstg -65 150 °C Absolute maximum 3
Lead temperature 260 °C 1,6 mm (1/16 inch) from case for 10 seconds 3
Continuous total power dissipation, D package PD 725 mW D package, TA ≤ 25°C 3
Input offset voltage VIO 0.5 3 mV TA = 25°C 4
Input offset voltage (full range) VIO 3.5 mV TA = full range 4
Input offset current IIO 0.1 0.6 µA TA = 25°C 4
Input offset current (full range) IIO 0.9 1.3 µA TA = full range 4
Input bias current IIB 6 10 µA TA = 25°C 4
Input bias current (full range) IIB 10 µA TA = full range 4
Common-mode input voltage range VICR -3.75 3.5 V VDD = ±5 V 4
Common-mode input voltage range VICR 1.25 3.5 V VDD = 5 V 4
Common-mode rejection ratio CMRR 80 97 dB –3.75 ≤ VIC ≤ 3.5 V, TA = 25°C 4
Supply-voltage rejection ratio (positive supply) kSVR 60 72 dB Positive supply: 4.6 V ≤ +VDD ≤ 5.4 V, TA = 25°C 4
Supply-voltage rejection ratio (negative supply) kSVR 80 100 dB Negative supply: –7 V ≤ –VDD ≤ –2 V, TA = 25°C 4
Low-level output voltage VOL 500 600 mV I(sink) = 4 mA, V+ ≤ 4.6 V, TA = 25°C 4
Low-level output voltage VOL 750 mV I(sink) = 10 mA, V+ ≤ 4.6 V, TA = 25°C 4
High-level output voltage VOH 3.6 3.9 V IO = 1 mA, V+ ≤ 4.6 V, TA = 25°C 4
High-level output voltage VOH 3.4 3.7 V IO = 10 mA, V+ ≤ 4.6 V, TA = 25°C 4
Positive supply current IDD 10.6 12.5 mA TA = full range 4
Negative supply current IDD -2.4 -1.3 mA TA = full range 4
Low-level input voltage (LATCH ENABLE) VIL 0.8 V LATCH ENABLE 4
High-level input voltage (LATCH ENABLE) VIH 2 V LATCH ENABLE 4
Low-level input current (LATCH ENABLE) IIL 0 1 µA VLE = 0 4
Low-level input current (LATCH ENABLE) IIL 24 45 µA VLE = 2 V 4
Propagation delay time, low-to-high/high-to-low tpd1 7.8 10 ns ΔVI = 100 mV, VOD = 5 mV, TA = 25°C 5
Propagation delay time (full range) tpd1 7.8 12.2 ns ΔVI = 100 mV, VOD = 5 mV, TA = full range 5
Propagation delay time, low-to-high/high-to-low tpd1 7.6 10 ns ΔVI = 100 mV, VOD = 20 mV, TA = 25°C 5
Propagation delay time (full range) tpd1 7.6 12.2 ns ΔVI = 100 mV, VOD = 20 mV, TA = full range 5
Input offset voltage temperature coefficient αVIO -4.5 µV/°C 4
Pulse skew (/tpd+ – tpd–/) tsk(p) 0.5 ns ΔVI = 100 mV, VOD = 5 mV, TA = 25°C 5
Setup time, LATCH ENABLE tsu 2.5 ns 5

CAD (KiCad official)

  • Symbol: TL3016IDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tl3016idr-etched.step / tl3016idr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl3016idr.step / tl3016idr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (21 pp, sha256 1bb73b2c7e90d7bd, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF