Generated by kicad-footprint-generator · KiCad file format 20260206
TL3016IDR
Texas Instruments · Comparators · SOIC-8
TL3016IDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC+ | power_in | Positive supply voltage input; the device operates from a single 5-V supply or from a split ±5-V supply. |
| 2 | IN+ | input | Non-inverting comparator input; differential input voltage is referenced with IN+ with respect to IN-. |
| 3 | IN- | input | Inverting comparator input; differential input voltage is referenced with IN+ with respect to IN-. |
| 4 | VCC- | power_in | Negative supply voltage input used when operating from a split ±5-V supply. |
| 5 | LATCH ENABLE | input | Digital control input that holds the complementary outputs in their latched state when driven high (VIH ≥ 2 V) and allows normal comparator operation when low (VIL ≤ 0.8 V); setup time is 2.5 ns typical. |
| 6 | GND | power_in | Ground reference terminal for the device. |
| 7 | Q OUT (complement) | output | Complementary digital output of the comparator, logically opposite of the Q OUT pin, designed to interface directly to TTL logic. |
| 8 | Q OUT | output | True digital output of the comparator, designed to interface directly to TTL logic, capable of sourcing/sinking currents up to the ±20 mA absolute maximum output current rating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VDD, see Note 1) | VDD | -7 | 7 | V | Absolute maximum; printed as '– 7 V to 7 V' | 3 | |
| Differential input voltage | VID | 7 | V | Absolute maximum; IN+ with respect to IN– | 3 | ||
| Input voltage range | VI | 7 | V | Absolute maximum | 3 | ||
| Input voltage (LATCH ENABLE) | VI (LATCH ENABLE) | 7 | V | Absolute maximum | 3 | ||
| Output current | IO | -20 | 20 | mA | Absolute maximum | 3 | |
| Operating free-air temperature range (TL3016I) | TA | -40 | 85 | °C | Absolute maximum, operating free-air temperature range | 3 | |
| Storage temperature range | Tstg | -65 | 150 | °C | Absolute maximum | 3 | |
| Lead temperature | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 3 | |||
| Continuous total power dissipation, D package | PD | 725 | mW | D package, TA ≤ 25°C | 3 | ||
| Input offset voltage | VIO | 0.5 | 3 | mV | TA = 25°C | 4 | |
| Input offset voltage (full range) | VIO | 3.5 | mV | TA = full range | 4 | ||
| Input offset current | IIO | 0.1 | 0.6 | µA | TA = 25°C | 4 | |
| Input offset current (full range) | IIO | 0.9 | 1.3 | µA | TA = full range | 4 | |
| Input bias current | IIB | 6 | 10 | µA | TA = 25°C | 4 | |
| Input bias current (full range) | IIB | 10 | µA | TA = full range | 4 | ||
| Common-mode input voltage range | VICR | -3.75 | 3.5 | V | VDD = ±5 V | 4 | |
| Common-mode input voltage range | VICR | 1.25 | 3.5 | V | VDD = 5 V | 4 | |
| Common-mode rejection ratio | CMRR | 80 | 97 | dB | –3.75 ≤ VIC ≤ 3.5 V, TA = 25°C | 4 | |
| Supply-voltage rejection ratio (positive supply) | kSVR | 60 | 72 | dB | Positive supply: 4.6 V ≤ +VDD ≤ 5.4 V, TA = 25°C | 4 | |
| Supply-voltage rejection ratio (negative supply) | kSVR | 80 | 100 | dB | Negative supply: –7 V ≤ –VDD ≤ –2 V, TA = 25°C | 4 | |
| Low-level output voltage | VOL | 500 | 600 | mV | I(sink) = 4 mA, V+ ≤ 4.6 V, TA = 25°C | 4 | |
| Low-level output voltage | VOL | 750 | mV | I(sink) = 10 mA, V+ ≤ 4.6 V, TA = 25°C | 4 | ||
| High-level output voltage | VOH | 3.6 | 3.9 | V | IO = 1 mA, V+ ≤ 4.6 V, TA = 25°C | 4 | |
| High-level output voltage | VOH | 3.4 | 3.7 | V | IO = 10 mA, V+ ≤ 4.6 V, TA = 25°C | 4 | |
| Positive supply current | IDD | 10.6 | 12.5 | mA | TA = full range | 4 | |
| Negative supply current | IDD | -2.4 | -1.3 | mA | TA = full range | 4 | |
| Low-level input voltage (LATCH ENABLE) | VIL | 0.8 | V | LATCH ENABLE | 4 | ||
| High-level input voltage (LATCH ENABLE) | VIH | 2 | V | LATCH ENABLE | 4 | ||
| Low-level input current (LATCH ENABLE) | IIL | 0 | 1 | µA | VLE = 0 | 4 | |
| Low-level input current (LATCH ENABLE) | IIL | 24 | 45 | µA | VLE = 2 V | 4 | |
| Propagation delay time, low-to-high/high-to-low | tpd1 | 7.8 | 10 | ns | ΔVI = 100 mV, VOD = 5 mV, TA = 25°C | 5 | |
| Propagation delay time (full range) | tpd1 | 7.8 | 12.2 | ns | ΔVI = 100 mV, VOD = 5 mV, TA = full range | 5 | |
| Propagation delay time, low-to-high/high-to-low | tpd1 | 7.6 | 10 | ns | ΔVI = 100 mV, VOD = 20 mV, TA = 25°C | 5 | |
| Propagation delay time (full range) | tpd1 | 7.6 | 12.2 | ns | ΔVI = 100 mV, VOD = 20 mV, TA = full range | 5 | |
| Input offset voltage temperature coefficient | αVIO | -4.5 | µV/°C | 4 | |||
| Pulse skew (/tpd+ – tpd–/) | tsk(p) | 0.5 | ns | ΔVI = 100 mV, VOD = 5 mV, TA = 25°C | 5 | ||
| Setup time, LATCH ENABLE | tsu | 2.5 | ns | 5 |
CAD (KiCad official)
- Symbol:
TL3016IDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tl3016idr-etched.step/tl3016idr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl3016idr.step/tl3016idr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (21 pp, sha256
1bb73b2c7e90d7bd, retrieved 2026-09-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).