TJA1081BTS

{
  "slug": "tja1081bts",
  "version": "0.1.0",
  "type": "component",
  "description": "NXP Semicon Interface - Specialized, SSOP-16-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "tja1081bts",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tja1081bts.kicad_sym",
    "tja1081bts.kicad_mod",
    "tja1081bts.glb",
    "tja1081bts.step",
    "tja1081bts.lbr",
    "docs/hero.png",
    "docs/tja1081bts-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tja1081bts-hero.glb",
    "tja1081bts-hero.overlay.json",
    "tja1081bts-etched.glb"
  ],
  "component": {
    "mpn": "TJA1081BTS",
    "manufacturer": "NXP Semicon",
    "package": "SSOP-16-208mil",
    "pin_count": 16,
    "category": "Interface ICs",
    "subcategory": "Interface - Specialized",
    "datasheet": "https://www.nxp.com/docs/en/data-sheet/TJA1081BTS.pdf",
    "parts": {
      "symbol": "tja1081bts.kicad_sym",
      "footprint": "tja1081bts.kicad_mod",
      "model_3d": "tja1081bts-hero.glb",
      "model_3d_plain": "tja1081bts-etched.glb",
      "model_3d_step": "tja1081bts-etched.step",
      "model_3d_step_plain": "tja1081bts.step",
      "lbr": "tja1081bts.lbr"
    },
    "distributor_links": {
      "lcsc": "C2674405"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T15:18:43Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "INH",
        "type": "output",
        "description": "Inhibit output for switching an external voltage regulator."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable input; enabled when HIGH, with an internal pull-down."
      },
      {
        "number": "3",
        "name": "VIO",
        "type": "power_in",
        "description": "Supply voltage for VIO voltage level adaptation to the host controller."
      },
      {
        "number": "4",
        "name": "TXD",
        "type": "input",
        "description": "Transmit data input, with an internal pull-down."
      },
      {
        "number": "5",
        "name": "TXEN",
        "type": "input",
        "description": "Transmitter enable input; when HIGH the transmitter is disabled, with an internal pull-up."
      },
      {
        "number": "6",
        "name": "RXD",
        "type": "output",
        "description": "Receive data output."
      },
      {
        "number": "7",
        "name": "BGE",
        "type": "input",
        "description": "Bus guardian enable input; when LOW the transmitter is disabled, with an internal pull-down."
      },
      {
        "number": "8",
        "name": "STBN",
        "type": "input",
        "description": "Standby input; low-power mode when LOW, with an internal pull-down."
      },
      {
        "number": "9",
        "name": "RXEN",
        "type": "output",
        "description": "Receive data enable output; when LOW, bus activity is detected."
      },
      {
        "number": "10",
        "name": "ERRN",
        "type": "output",
        "description": "Error diagnosis output; when LOW, an error is detected."
      },
      {
        "number": "11",
        "name": "VBAT",
        "type": "power_in",
        "description": "Battery supply voltage (operating range 4.75 V to 60 V)."
      },
      {
        "number": "12",
        "name": "WAKE",
        "type": "input",
        "description": "Local wake-up input; internal pull-up or pull-down depending on the voltage at pin WAKE."
      },
      {
        "number": "13",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "14",
        "name": "BM",
        "type": "bidirectional",
        "description": "Bus line minus."
      },
      {
        "number": "15",
        "name": "BP",
        "type": "bidirectional",
        "description": "Bus line plus."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage (+5 V)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 7,
        "cost_usd": 0.0129,
        "at": "2026-10-28T15:18:30"
      },
      "datasheet": {
        "url": "https://www.nxp.com/docs/en/data-sheet/TJA1081BTS.pdf",
        "pages": 45,
        "sha256": "23a531fe13d962e0",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tja1081bts.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          6.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d0e11e46aeca5dbaa5c4bb538f3f4899761267cabdeba6486325ae9e979c03ef",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tja1081bts-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          6.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "eeb9df8c369a402d2d82425c10ca5296d717d3951d05e95c22ab840212909903",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}