component
THVD1410DR
Public Made by Adomby adom
Texas Instruments RS-485 / RS-422 ICs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/thvd1410dr
b46ffc0
THVD1410DR
Texas Instruments · RS-485 / RS-422 ICs · SOIC-8
THVD1410DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | output | Receive data output; provides logic high when receiver is enabled and differential input voltage exceeds positive threshold VTH+, and logic low when voltage is below VTH-. |
| 2 | RE | input | Receiver enable input, active low with internal 2-MΩ pull-up resistor; receiver is enabled when RE is low and disabled with high-impedance output when RE is high or left open. |
| 3 | DE | input | Driver enable input, active high with internal 2-MΩ pull-down resistor; when DE is high, outputs A and B follow data input D; when DE is low, outputs turn high-impedance. |
| 4 | D | input | Driver data input; logic high at D causes A to go high and B to go low; logic low reverses the output states. |
| 5 | GND | power_in | Device ground reference connection. |
| 6 | A | bidirectional | Differential bus I/O port A, complementary to B; driven by D when driver is enabled via DE, receives differential data when receiver is enabled via RE. |
| 7 | B | bidirectional | Differential bus I/O port B, complementary to A; driven inverse to A by D when driver is enabled via DE, receives differential data when receiver is enabled via RE. |
| 8 | VCC | power_in | Power supply voltage input with operating range of 3.3 V to 5.5 V and typical supply current less than 3 mA during operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
THVD1410DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
thvd1410dr-etched.step/thvd1410dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);thvd1410dr.step/thvd1410dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (54 pp, sha256
58ecc4cc07dd1d32, retrieved 2026-09-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# THVD1410DR
**Texas Instruments** · RS-485 / RS-422 ICs · SOIC-8
THVD1410DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | output | Receive data output; provides logic high when receiver is enabled and differential input voltage exceeds positive threshold VTH+, and logic low when voltage is below VTH-. |
| 2 | RE | input | Receiver enable input, active low with internal 2-MΩ pull-up resistor; receiver is enabled when RE is low and disabled with high-impedance output when RE is high or left open. |
| 3 | DE | input | Driver enable input, active high with internal 2-MΩ pull-down resistor; when DE is high, outputs A and B follow data input D; when DE is low, outputs turn high-impedance. |
| 4 | D | input | Driver data input; logic high at D causes A to go high and B to go low; logic low reverses the output states. |
| 5 | GND | power_in | Device ground reference connection. |
| 6 | A | bidirectional | Differential bus I/O port A, complementary to B; driven by D when driver is enabled via DE, receives differential data when receiver is enabled via RE. |
| 7 | B | bidirectional | Differential bus I/O port B, complementary to A; driven inverse to A by D when driver is enabled via DE, receives differential data when receiver is enabled via RE. |
| 8 | VCC | power_in | Power supply voltage input with operating range of 3.3 V to 5.5 V and typical supply current less than 3 mA during operation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `THVD1410DR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `thvd1410dr-etched.step` / `thvd1410dr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `thvd1410dr.step` / `thvd1410dr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/thvd1410.pdf) (54 pp, sha256 `58ecc4cc07dd1d32`, retrieved 2026-09-23, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/thvd1410dr-datasheet.pdf)