← Commit history

Initial commit: component/thvd1410dr

Ray ·b46ffc03dd ·
2 files changed +185
README.mdadded+44
@@ -0,0 +1,44 @@+# THVD1410DR++**Texas Instruments** · RS-485 / RS-422 ICs · SOIC-8++THVD1410DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | R | output | Receive data output; provides logic high when receiver is enabled and differential input voltage exceeds positive threshold VTH+, and logic low when voltage is below VTH-. |+| 2 | RE | input | Receiver enable input, active low with internal 2-MΩ pull-up resistor; receiver is enabled when RE is low and disabled with high-impedance output when RE is high or left open. |+| 3 | DE | input | Driver enable input, active high with internal 2-MΩ pull-down resistor; when DE is high, outputs A and B follow data input D; when DE is low, outputs turn high-impedance. |+| 4 | D | input | Driver data input; logic high at D causes A to go high and B to go low; logic low reverses the output states. |+| 5 | GND | power_in | Device ground reference connection. |+| 6 | A | bidirectional | Differential bus I/O port A, complementary to B; driven by D when driver is enabled via DE, receives differential data when receiver is enabled via RE. |+| 7 | B | bidirectional | Differential bus I/O port B, complementary to A; driven inverse to A by D when driver is enabled via DE, receives differential data when receiver is enabled via RE. |+| 8 | VCC | power_in | Power supply voltage input with operating range of 3.3 V to 5.5 V and typical supply current less than 3 mA during operation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Interface |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `THVD1410DR`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `thvd1410dr-etched.step` / `thvd1410dr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `thvd1410dr.step` / `thvd1410dr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/thvd1410.pdf) (54 pp, sha256 `58ecc4cc07dd1d32`, retrieved 2026-09-23, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/thvd1410dr-datasheet.pdf)
page.jsonadded+141
@@ -0,0 +1,141 @@+{+  "slug": "thvd1410dr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments RS-485 / RS-422 ICs, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "thvd1410dr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "thvd1410dr.kicad_sym",+    "thvd1410dr.kicad_mod",+    "thvd1410dr.glb",+    "thvd1410dr.step",+    "thvd1410dr.lbr",+    "docs/hero.png",+    "docs/thvd1410dr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "THVD1410DR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Interface",+    "subcategory": "RS-485 / RS-422 ICs",+    "datasheet": "https://www.ti.com/lit/ds/symlink/thvd1410.pdf",+    "parts": {+      "symbol": "thvd1410dr.kicad_sym",+      "footprint": "thvd1410dr.kicad_mod",+      "model_3d": "thvd1410dr-etched.glb",+      "model_3d_plain": "thvd1410dr.glb",+      "model_3d_step": "thvd1410dr-etched.step",+      "model_3d_step_plain": "thvd1410dr.step",+      "lbr": "thvd1410dr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2671345"+    },+    "pins": [+      {+        "number": "1",+        "name": "R",+        "type": "output",+        "description": "Receive data output; provides logic high when receiver is enabled and differential input voltage exceeds positive threshold VTH+, and logic low when voltage is below VTH-."+      },+      {+        "number": "2",+        "name": "RE",+        "type": "input",+        "description": "Receiver enable input, active low with internal 2-MΩ pull-up resistor; receiver is enabled when RE is low and disabled with high-impedance output when RE is high or left open."+      },+      {+        "number": "3",+        "name": "DE",+        "type": "input",+        "description": "Driver enable input, active high with internal 2-MΩ pull-down resistor; when DE is high, outputs A and B follow data input D; when DE is low, outputs turn high-impedance."+      },+      {+        "number": "4",+        "name": "D",+        "type": "input",+        "description": "Driver data input; logic high at D causes A to go high and B to go low; logic low reverses the output states."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference connection."+      },+      {+        "number": "6",+        "name": "A",+        "type": "bidirectional",+        "description": "Differential bus I/O port A, complementary to B; driven by D when driver is enabled via DE, receives differential data when receiver is enabled via RE."+      },+      {+        "number": "7",+        "name": "B",+        "type": "bidirectional",+        "description": "Differential bus I/O port B, complementary to A; driven inverse to A by D when driver is enabled via DE, receives differential data when receiver is enabled via RE."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Power supply voltage input with operating range of 3.3 V to 5.5 V and typical supply current less than 3 mA during operation."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 54,+        "cost_usd": 0.3992,+        "at": "2026-09-23T01:30:56"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/thvd1410.pdf",+        "pages": 54,+        "sha256": "58ecc4cc07dd1d32",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file