component
THS7001IPWP
Public Made by Adomby adom
Texas Instruments Operational Amplifier, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTHS7001IPWP
Texas Instruments · Operational Amplifier · HTSSOP-20-EP
THS7001IPWP from Texas Instruments, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin of the THS7001, shared by the PGA. |
| 2 | VREFPGA | power_in | Reference input of the programmable gain amplifier. |
| 3 | -VIN PGA | input | Inverting input of the inverting programmable gain amplifier (PGA IN−). |
| 4 | VOUTPre-AMP | output | Preamp output, accessible so external filtering or gain-setting resistors can be added between the preamp and the PGA. |
| 5 | -VIN Pre-Amp | input | Inverting input of the low-noise voltage-feedback preamp (1.7 nV/√Hz, minimum gain of 2 or −1). |
| 6 | +VINPre-Amp | input | Non-inverting input of the low-noise voltage-feedback preamp. |
| 7 | VCC- Pre-Amp | power_in | Negative supply of the preamp; the device operates from ±4.5 V to ±16 V supplies. |
| 8 | VCC+Pre-Amp | power_in | Positive supply of the preamp; the device operates from ±4.5 V to ±16 V supplies. |
| 9 | Spare/NC | unconnected | Spare pin, no connection. |
| 10 | Spare/NC | unconnected | Spare pin, no connection. |
| 11 | Spare/NC | unconnected | Spare pin, no connection. |
| 12 | VH | input | Positive output clamp level (CLAMP+) for the PGA output, preventing it from swinging outside the ADC common-mode input range. |
| 13 | VCC+PGA | power_in | Positive supply of the PGA; the device operates from ±4.5 V to ±16 V supplies. |
| 14 | VCC- PGA | power_in | Negative supply of the PGA; the device operates from ±4.5 V to ±16 V supplies. |
| 15 | VL | input | Negative output clamp level (CLAMP−) for the PGA output, preventing it from swinging outside the ADC common-mode input range. |
| 16 | VOUTPGA | output | Output of the programmable gain amplifier, with −22 dB to 20 dB gain range and high/low clamp protection. |
| 17 | SHDN | input | Shutdown control for power conservation and multiplexing. |
| 18 | G2 | input | Most significant bit of the TTL-compatible 3-bit PGA gain control (gain 2 to 20 dB when high). |
| 19 | G1 | input | Middle bit of the TTL-compatible 3-bit PGA gain control with 6 dB steps. |
| 20 | G0 | input | Least significant bit of the TTL-compatible 3-bit PGA gain control with 6 dB steps (000 = −22 dB, 111 = 20 dB). |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-20-EP |
| Category | Amplifiers |
| Pins | 21 |
CAD (KiCad official)
- Symbol:
THS7001IPWP - Footprint:
Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm - 3D model: HTSSOP-20-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm nominal TSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
ths7001ipwp-etched.step/ths7001ipwp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ths7001ipwp.step/ths7001ipwp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
8d73a37075d2c619, retrieved 2026-10-22, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).