main
Ray
Publish 0.1.0
6b77f8f
THS2630DGNR
Texas Instruments · Differential Amplifiers · HVSSOP-8
THS2630DGNR from Texas Instruments, in a HVSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Negative (inverting) input pin; the differential input voltage is limited to ±1.5 V and the continuous input current to 10 mA (absolute maximum ratings). |
| 2 | VOCM | input | Common-mode input pin that sets the output common-mode voltage when driven from a low-impedance source, and defaults to mid-rail (VCC+ + VCC−)/2 when left floating. |
| 3 | VCC+ | power_in | Positive supply voltage pin; recommended supply is ±2.5 V to ±17.5 V dual or 5 V to 35 V single, with a 37 V absolute maximum for VCC− to VCC+, and it should be decoupled to GND close to the device. |
| 4 | OUT+ | output | Positive output pin; output current is limited to 150 mA absolute maximum. |
| 5 | OUT- | output | Negative output pin; output current is limited to 150 mA absolute maximum, and capacitive loads above 10 pF should use a series resistor of at least 20 Ω. |
| 6 | VCC- | power_in | Negative supply voltage pin; it should be decoupled to GND with a low-inductance ceramic capacitor (about 10 nF) placed as close to the device as possible. |
| 7 | NC | unconnected | Not internally connected on the THS2630; leave floating or connect to any other pin on the device. |
| 8 | IN+ | input | Positive (non-inverting) input pin; the differential input voltage is limited to ±1.5 V and the input voltage must stay within the supply rails (absolute maximum ratings). |
| 9 | Thermal pad | passive | Exposed thermal pad on the DGN (HVSSOP) package; connect it to a large copper plane for best thermal performance, and keep its voltage between VCC+ and VCC−. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, dual supply | VCC | 2.5 | 17.5 | V | Dual supply | 4 | |
| Supply voltage, single supply | VCC | 5 | 35 | V | Single supply | 4 | |
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Supply voltage VCC- to VCC+ | VCC- to VCC+ | 37 | V | 4 | |||
| Supply turn on and turn off dV/dT | dV/dT | 1.7 | V/µs | 4 | |||
| Output current | IO | 150 | mA | 4 | |||
| Differential input voltage | VID | -1.5 | 1.5 | V | 4 | ||
| Continuous input current | IIN | 10 | mA | 4 | |||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Junction temperature, continuous operation, long-term reliability | TJ | 125 | °C | 4 | |||
| Ambient temperature | TA | 0 | 85 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Open-loop gain | AOL | 91 | 95 | dB | TA = 25°C | 6 | |
| Open-loop gain | AOL | 85 | dB | TA = full range | 6 | ||
| Input offset voltage | VOS | -1.3 | 0.1 | 1.3 | mV | TA = 25°C | 6 |
| Input offset voltage | VOS | 1.5 | mV | TA = full range | 6 | ||
| Input offset voltage drift | 0.8 | 3.2 | µV/°C | TA = full range | 6 | ||
| Input bias current | IIB | 4.8 | 9.8 | µA | TA = 25℃ | 6 | |
| Input bias current | IIB | 4.8 | 15.1 | µA | TA = full range | 6 | |
| Input offset current | IOS | -250 | 22 | 350 | nA | TA = 25℃ | 6 |
| Input offset current | IOS | 400 | nA | TA = full range | 6 | ||
| Common-mode rejection ratio | CMRR | 81 | 95 | dB | TA = 25℃ | 6 | |
| Common-mode input voltage | VICM | -4 | 4.5 | V | 6 | ||
| Output voltage swing | 13.1 | 13.4 | V | VCC = ±15 V, RL = 1 kΩ, TA = 25°C | 7 | ||
| Output voltage swing | 12.9 | V | VCC = ±15 V, RL = 1 kΩ, TA = full range | 7 | |||
| Output current | IO | 25 | 45 | mA | VCC = 5 V, RL = 7 Ω, TA = 25°C | 7 | |
| Output current | IO | 20 | mA | VCC = 5 V, RL = 7 Ω, TA = full range | 7 | ||
| Output current | IO | 30 | 55 | mA | VCC = ±5 V, RL = 7 Ω, TA = 25°C | 7 | |
| Output current | IO | 28 | mA | VCC = ±5 V, RL = 7 Ω, TA = full range | 7 | ||
| Output current | IO | 65 | 85 | mA | VCC = ±15 V, RL = 7 Ω, TA = 25°C | 7 | |
| Output current | IO | 60 | mA | VCC = ±15 V, RL = 7 Ω, TA = full range | 7 | ||
| Quiescent current | IQ | 8.9 | 10.5 | mA | VCC = ±5 V, TA = 25°C | 7 | |
| Quiescent current | IQ | 12.4 | mA | VCC = ±5 V, TA = full range | 7 | ||
| Quiescent current | IQ | 11 | 13.2 | mA | VCC = ±15 V | 7 | |
| Power-supply rejection ratio | PSRR | 76 | 98 | dB | 7 | ||
| VOCM offset voltage | -2.7 | 0.2 | 2.7 | mV | VOCM driven to midsupply | 7 | |
| Default VOCM offset | -10 | 0.65 | 10 | mV | Relative to midsupply, VOCM pin floating | 7 | |
| VOCM input range low | -4.1 | -4 | V | VCC = ±5 V | 7 | ||
| VOCM input range high | 3.5 | 3.8 | V | VCC = ±5 V | 7 | ||
| Junction-to-ambient thermal resistance | RθJA | 57.6 | °C/W | DGN (HVSSOP), 8 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 76.3 | °C/W | DGN (HVSSOP), 8 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 30 | °C/W | DGN (HVSSOP), 8 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 4 | °C/W | DGN (HVSSOP), 8 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 29.9 | °C/W | DGN (HVSSOP), 8 pins | 4 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 14.3 | °C/W | DGN (HVSSOP), 8 pins | 4 |
CAD (KiCad official)
- Symbol:
THS2630DGNR - Footprint:
Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm - 3D model: HVSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ths2630dgnr-etched.step/ths2630dgnr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ths2630dgnr.step/ths2630dgnr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
ce8c9cc5ffd5ab0d, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# THS2630DGNR
**Texas Instruments** · Differential Amplifiers · HVSSOP-8
THS2630DGNR from Texas Instruments, in a HVSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Negative (inverting) input pin; the differential input voltage is limited to ±1.5 V and the continuous input current to 10 mA (absolute maximum ratings). |
| 2 | VOCM | input | Common-mode input pin that sets the output common-mode voltage when driven from a low-impedance source, and defaults to mid-rail (VCC+ + VCC−)/2 when left floating. |
| 3 | VCC+ | power_in | Positive supply voltage pin; recommended supply is ±2.5 V to ±17.5 V dual or 5 V to 35 V single, with a 37 V absolute maximum for VCC− to VCC+, and it should be decoupled to GND close to the device. |
| 4 | OUT+ | output | Positive output pin; output current is limited to 150 mA absolute maximum. |
| 5 | OUT- | output | Negative output pin; output current is limited to 150 mA absolute maximum, and capacitive loads above 10 pF should use a series resistor of at least 20 Ω. |
| 6 | VCC- | power_in | Negative supply voltage pin; it should be decoupled to GND with a low-inductance ceramic capacitor (about 10 nF) placed as close to the device as possible. |
| 7 | NC | unconnected | Not internally connected on the THS2630; leave floating or connect to any other pin on the device. |
| 8 | IN+ | input | Positive (non-inverting) input pin; the differential input voltage is limited to ±1.5 V and the input voltage must stay within the supply rails (absolute maximum ratings). |
| 9 | Thermal pad | passive | Exposed thermal pad on the DGN (HVSSOP) package; connect it to a large copper plane for best thermal performance, and keep its voltage between VCC+ and VCC−. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, dual supply | VCC | 2.5 | | 17.5 | V | Dual supply | 4 |
| Supply voltage, single supply | VCC | 5 | | 35 | V | Single supply | 4 |
| Operating free-air temperature | TA | -40 | | 85 | °C | | 4 |
| Supply voltage VCC- to VCC+ | VCC- to VCC+ | | | 37 | V | | 4 |
| Supply turn on and turn off dV/dT | dV/dT | | | 1.7 | V/µs | | 4 |
| Output current | IO | | | 150 | mA | | 4 |
| Differential input voltage | VID | -1.5 | | 1.5 | V | | 4 |
| Continuous input current | IIN | | | 10 | mA | | 4 |
| Junction temperature | TJ | | | 150 | °C | | 4 |
| Junction temperature, continuous operation, long-term reliability | TJ | | | 125 | °C | | 4 |
| Ambient temperature | TA | 0 | | 85 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Open-loop gain | AOL | 91 | 95 | | dB | TA = 25°C | 6 |
| Open-loop gain | AOL | 85 | | | dB | TA = full range | 6 |
| Input offset voltage | VOS | -1.3 | 0.1 | 1.3 | mV | TA = 25°C | 6 |
| Input offset voltage | VOS | | | 1.5 | mV | TA = full range | 6 |
| Input offset voltage drift | | | 0.8 | 3.2 | µV/°C | TA = full range | 6 |
| Input bias current | IIB | | 4.8 | 9.8 | µA | TA = 25℃ | 6 |
| Input bias current | IIB | | 4.8 | 15.1 | µA | TA = full range | 6 |
| Input offset current | IOS | -250 | 22 | 350 | nA | TA = 25℃ | 6 |
| Input offset current | IOS | | | 400 | nA | TA = full range | 6 |
| Common-mode rejection ratio | CMRR | 81 | 95 | | dB | TA = 25℃ | 6 |
| Common-mode input voltage | VICM | -4 | | 4.5 | V | | 6 |
| Output voltage swing | | 13.1 | 13.4 | | V | VCC = ±15 V, RL = 1 kΩ, TA = 25°C | 7 |
| Output voltage swing | | 12.9 | | | V | VCC = ±15 V, RL = 1 kΩ, TA = full range | 7 |
| Output current | IO | 25 | 45 | | mA | VCC = 5 V, RL = 7 Ω, TA = 25°C | 7 |
| Output current | IO | 20 | | | mA | VCC = 5 V, RL = 7 Ω, TA = full range | 7 |
| Output current | IO | 30 | 55 | | mA | VCC = ±5 V, RL = 7 Ω, TA = 25°C | 7 |
| Output current | IO | 28 | | | mA | VCC = ±5 V, RL = 7 Ω, TA = full range | 7 |
| Output current | IO | 65 | 85 | | mA | VCC = ±15 V, RL = 7 Ω, TA = 25°C | 7 |
| Output current | IO | 60 | | | mA | VCC = ±15 V, RL = 7 Ω, TA = full range | 7 |
| Quiescent current | IQ | | 8.9 | 10.5 | mA | VCC = ±5 V, TA = 25°C | 7 |
| Quiescent current | IQ | | | 12.4 | mA | VCC = ±5 V, TA = full range | 7 |
| Quiescent current | IQ | | 11 | 13.2 | mA | VCC = ±15 V | 7 |
| Power-supply rejection ratio | PSRR | 76 | 98 | | dB | | 7 |
| VOCM offset voltage | | -2.7 | 0.2 | 2.7 | mV | VOCM driven to midsupply | 7 |
| Default VOCM offset | | -10 | 0.65 | 10 | mV | Relative to midsupply, VOCM pin floating | 7 |
| VOCM input range low | | -4.1 | -4 | | V | VCC = ±5 V | 7 |
| VOCM input range high | | 3.5 | 3.8 | | V | VCC = ±5 V | 7 |
| Junction-to-ambient thermal resistance | RθJA | | 57.6 | | °C/W | DGN (HVSSOP), 8 pins | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 76.3 | | °C/W | DGN (HVSSOP), 8 pins | 4 |
| Junction-to-board thermal resistance | RθJB | | 30 | | °C/W | DGN (HVSSOP), 8 pins | 4 |
| Junction-to-top characterization parameter | ψJT | | 4 | | °C/W | DGN (HVSSOP), 8 pins | 4 |
| Junction-to-board characterization parameter | ψJB | | 29.9 | | °C/W | DGN (HVSSOP), 8 pins | 4 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 14.3 | | °C/W | DGN (HVSSOP), 8 pins | 4 |
## CAD (KiCad official)
- Symbol: `THS2630DGNR`
- Footprint: `Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm`
- 3D model: HVSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `ths2630dgnr-etched.step` / `ths2630dgnr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ths2630dgnr.step` / `ths2630dgnr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ths2630.pdf) (37 pp, sha256 `ce8c9cc5ffd5ab0d`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ths2630dgnr-datasheet.pdf)