main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ths2630dgnr: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
ths2630dgnr-etched.glb Publish 0.1.0 · Ray
ths2630dgnr-etched.step ths2630dgnr: factory component page (tier=mfr) · Ray
ths2630dgnr-hero.glb ths2630dgnr: hero GLB from the etched model (keeps the MPN mark) · Ray
ths2630dgnr-hero.overlay.json Publish 0.1.0 · Ray
ths2630dgnr.glb Publish 0.1.0 · Ray
ths2630dgnr.kicad_mod Publish 0.1.0 · Ray
ths2630dgnr.kicad_sym Publish 0.1.0 · Ray
ths2630dgnr.lbr Publish 0.1.0 · Ray
ths2630dgnr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 9 pins · Ray

THS2630DGNR

Texas Instruments · Differential Amplifiers · HVSSOP-8

THS2630DGNR from Texas Instruments, in a HVSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN- input Negative (inverting) input pin; the differential input voltage is limited to ±1.5 V and the continuous input current to 10 mA (absolute maximum ratings).
2 VOCM input Common-mode input pin that sets the output common-mode voltage when driven from a low-impedance source, and defaults to mid-rail (VCC+ + VCC−)/2 when left floating.
3 VCC+ power_in Positive supply voltage pin; recommended supply is ±2.5 V to ±17.5 V dual or 5 V to 35 V single, with a 37 V absolute maximum for VCC− to VCC+, and it should be decoupled to GND close to the device.
4 OUT+ output Positive output pin; output current is limited to 150 mA absolute maximum.
5 OUT- output Negative output pin; output current is limited to 150 mA absolute maximum, and capacitive loads above 10 pF should use a series resistor of at least 20 Ω.
6 VCC- power_in Negative supply voltage pin; it should be decoupled to GND with a low-inductance ceramic capacitor (about 10 nF) placed as close to the device as possible.
7 NC unconnected Not internally connected on the THS2630; leave floating or connect to any other pin on the device.
8 IN+ input Positive (non-inverting) input pin; the differential input voltage is limited to ±1.5 V and the input voltage must stay within the supply rails (absolute maximum ratings).
9 Thermal pad passive Exposed thermal pad on the DGN (HVSSOP) package; connect it to a large copper plane for best thermal performance, and keep its voltage between VCC+ and VCC−.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HVSSOP-8
Category Amplifiers/Comparators
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, dual supply VCC 2.5 17.5 V Dual supply 4
Supply voltage, single supply VCC 5 35 V Single supply 4
Operating free-air temperature TA -40 85 °C 4
Supply voltage VCC- to VCC+ VCC- to VCC+ 37 V 4
Supply turn on and turn off dV/dT dV/dT 1.7 V/µs 4
Output current IO 150 mA 4
Differential input voltage VID -1.5 1.5 V 4
Continuous input current IIN 10 mA 4
Junction temperature TJ 150 °C 4
Junction temperature, continuous operation, long-term reliability TJ 125 °C 4
Ambient temperature TA 0 85 °C 4
Storage temperature Tstg -65 150 °C 4
Open-loop gain AOL 91 95 dB TA = 25°C 6
Open-loop gain AOL 85 dB TA = full range 6
Input offset voltage VOS -1.3 0.1 1.3 mV TA = 25°C 6
Input offset voltage VOS 1.5 mV TA = full range 6
Input offset voltage drift 0.8 3.2 µV/°C TA = full range 6
Input bias current IIB 4.8 9.8 µA TA = 25℃ 6
Input bias current IIB 4.8 15.1 µA TA = full range 6
Input offset current IOS -250 22 350 nA TA = 25℃ 6
Input offset current IOS 400 nA TA = full range 6
Common-mode rejection ratio CMRR 81 95 dB TA = 25℃ 6
Common-mode input voltage VICM -4 4.5 V 6
Output voltage swing 13.1 13.4 V VCC = ±15 V, RL = 1 kΩ, TA = 25°C 7
Output voltage swing 12.9 V VCC = ±15 V, RL = 1 kΩ, TA = full range 7
Output current IO 25 45 mA VCC = 5 V, RL = 7 Ω, TA = 25°C 7
Output current IO 20 mA VCC = 5 V, RL = 7 Ω, TA = full range 7
Output current IO 30 55 mA VCC = ±5 V, RL = 7 Ω, TA = 25°C 7
Output current IO 28 mA VCC = ±5 V, RL = 7 Ω, TA = full range 7
Output current IO 65 85 mA VCC = ±15 V, RL = 7 Ω, TA = 25°C 7
Output current IO 60 mA VCC = ±15 V, RL = 7 Ω, TA = full range 7
Quiescent current IQ 8.9 10.5 mA VCC = ±5 V, TA = 25°C 7
Quiescent current IQ 12.4 mA VCC = ±5 V, TA = full range 7
Quiescent current IQ 11 13.2 mA VCC = ±15 V 7
Power-supply rejection ratio PSRR 76 98 dB 7
VOCM offset voltage -2.7 0.2 2.7 mV VOCM driven to midsupply 7
Default VOCM offset -10 0.65 10 mV Relative to midsupply, VOCM pin floating 7
VOCM input range low -4.1 -4 V VCC = ±5 V 7
VOCM input range high 3.5 3.8 V VCC = ±5 V 7
Junction-to-ambient thermal resistance RθJA 57.6 °C/W DGN (HVSSOP), 8 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 76.3 °C/W DGN (HVSSOP), 8 pins 4
Junction-to-board thermal resistance RθJB 30 °C/W DGN (HVSSOP), 8 pins 4
Junction-to-top characterization parameter ψJT 4 °C/W DGN (HVSSOP), 8 pins 4
Junction-to-board characterization parameter ψJB 29.9 °C/W DGN (HVSSOP), 8 pins 4
Junction-to-case (bottom) thermal resistance RθJC(bot) 14.3 °C/W DGN (HVSSOP), 8 pins 4

CAD (KiCad official)

  • Symbol: THS2630DGNR
  • Footprint: Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm
  • 3D model: HVSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ths2630dgnr-etched.step / ths2630dgnr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ths2630dgnr.step / ths2630dgnr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 ce8c9cc5ffd5ab0d, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF