main
Ray
Publish 0.1.0
1f05454
THN 15-2415WIR
Traco Power · Power Supplies - Board Mount · 6-DIP Module
THN 15-2415WIR from Traco Power, in a 6-DIP Module. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +Vin (Vcc) | power_in | Positive input supply for the 9-36 VDC input range of this 24 VDC nominal model, with under-voltage lockout at 7.5 VDC min. to 8.8 VDC max. |
| 2 | -Vin (GND) | power_in | Negative input supply connection (GND) for the 9-36 VDC input, which is also the reference for the Remote On/Off pin. |
| 3 | +Vout | power_out | Positive regulated output of 24 VDC nominal at up to 625 mA for this model. |
| 4 | Trim | input | Output voltage adjustment input for single output models, allowing -10% to +20% for 15 and 24 VDC models via an external trim resistor. |
| 5 | -Vout | power_out | Negative output connection, the return for the +Vout regulated output. |
| 6 | Remote On/Off | input | Remote On/Off control referred to -Vin: on at 3.0 to 15 VDC or open circuit, off at 0 to 1.2 VDC or short circuit. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Traco Power |
| Package | 6-DIP Module |
| Category | Power Supplies - Board Mount |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 9 | 36 | VDC | 24 VDC nom. models | 1 | |
| Surge Voltage | 50 | VDC | 24 Vin models, 1 s max. | 2 | |||
| Under Voltage Lockout | 7.5 | 8 | 8.8 | VDC | 24 Vin models | 2 | |
| Input Current | 12 | mA | At no load, 24 Vin models | 2 | |||
| Efficiency | 91 | % | Output 24 VDC | 1 | |||
| Output Current | Imax | 625 | mA | 24 VDC output, single output | 1 | ||
| Voltage Set Accuracy | -1 | 1 | % | 2 | |||
| Output Voltage Adjustment | -10 | 20 | % | 15 & 24 VDC models, single output models only, by external trim resistor | 2 | ||
| Regulation Input Variation | 0.2 | % | single output models, Vmin-Vmax | 2 | |||
| Regulation Load Variation | 0.2 | % | single output models, 0-100% load | 2 | |||
| Ripple and Noise | 125 | mVp-p | 24 Vout, 20 MHz bandwidth, w/ 2.2 µF, 50 V X7R | 2 | |||
| Temperature Coefficient | -0.02 | 0.02 | %/K | 3 | |||
| Capacitive Load | 200 | µF | 24 Vout models, single output | 3 | |||
| Hold-up Time | 10 | ms | acc. to EN 50155 Class S2 | 3 | |||
| Start-up Time | 30 | 40 | ms | 3 | |||
| Output Current Limitation | 145 | 170 | 212 | % | of Iout max. | 3 | |
| Overvoltage Protection | 112 | 164 | % | of Vout nom. | 3 | ||
| Transient Response Response Time | 250 | µs | 25% load step | 3 | |||
| Remote On | 3 | 15 | VDC | Remote On/Off pin on, or open circuit, refers to Remote and -Vin pin | 4 | ||
| Remote Off | 0 | 1.2 | VDC | Remote off, or short circuit, refers to Remote and -Vin pin | 4 | ||
| Off Idle Input Current | 2.5 | mA | 4 | ||||
| Remote Pin Input Current | -0.5 | 1 | mA | 4 | |||
| Operating Temperature | -40 | 90 | °C | without heatsink | 4 | ||
| Case Temperature | 105 | °C | 4 | ||||
| Storage Temperature | -55 | 125 | °C | 4 | |||
| Relative Humidity | 95 | % | non condensing | 4 | |||
| Switching Frequency | 300 | kHz | PWM, other models (±10%) | 4 | |||
| Isolation Resistance | 1000 | MΩ | Input to output, 500 VDC | 4 | |||
| Thermal Impedance Case to Ambient | 17 | K/W | no heatsink | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | Pin Material Copper | 4 |
CAD (Adom-generated)
- Symbol:
THN 15-2415WIR - Footprint:
Adom_Gen:Traco_Power_THN_15-2_a3be30 - 3D model: generated to fit the land (STEP)
- 3D model files:
thn-15-2415wir-etched.step/thn-15-2415wir-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);thn-15-2415wir.step/thn-15-2415wir.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Traco Power datasheet (5 pp, sha256
cc13ceb9242e3e7e, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
# THN 15-2415WIR
**Traco Power** · Power Supplies - Board Mount · 6-DIP Module
THN 15-2415WIR from Traco Power, in a 6-DIP Module. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +Vin (Vcc) | power_in | Positive input supply for the 9-36 VDC input range of this 24 VDC nominal model, with under-voltage lockout at 7.5 VDC min. to 8.8 VDC max. |
| 2 | -Vin (GND) | power_in | Negative input supply connection (GND) for the 9-36 VDC input, which is also the reference for the Remote On/Off pin. |
| 3 | +Vout | power_out | Positive regulated output of 24 VDC nominal at up to 625 mA for this model. |
| 4 | Trim | input | Output voltage adjustment input for single output models, allowing -10% to +20% for 15 and 24 VDC models via an external trim resistor. |
| 5 | -Vout | power_out | Negative output connection, the return for the +Vout regulated output. |
| 6 | Remote On/Off | input | Remote On/Off control referred to -Vin: on at 3.0 to 15 VDC or open circuit, off at 0 to 1.2 VDC or short circuit. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Traco Power |
| Package | 6-DIP Module |
| Category | Power Supplies - Board Mount |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 9 | | 36 | VDC | 24 VDC nom. models | 1 |
| Surge Voltage | | | | 50 | VDC | 24 Vin models, 1 s max. | 2 |
| Under Voltage Lockout | | 7.5 | 8 | 8.8 | VDC | 24 Vin models | 2 |
| Input Current | | | 12 | | mA | At no load, 24 Vin models | 2 |
| Efficiency | | | 91 | | % | Output 24 VDC | 1 |
| Output Current | Imax | | | 625 | mA | 24 VDC output, single output | 1 |
| Voltage Set Accuracy | | -1 | | 1 | % | | 2 |
| Output Voltage Adjustment | | -10 | | 20 | % | 15 & 24 VDC models, single output models only, by external trim resistor | 2 |
| Regulation Input Variation | | | | 0.2 | % | single output models, Vmin-Vmax | 2 |
| Regulation Load Variation | | | | 0.2 | % | single output models, 0-100% load | 2 |
| Ripple and Noise | | | 125 | | mVp-p | 24 Vout, 20 MHz bandwidth, w/ 2.2 µF, 50 V X7R | 2 |
| Temperature Coefficient | | -0.02 | | 0.02 | %/K | | 3 |
| Capacitive Load | | | | 200 | µF | 24 Vout models, single output | 3 |
| Hold-up Time | | 10 | | | ms | acc. to EN 50155 Class S2 | 3 |
| Start-up Time | | | 30 | 40 | ms | | 3 |
| Output Current Limitation | | 145 | 170 | 212 | % | of Iout max. | 3 |
| Overvoltage Protection | | 112 | | 164 | % | of Vout nom. | 3 |
| Transient Response Response Time | | | 250 | | µs | 25% load step | 3 |
| Remote On | | 3 | | 15 | VDC | Remote On/Off pin on, or open circuit, refers to Remote and -Vin pin | 4 |
| Remote Off | | 0 | | 1.2 | VDC | Remote off, or short circuit, refers to Remote and -Vin pin | 4 |
| Off Idle Input Current | | | 2.5 | | mA | | 4 |
| Remote Pin Input Current | | -0.5 | | 1 | mA | | 4 |
| Operating Temperature | | -40 | | 90 | °C | without heatsink | 4 |
| Case Temperature | | | | 105 | °C | | 4 |
| Storage Temperature | | -55 | | 125 | °C | | 4 |
| Relative Humidity | | | | 95 | % | non condensing | 4 |
| Switching Frequency | | | 300 | | kHz | PWM, other models (±10%) | 4 |
| Isolation Resistance | | 1000 | | | MΩ | Input to output, 500 VDC | 4 |
| Thermal Impedance Case to Ambient | | | 17 | | K/W | no heatsink | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | | Pin Material Copper | 4 |
## CAD (Adom-generated)
- Symbol: `THN 15-2415WIR`
- Footprint: `Adom_Gen:Traco_Power_THN_15-2_a3be30`
- 3D model: generated to fit the land (STEP)
- 3D model files: `thn-15-2415wir-etched.step` / `thn-15-2415wir-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `thn-15-2415wir.step` / `thn-15-2415wir.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Traco Power datasheet](https://www.tracopower.com/products/thn15wir.pdf) (5 pp, sha256 `cc13ceb9242e3e7e`, retrieved 2026-11-16, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
[Datasheet PDF](docs/thn-15-2415wir-datasheet.pdf)