main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers thn-15-2415wir: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
thn-15-2415wir-etched.glb thn-15-2415wir: factory component page (tier=mfr) · Ray
thn-15-2415wir-etched.step thn-15-2415wir: factory component page (tier=mfr) · Ray
thn-15-2415wir-hero.glb thn-15-2415wir: hero GLB from the etched model (keeps the MPN mark) · Ray
thn-15-2415wir-hero.overlay.json thn-15-2415wir: hero GLB from the etched model (keeps the MPN mark) · Ray
thn-15-2415wir.glb Publish 0.1.0 · Ray
thn-15-2415wir.kicad_mod Publish 0.1.0 · Ray
thn-15-2415wir.kicad_sym Publish 0.1.0 · Ray
thn-15-2415wir.lbr Publish 0.1.0 · Ray
thn-15-2415wir.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

THN 15-2415WIR

Traco Power · Power Supplies - Board Mount · 6-DIP Module

THN 15-2415WIR from Traco Power, in a 6-DIP Module. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 +Vin (Vcc) power_in Positive input supply for the 9-36 VDC input range of this 24 VDC nominal model, with under-voltage lockout at 7.5 VDC min. to 8.8 VDC max.
2 -Vin (GND) power_in Negative input supply connection (GND) for the 9-36 VDC input, which is also the reference for the Remote On/Off pin.
3 +Vout power_out Positive regulated output of 24 VDC nominal at up to 625 mA for this model.
4 Trim input Output voltage adjustment input for single output models, allowing -10% to +20% for 15 and 24 VDC models via an external trim resistor.
5 -Vout power_out Negative output connection, the return for the +Vout regulated output.
6 Remote On/Off input Remote On/Off control referred to -Vin: on at 3.0 to 15 VDC or open circuit, off at 0 to 1.2 VDC or short circuit.

Key specifications

Parameter Value
Manufacturer Traco Power
Package 6-DIP Module
Category Power Supplies - Board Mount
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage Range VIN 9 36 VDC 24 VDC nom. models 1
Surge Voltage 50 VDC 24 Vin models, 1 s max. 2
Under Voltage Lockout 7.5 8 8.8 VDC 24 Vin models 2
Input Current 12 mA At no load, 24 Vin models 2
Efficiency 91 % Output 24 VDC 1
Output Current Imax 625 mA 24 VDC output, single output 1
Voltage Set Accuracy -1 1 % 2
Output Voltage Adjustment -10 20 % 15 & 24 VDC models, single output models only, by external trim resistor 2
Regulation Input Variation 0.2 % single output models, Vmin-Vmax 2
Regulation Load Variation 0.2 % single output models, 0-100% load 2
Ripple and Noise 125 mVp-p 24 Vout, 20 MHz bandwidth, w/ 2.2 µF, 50 V X7R 2
Temperature Coefficient -0.02 0.02 %/K 3
Capacitive Load 200 µF 24 Vout models, single output 3
Hold-up Time 10 ms acc. to EN 50155 Class S2 3
Start-up Time 30 40 ms 3
Output Current Limitation 145 170 212 % of Iout max. 3
Overvoltage Protection 112 164 % of Vout nom. 3
Transient Response Response Time 250 µs 25% load step 3
Remote On 3 15 VDC Remote On/Off pin on, or open circuit, refers to Remote and -Vin pin 4
Remote Off 0 1.2 VDC Remote off, or short circuit, refers to Remote and -Vin pin 4
Off Idle Input Current 2.5 mA 4
Remote Pin Input Current -0.5 1 mA 4
Operating Temperature -40 90 °C without heatsink 4
Case Temperature 105 °C 4
Storage Temperature -55 125 °C 4
Relative Humidity 95 % non condensing 4
Switching Frequency 300 kHz PWM, other models (±10%) 4
Isolation Resistance 1000 MΩ Input to output, 500 VDC 4
Thermal Impedance Case to Ambient 17 K/W no heatsink 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts Copper Pin Material Copper 4

CAD (Adom-generated)

  • Symbol: THN 15-2415WIR
  • Footprint: Adom_Gen:Traco_Power_THN_15-2_a3be30
  • 3D model: generated to fit the land (STEP)
  • 3D model files: thn-15-2415wir-etched.step / thn-15-2415wir-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); thn-15-2415wir.step / thn-15-2415wir.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Traco Power datasheet (5 pp, sha256 cc13ceb9242e3e7e, retrieved 2026-11-16, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF