main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers thn-15-2413: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
thn-15-2413-etched.glb thn-15-2413: factory component page (tier=mfr) · Ray
thn-15-2413-etched.step thn-15-2413: factory component page (tier=mfr) · Ray
thn-15-2413-hero.glb thn-15-2413: hero GLB from the etched model (keeps the MPN mark) · Ray
thn-15-2413-hero.overlay.json thn-15-2413: hero GLB from the etched model (keeps the MPN mark) · Ray
thn-15-2413.glb Publish 0.1.0 · Ray
thn-15-2413.kicad_mod Publish 0.1.0 · Ray
thn-15-2413.kicad_sym Publish 0.1.0 · Ray
thn-15-2413.lbr Publish 0.1.0 · Ray
thn-15-2413.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

THN 15-2413

Traco Power · Power Supplies - Board Mount · 6-DIP Module

THN 15-2413 from Traco Power, in a 6-DIP Module. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 +Vin (Vcc) power_in Positive input for the 18-36 VDC input range of this model, with surge voltage limited to 50 VDC max. for 100 ms on 24 Vin models.
2 -Vin (GND) power_in Negative input (GND) return for the 18-36 VDC input, which is also the reference for the Remote On/Off pin.
3 +Vout power_out Positive regulated output at 15 VDC nominal, rated for 1'000 mA max. at this model's full load.
4 Trim passive Output voltage adjustment input for single output models, allowing ±10% of nominal by external trim resistor.
5 -Vout power_out Negative output return for the regulated +Vout output.
6 Remote On/Off input Remote control input referenced to -Vin: on at 3.0 to 15 VDC or open circuit, off at 0 to 1.2 VDC or short circuit.

Key specifications

Parameter Value
Manufacturer Traco Power
Package 6-DIP Module
Category Power Supplies - Board Mount
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range 18 24 36 VDC 24 Vin model, 18-36 VDC (24 VDC nom.) 1
Output voltage Vnom 15 VDC 15 Vout single output model 1
Surge voltage 50 VDC 24 Vin models, 100 ms max. 2
Under voltage lockout 14.5 15.5 17.5 VDC 24 Vin models 2
Output voltage adjustment -10 10 % ±10% other models, single output models only, by external trim resistor 2
Voltage set accuracy -1 1 % 3
Regulation input variation 0.2 % single output models, Vmin-Vmax 3
Regulation load variation 0.2 % single output models, 0-100% load 3
Temperature coefficient -0.02 0.02 %/K 3
Capacitive load 660 µF 15 Vout single output models 3
Start-up time 30 ms 3
Output current limitation 120 150 175 % of Iout max. 3
Overvoltage protection 112 164 % of Vout nom. 3
Remote control on voltage 3 15 VDC passive = on, or open circuit; refers to Remote and -Vin pin 4
Remote control off voltage 0 1.2 VDC off, or short circuit; refers to Remote and -Vin pin 4
Remote pin input current -0.5 1 mA 4
Operating temperature -40 85 °C without heatsink; +90°C max with heatsink THN-HS1 4
Case temperature 105 °C 4
Storage temperature -55 125 °C 4
Switching frequency 360 400 440 kHz PWM 4
Isolation test voltage input to case 1000 VDC 60 s 4
Isolation test voltage output to case 1000 VDC 60 s 4
Isolation resistance input to output 1000 MΩ 500 VDC 4
Isolation capacitance input to output 1000 pF 100 kHz, 1 V 4
Thermal impedance case to ambient 18.2 K/W case to ambient, without heatsink 5
Thermal impedance case to ambient with heatsink 15.8 K/W with heatsink THN-HS1 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts Copper Pin Material Copper 4

CAD (Adom-generated)

  • Symbol: THN 15-2413
  • Footprint: Adom_Gen:Traco_Power_THN_15-2_29a51b
  • 3D model: generated to fit the land (STEP)
  • 3D model files: thn-15-2413-etched.step / thn-15-2413-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); thn-15-2413.step / thn-15-2413.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Traco Power datasheet (5 pp, sha256 ff9e377ace1f2691, retrieved 2026-11-16, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF