main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tfptl10l4700fl2b: viewers · Ray
package.json Publish 0.1.2 · Ray
page.json Publish 0.1.2 · Ray
README.md tfptl10l4700fl2b: CAD wording names the Adom_Gen land, not KiCad official · Ray
tfptl10l4700fl2b-etched.glb Publish 0.1.0 · Ray
tfptl10l4700fl2b-etched.step tfptl10l4700fl2b: factory component page (tier=mfr) · Ray
tfptl10l4700fl2b-hero.glb Publish 0.1.1 · Ray
tfptl10l4700fl2b-hero.overlay.json Publish 0.1.1 · Ray
tfptl10l4700fl2b.glb Publish 0.1.0 · Ray
tfptl10l4700fl2b.kicad_mod tfptl10l4700fl2b: no pin-1 polarity bar on an unpolarised two-terminal land · Ray
tfptl10l4700fl2b.kicad_sym Publish 0.1.0 · Ray
tfptl10l4700fl2b.lbr tfptl10l4700fl2b: no pin-1 polarity bar on an unpolarised two-terminal land · Ray
tfptl10l4700fl2b.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 2 pins · Ray

TFPTL10L4700FL2B

Vishay / Dale · Sensors, Transducers · Radial

TFPTL10L4700FL2B from Vishay / Dale, in a Radial. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 1 passive First tinned copper clad steel wire lead (d = 0.5 mm ±10 %, L = 25 mm min. in bulk) of the nickel thin film PTC thermistor, non-polarized and interchangeable with lead 2, with lead spacing F = 2.5 ± 0.8 mm for the L2 version.
2 2 passive Second tinned copper clad steel wire lead (d = 0.5 mm ±10 %, L = 25 mm min. in bulk) of the nickel thin film PTC thermistor, non-polarized and interchangeable with lead 1, with lead spacing F = 2.5 ± 0.8 mm for the L2 version.

Key specifications

Parameter Value
Manufacturer Vishay / Dale
Package Radial
Category Sensors, Transducers
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Tolerance on R25-value -1 1 % MPN tolerance code F = ±1 % 1
Tolerance on TCR at 25 °C -400 400 ppm/K 1
Maximum rated power at 70 °C (P70) P70 75 mW at 70 °C, TFPTL10 1
Maximum working voltage (rated continuous working voltage) RCWV 30 V TFPTL10; note 3 rated continuous working voltage 1
Operating temperature range at rated power -55 70 °C at rated power 1
Operating temperature range at zero dissipation -55 150 °C at zero dissipation 1
Storage dry heat drift ΔR25/R25 ΔR25/R25 -0.25 0.25 % 5000 h at 125 °C 3
High temperature exposure drift ΔR25/R25 ΔR25/R25 -0.3 0.3 % 1000 h at 150 °C 3
Damp heat steady state drift ΔR25/R25 ΔR25/R25 -0.2 0.2 % unloaded, 1344 h at 40 °C/95 % RH 3
Thermal cycling drift ΔR25/R25 (100 cycles) ΔR25/R25 -0.2 0.2 % 15 min at -55 °C, 15 min at 150 °C, 100 cycles 3
Thermal cycling drift ΔR25/R25 (1000 cycles) ΔR25/R25 -0.2 0.2 % 15 min at -55 °C, 15 min at 125 °C, 1000 cycles 3
Short time overload drift ΔR25/R25 ΔR25/R25 -0.2 0.2 % 2.5 x P70 for 60 s at 70 °C 3
Long term dissipation drift ΔR25/R25 ΔR25/R25 -0.2 0.2 % 1000 h rated power at 70 °C 3
Resistance to soldering heat drift ΔR25/R25 ΔR25/R25 -0.25 0.25 % 10 s at 260 °C 3
Ratio tolerance (low temp -55 °C to high temp +150 °C) -4 4 % low temp -55 °C, high temp +150 °C 4
Ratio tolerance (low temp -40 °C to high temp +125 °C) -3 3 % low temp -40 °C, high temp +125 °C 4
Ratio tolerance (low temp -20 °C to high temp +85 °C) -2 2 % low temp -20 °C, high temp +85 °C 4
Ratio tolerance (low temp 0 °C to high temp +55 °C) -1 1 % low temp 0 °C, high temp +55 °C 4
Ratio tolerance (low temp +12 °C to high temp +40 °C) -0.5 0.5 % low temp +12 °C, high temp +40 °C 4
Resistance value at 25 °C R25 470 Ω at 25 °C 1
TCR at 25 °C 4110 ppm/K at 25 °C 1
Response time 1.1 s in oil 1
Dissipation factor δ δ 2.9 mW/K for information only 1

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts steel clad steel wire leads. 1

CAD (Adom-generated)

  • Symbol: TFPTL10L4700FL2B
  • Footprint: Adom_Gen:Vishay_Dale_TFPTL10
  • 3D model: generated to fit the land (STEP)
  • 3D model files: tfptl10l4700fl2b-etched.step / tfptl10l4700fl2b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tfptl10l4700fl2b.step / tfptl10l4700fl2b.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Vishay / Dale datasheet (5 pp, sha256 37dbc9bf4db18bf0, retrieved 2026-11-03, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF