TFPTL10L4700FL2B
Public Made by Adomby adom
Vishay / Dale Sensors, Transducers, Radial. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownTFPTL10L4700FL2B
Vishay / Dale · Sensors, Transducers · Radial
TFPTL10L4700FL2B from Vishay / Dale, in a Radial. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | First tinned copper clad steel wire lead (d = 0.5 mm ±10 %, L = 25 mm min. in bulk) of the nickel thin film PTC thermistor, non-polarized and interchangeable with lead 2, with lead spacing F = 2.5 ± 0.8 mm for the L2 version. |
| 2 | 2 | passive | Second tinned copper clad steel wire lead (d = 0.5 mm ±10 %, L = 25 mm min. in bulk) of the nickel thin film PTC thermistor, non-polarized and interchangeable with lead 1, with lead spacing F = 2.5 ± 0.8 mm for the L2 version. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay / Dale |
| Package | Radial |
| Category | Sensors, Transducers |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Tolerance on R25-value | -1 | 1 | % | MPN tolerance code F = ±1 % | 1 | ||
| Tolerance on TCR at 25 °C | -400 | 400 | ppm/K | 1 | |||
| Maximum rated power at 70 °C (P70) | P70 | 75 | mW | at 70 °C, TFPTL10 | 1 | ||
| Maximum working voltage (rated continuous working voltage) | RCWV | 30 | V | TFPTL10; note 3 rated continuous working voltage | 1 | ||
| Operating temperature range at rated power | -55 | 70 | °C | at rated power | 1 | ||
| Operating temperature range at zero dissipation | -55 | 150 | °C | at zero dissipation | 1 | ||
| Storage dry heat drift ΔR25/R25 | ΔR25/R25 | -0.25 | 0.25 | % | 5000 h at 125 °C | 3 | |
| High temperature exposure drift ΔR25/R25 | ΔR25/R25 | -0.3 | 0.3 | % | 1000 h at 150 °C | 3 | |
| Damp heat steady state drift ΔR25/R25 | ΔR25/R25 | -0.2 | 0.2 | % | unloaded, 1344 h at 40 °C/95 % RH | 3 | |
| Thermal cycling drift ΔR25/R25 (100 cycles) | ΔR25/R25 | -0.2 | 0.2 | % | 15 min at -55 °C, 15 min at 150 °C, 100 cycles | 3 | |
| Thermal cycling drift ΔR25/R25 (1000 cycles) | ΔR25/R25 | -0.2 | 0.2 | % | 15 min at -55 °C, 15 min at 125 °C, 1000 cycles | 3 | |
| Short time overload drift ΔR25/R25 | ΔR25/R25 | -0.2 | 0.2 | % | 2.5 x P70 for 60 s at 70 °C | 3 | |
| Long term dissipation drift ΔR25/R25 | ΔR25/R25 | -0.2 | 0.2 | % | 1000 h rated power at 70 °C | 3 | |
| Resistance to soldering heat drift ΔR25/R25 | ΔR25/R25 | -0.25 | 0.25 | % | 10 s at 260 °C | 3 | |
| Ratio tolerance (low temp -55 °C to high temp +150 °C) | -4 | 4 | % | low temp -55 °C, high temp +150 °C | 4 | ||
| Ratio tolerance (low temp -40 °C to high temp +125 °C) | -3 | 3 | % | low temp -40 °C, high temp +125 °C | 4 | ||
| Ratio tolerance (low temp -20 °C to high temp +85 °C) | -2 | 2 | % | low temp -20 °C, high temp +85 °C | 4 | ||
| Ratio tolerance (low temp 0 °C to high temp +55 °C) | -1 | 1 | % | low temp 0 °C, high temp +55 °C | 4 | ||
| Ratio tolerance (low temp +12 °C to high temp +40 °C) | -0.5 | 0.5 | % | low temp +12 °C, high temp +40 °C | 4 | ||
| Resistance value at 25 °C | R25 | 470 | Ω | at 25 °C | 1 | ||
| TCR at 25 °C | 4110 | ppm/K | at 25 °C | 1 | |||
| Response time | 1.1 | s | in oil | 1 | |||
| Dissipation factor δ | δ | 2.9 | mW/K | for information only | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | steel | clad steel wire leads. | 1 |
CAD (Adom-generated)
- Symbol:
TFPTL10L4700FL2B - Footprint:
Adom_Gen:Vishay_Dale_TFPTL10 - 3D model: generated to fit the land (STEP)
- 3D model files:
tfptl10l4700fl2b-etched.step/tfptl10l4700fl2b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tfptl10l4700fl2b.step/tfptl10l4700fl2b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay / Dale datasheet (5 pp, sha256
37dbc9bf4db18bf0, retrieved 2026-11-03, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.